public/openhab-addons
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fix http -> https where applyable. (#10573)

Browse Source 
Signed-off-by: Jerome Luckenbach <github@luckenba.ch>
This commit is contained in:
Jerome Luckenbach
2021-04-24 20:39:51 +02:00
committed by GitHub
parent 8ba34392aa
commit 10f88c0934
38 changed files with 265 additions and 266 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
bundles/org.openhab.binding.lutron/README.md
View File

@@ -1,6 +1,6 @@
# Lutron Binding
This binding integrates with [Lutron](http://www.lutron.com) lighting control and home automation systems.
This binding integrates with [Lutron](https://www.lutron.com) lighting control and home automation systems.
It contains support for four different types of Lutron systems via different bridge things:
* RadioRA 2, HomeWorks QS, Caseta, RA2 Select, and other current systems that can be controlled via Lutron Integration Protocol (LIP) or LEAP
@@ -540,7 +540,7 @@ Thing cco relay1 [ integrationId=7, outputType="Maintained"]
#### Shades
Each Lutron shade, motorized drape, or QS motor controller output (LQSE-4M-D) is controlled by a **shade** thing.
The only configuration parameter it accepts is `integrationId`.
The only configuration parameter it accepts is `integrationId`.
A single channel *shadelevel* with item type Rollershutter and category Rollershutter will be created for each **shade** thing.
It accepts Percent, Up, Down, Stop and Refresh commands.
@@ -894,7 +894,7 @@ lutron:hwserialbridge:home [serialPort="/dev/ttyUSB1", baudRate="9600]
Dimmers have one required parameter ``address`` that specifies the device address (e.g., [01:01:03:02:04]) and two optional parameters: ``fadeTime`` which sets the time it takes to set the light level when changed, and ``defaultLevel`` which sets the level to use for the dimmer when turning it on (with a switch rather than a slider).
```
lutron:hwdimmer:dimmer1 [address="[01:01:03:02:04]", fadeTime="1", defaultLevel="75"]
lutron:hwdimmer:dimmer1 [address="[01:01:03:02:04]", fadeTime="1", defaultLevel="75"]
```
## Channels
@@ -982,11 +982,11 @@ lutron:grafikeye:home (lutron:prgbridge:home) [ controlUnit=1, fade=10, polling=
* Sunset/sunrise will only be available if configured via the Liasion software
* scenelock, sceneseq, zonelock cannot be determined from the API and will default to OFF on startup
* Replace the "X" on zonelowerX, zoneraiseX, etc with the zone in question. "zonelower1" will affect zone 1. Specifying a zone larger than you have will have no effect (such as using zonelower8 on a Grafik Eye 3506 which only has 6 zones).
* The zonefade value will only be used when zonelower/zonereaise/zoneintensity is issued.
* The zonefade value will only be used when zonelower/zonereaise/zoneintensity is issued.
* zoneshade does not support PercentType nor StopMoveType.Move and those commands will be ignored
* zoneintensity can be used on a shade zone if the intensity is from 0 to 5 and should be used if wanting to set a QED preset: 0=Stop, 1=Open, 2=Close, 3=Preset 1, 4=Preset 2, 5=Preset 3
* zoneintensity can be used on a shade zone if the intensity is from 0 to 5 and should be used if wanting to set a QED preset: 0=Stop, 1=Open, 2=Close, 3=Preset 1, 4=Preset 2, 5=Preset 3
* If you started a zonelower or zoneraise, the only way to stop the action is by executing an all zone stop on the bridge (i.e. zonelowerstop or zoneraisestop). The PRG API does not provide a way to stop the lowering/raising of any specific zone.
## Example