[avmfritz] Added support for HAN-FUN blinds (#10492)

* Added support for HAN-FUN blinds

Closes #10430 

Signed-off-by: Ulrich Mertin <mail@ulrich-mertin.de>
This commit is contained in:
quidam
2021-04-15 17:50:11 +02:00
committed by GitHub
parent 7dad6ea973
commit 18989d7ab7
15 changed files with 436 additions and 9 deletions

View File

@@ -84,6 +84,7 @@ The following sensors have been successfully tested using FRITZ!OS 7 for FRITZ!B
- [SmartHome Bewegungsmelder](https://www.smarthome.de/geraete/telekom-smarthome-bewegungsmelder-innen) - a motion sensor (thing type `HAN_FUN_CONTACT`)
- [SmartHome Rauchmelder](https://www.smarthome.de/geraete/smarthome-rauchmelder-weiss) - a smoke detector (thing type `HAN_FUN_CONTACT`)
- [SmartHome Wandtaster](https://www.smarthome.de/geraete/telekom-smarthome-wandtaster) - a switch with two buttons (thing type `HAN_FUN_SWITCH`)
- [Rollershutter/Blinds](https://www.rademacher.de/shop/rollladen-sonnenschutz/elektrischer-gurtwickler/rollotron-dect-1213) - an electronic belt winder (thing type `HAN_FUN_BLINDS`)
The use of other Sensors should be possible, if these are compatible with DECT-ULE / HAN-FUN standards.
@@ -185,6 +186,7 @@ The AIN (actor identification number) can be found in the FRITZ!Box interface ->
| battery_low | Switch | Battery level low (ON/OFF) - FRITZ!OS 6.80 | FRITZ!DECT 301, FRITZ!DECT 300, Comet DECT, FRITZ!DECT 400, FRITZ!DECT 440 |
| contact_state | Contact | Contact state information (OPEN/CLOSED). | HAN-FUN contact (e.g. SmartHome Tür-/Fensterkontakt or SmartHome Bewegungsmelder)- FRITZ!OS 7 |
| last_change | DateTime | States the last time the button was pressed. | FRITZ!DECT 400, FRITZ!DECT 440, HAN-FUN switch (e.g. SmartHome Wandtaster) - FRITZ!OS 7 |
| rollershutter | Rollershutter | Rollershutter control and status. Accepts UP/DOWN/STOP commands and the opening level in percent. States the opening level in percent. | HAN-FUN blind (e.g. Rolltron DECT 1213) - FRITZ!OS 7 |
### Triggers