[nest] Remove WWN support (#15418)
See: https://support.google.com/googlenest/answer/9293712?hl=en > Starting September 29, 2023, all Works with Nest connections will stop working. Closes #13525 Closes #14761 Signed-off-by: Wouter Born <github@maindrain.net>
This commit is contained in:
Wouter Born
GitHub
@@ -1,51 +1,41 @@
|
||||
# Nest Binding
|
||||
|
||||
The Nest binding integrates devices by [Nest](https://store.google.com/us/category/connected_home?) using the [Smart Device Management](https://developers.google.com/nest/device-access/api) (SDM) API and the Works with Nest (WWN) API.
|
||||
The Nest binding integrates devices by [Nest](https://store.google.com/us/category/connected_home?) using the [Smart Device Management](https://developers.google.com/nest/device-access/api) (SDM) API.
|
||||
|
||||
To be able to use the SDM API it is required to first [register](https://developers.google.com/nest/device-access/registration) and pay a US$5 non-refundable registration fee.
|
||||
|
||||
It is also possible to use the older WWN API with this binding.
|
||||
For this you need to have the account details of a previously registered WWN API account.
|
||||
Another requirement is that you have not yet migrated your Nest account to a Google account (which is irreversible).
|
||||
It is no longer possible to register new WWN API accounts because the WWN API runs in maintenance mode.
|
||||
See also [What's happening at Nest?](https://nest.com/whats-happening/).
|
||||
|
||||
Because the SDM and WWN APIs run on servers in the cloud, a connection with the Internet is required for sending and receiving information.
|
||||
Because the SDM API runs on servers in the cloud, a connection with the Internet is required for sending and receiving information.
|
||||
The binding uses HTTPS to connect to the APIs using port 443.
|
||||
When using the WWN API, the binding also connects to servers on port 9553.
|
||||
So make sure outbound connections to these ports are not blocked by a firewall.
|
||||
|
||||
> Note: This binding no longer supports the Works with Nest (WWN) API because it has been discontinued by Google.
|
||||
See [Support for Works with Nest ending](https://support.google.com/googlenest/answer/9293712).
|
||||
|
||||
## Supported Things
|
||||
|
||||
The table below lists the Nest binding thing types:
|
||||
|
||||
| Things | Description | SDM Thing Type | WWN Thing Type |
|
||||
|-----------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------|----------------|--------------------|
|
||||
| Nest Account (SDM, WWN) | An account for using the Nest (SDM/WWN) REST API | sdm_account | wwn_account |
|
||||
| Nest Cam (Indoor, IQ, Outdoor), Dropcam | A Nest Cam registered with your account | sdm_camera | wwn_camera |
|
||||
| Nest Hello Doorbell | A Nest Doorbell registered with your account | sdm_doorbell | wwn_camera |
|
||||
| Nest Hub (Max) | A Nest Display registered with your account | sdm_display | wwn_camera |
|
||||
| Nest Protect | The smoke detector/Nest Protect for the account | | wwn_smoke_detector |
|
||||
| Nest Thermostat (E) | A Thermostat to control the various aspects of the house's HVAC system | sdm_thermostat | wwn_thermostat |
|
||||
| Structure | The Nest structure defines the house the account has setup on Nest. You will only have more than one structure if you have more than one house | | wwn_structure |
|
||||
| Things | Description | Thing Type |
|
||||
|-----------------------------------------|------------------------------------------------------------------------|----------------|
|
||||
| Nest Account | An account for using the Nest SDM REST API | sdm_account |
|
||||
| Nest Cam (Indoor, IQ, Outdoor), Dropcam | A Nest Cam registered with your account | sdm_camera |
|
||||
| Nest Hello Doorbell | A Nest Doorbell registered with your account | sdm_doorbell |
|
||||
| Nest Hub (Max) | A Nest Display registered with your account | sdm_display |
|
||||
| Nest Thermostat (E) | A Thermostat to control the various aspects of the house's HVAC system | sdm_thermostat |
|
||||
|
||||
The SDM API currently does not support Nest Protect devices.
|
||||
There are no structure Things when using the SDM API, because the SDM API does not support setting the Home/Away status like the WWN API does.
|
||||
|
||||
To use one of the Nest APIs, add the corresponding Account Thing using the UI and configure the required parameters.
|
||||
To use the Nest SDM API, add an Account Thing using the UI and configure the required parameters.
|
||||
After configuring an Account Thing, you can use it to discover the connected devices which are then added the Inbox.
|
||||
|
||||
## SDM Account Configuration
|
||||
## Account Configuration
|
||||
|
||||
### Google Account Requirement
|
||||
|
||||
To be able to use the SDM API it is required that you use a Google Account with your Nest devices.
|
||||
If you still use the WWN API, you can no longer use the WWN API after migrating to a Google Account.
|
||||
So if you have not yet migrated your account, check that all the functionality you require is provided by the SDM API and SDM Things in the binding.
|
||||
Most notably, there is no support for the Nest Protect in the SDM API and you cannot change your Home/Away status.
|
||||
To migrate to a Google account, follow the migration steps in the [Nest accounts FAQ](https://support.google.com/googlenest/answer/9297676?co=GENIE.Platform%3DiOS&hl=en&oco=0#accountmigration&accountmigration1&#accountmigration2&#accountmigration3&zippy=%2Chow-do-i-migrate-my-account)
|
||||
|
||||
### SDM Configuration Parameters
|
||||
### Configuration Parameters
|
||||
|
||||
These parameters configure which SDM project is accessed using the SDM API and configure the OAuth 2.0 client details used for accessing the project.
|
||||
|
||||
@@ -183,22 +173,17 @@ The created subscription can also be monitored using the Google Cloud Platform C
|
||||
Decreasing the `refreshInterval` may cause issues when you have a lot of devices connected because it may cause API rate limits to be exceeded.
|
||||
You may want to decrease the `refreshInterval` for a Thermostat if Pub/Sub events have not been configured to provide state updating.
|
||||
|
||||
## WWN Account Configuration
|
||||
|
||||
To configure the binding to use the WWN API, add a new "Nest WWN Account" Thing in the UI and enter the **Product ID**, **Product Secret** and **Access Token** of an existing WWN account as configuration parameters.
|
||||
It is no longer possible to register new WWN accounts with Nest because the WWN API runs in maintenance mode.
|
||||
|
||||
## Discovery
|
||||
|
||||
The binding will discover all Nest Things from your account when you add and configure a Nest SDM or WWN Account Thing.
|
||||
The binding will discover all Nest Things from your account when you add and configure a Nest Account Thing.
|
||||
|
||||
## Channels
|
||||
|
||||
### SDM/WWN Account Channels
|
||||
### Account Channels
|
||||
|
||||
The account Thing Types do not have any channels.
|
||||
|
||||
### SDM Camera/Display/Doorbell Channels
|
||||
### Camera/Display/Doorbell Channels
|
||||
|
||||
The state of these channels is based on Pub/Sub events sent by the SDM API.
|
||||
So make sure the Pub/Sub account details are properly configured in the `sdm_account`.
|
||||
@@ -222,7 +207,7 @@ The `chime_event` group channels only exist for doorbell Things.
|
||||
Each image channel has the `imageWidth` and `imageHeight` configuration parameters that can be used for configuring the image size in pixels.
|
||||
The maximum camera resolution is listed as `maxImageResolution` property in the Thing properties.
|
||||
|
||||
### SDM Thermostat Channels
|
||||
### Thermostat Channels
|
||||
|
||||
| Channel Type ID | Item Type | Description | Read Write |
|
||||
|---------------------|----------------------|------------------------------------------------------------------------|:----------:|
|
||||
@@ -242,107 +227,6 @@ The maximum camera resolution is listed as `maxImageResolution` property in the
|
||||
The `fan_timer_mode` channel has a `fanTimerDuration` configuration parameter that can be used for configuring how long the fan is ON before it is switched OFF (1s to 43200s).
|
||||
Similarly, when a DateTime command is sent to the `fan_timer_timeout` channel, the fan timer is switched ON and runs until the timestamp in the command (min now+1s, max now+43200s).
|
||||
|
||||
### WWN Camera Channels
|
||||
|
||||
#### Camera Group Channels
|
||||
|
||||
Information about the camera.
|
||||
|
||||
| Channel Type ID | Item Type | Description | Read Write |
|
||||
|-----------------------|-----------|---------------------------------------------------|:----------:|
|
||||
| app_url | String | The app URL to see the camera | R |
|
||||
| audio_input_enabled | Switch | If the audio input is currently enabled | R |
|
||||
| last_online_change | DateTime | Timestamp of the last online status change | R |
|
||||
| public_share_enabled | Switch | If public sharing is currently enabled | R |
|
||||
| public_share_url | String | The URL to see the public share of the camera | R |
|
||||
| snapshot_url | String | The URL to use for a snapshot of the video stream | R |
|
||||
| streaming | Switch | If the camera is currently streaming | R/W |
|
||||
| video_history_enabled | Switch | If the video history is currently enabled | R |
|
||||
| web_url | String | The web URL to see the camera | R |
|
||||
|
||||
#### Last Event Group Channels
|
||||
|
||||
Information about the last camera event (requires Nest Aware subscription).
|
||||
|
||||
| Channel Type ID | Item Type | Description | Read Write |
|
||||
|--------------------|-----------|------------------------------------------------------------------------------------|:----------:|
|
||||
| activity_zones | String | Identifiers for activity zones that detected the event (comma separated) | R |
|
||||
| animated_image_url | String | The URL showing an animated image for the camera event | R |
|
||||
| app_url | String | The app URL for the camera event, allows you to see the camera event in an app | R |
|
||||
| end_time | DateTime | Timestamp when the camera event ended | R |
|
||||
| has_motion | Switch | If motion was detected in the camera event | R |
|
||||
| has_person | Switch | If a person was detected in the camera event | R |
|
||||
| has_sound | Switch | If sound was detected in the camera event | R |
|
||||
| image_url | String | The URL showing an image for the camera event | R |
|
||||
| start_time | DateTime | Timestamp when the camera event started | R |
|
||||
| urls_expire_time | DateTime | Timestamp when the camera event URLs expire | R |
|
||||
| web_url | String | The web URL for the camera event, allows you to see the camera event in a web page | R |
|
||||
|
||||
### WWN Smoke Detector Channels
|
||||
|
||||
| Channel Type ID | Item Type | Description | Read Write |
|
||||
|-----------------------|-----------|-----------------------------------------------------------------------------------|:----------:|
|
||||
| co_alarm_state | String | The carbon monoxide alarm state of the Nest Protect (OK, EMERGENCY, WARNING) | R |
|
||||
| last_connection | DateTime | Timestamp of the last successful interaction with Nest | R |
|
||||
| last_manual_test_time | DateTime | Timestamp of the last successful manual test | R |
|
||||
| low_battery | Switch | Reports whether the battery of the Nest protect is low (if it is battery powered) | R |
|
||||
| manual_test_active | Switch | Manual test active at the moment | R |
|
||||
| smoke_alarm_state | String | The smoke alarm state of the Nest Protect (OK, EMERGENCY, WARNING) | R |
|
||||
| ui_color_state | String | The current color of the ring on the smoke detector (GRAY, GREEN, YELLOW, RED) | R |
|
||||
|
||||
### WWN Structure Channels
|
||||
|
||||
| Channel Type ID | Item Type | Description | Read Write |
|
||||
|------------------------------|-----------|--------------------------------------------------------------------------------------------------------|:----------:|
|
||||
| away | String | Away state of the structure (HOME, AWAY) | R/W |
|
||||
| country_code | String | Country code of the structure ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)) | R |
|
||||
| co_alarm_state | String | Carbon Monoxide alarm state (OK, EMERGENCY, WARNING) | R |
|
||||
| eta_begin | DateTime | Estimated time of arrival at home, will setup the heat to turn on and be warm | R |
|
||||
| peak_period_end_time | DateTime | Peak period end for the Rush Hour Rewards program | R |
|
||||
| peak_period_start_time | DateTime | Peak period start for the Rush Hour Rewards program | R |
|
||||
| postal_code | String | Postal code of the structure | R |
|
||||
| rush_hour_rewards_enrollment | Switch | If rush hour rewards system is enabled or not | R |
|
||||
| security_state | String | Security state of the structure (OK, DETER) | R |
|
||||
| smoke_alarm_state | String | Smoke alarm state (OK, EMERGENCY, WARNING) | R |
|
||||
| time_zone | String | The time zone for the structure ([IANA time zone format](https://www.iana.org/time-zones)) | R |
|
||||
|
||||
### WWN Thermostat Channels
|
||||
|
||||
| Channel Type ID | Item Type | Description | Read Write |
|
||||
|-----------------------------|----------------------|----------------------------------------------------------------------------------------|:----------:|
|
||||
| can_cool | Switch | If the thermostat can actually turn on cooling | R |
|
||||
| can_heat | Switch | If the thermostat can actually turn on heating | R |
|
||||
| eco_max_set_point | Number:Temperature | The eco range max set point temperature | R |
|
||||
| eco_min_set_point | Number:Temperature | The eco range min set point temperature | R |
|
||||
| fan_timer_active | Switch | If the fan timer is engaged | R/W |
|
||||
| fan_timer_duration | Number:Time | Length of time that the fan is set to run (15, 30, 45, 60, 120, 240, 480, 960 minutes) | R/W |
|
||||
| fan_timer_timeout | DateTime | Timestamp when the fan stops running | R |
|
||||
| has_fan | Switch | If the thermostat can control the fan | R |
|
||||
| has_leaf | Switch | If the thermostat is currently in a leaf mode | R |
|
||||
| humidity | Number:Dimensionless | Indicates the current relative humidity | R |
|
||||
| last_connection | DateTime | Timestamp of the last successful interaction with Nest | R |
|
||||
| locked | Switch | If the thermostat has the temperature locked to only be within a set range | R |
|
||||
| locked_max_set_point | Number:Temperature | The locked range max set point temperature | R |
|
||||
| locked_min_set_point | Number:Temperature | The locked range min set point temperature | R |
|
||||
| max_set_point | Number:Temperature | The max set point temperature | R/W |
|
||||
| min_set_point | Number:Temperature | The min set point temperature | R/W |
|
||||
| mode | String | Current mode of the Nest thermostat (HEAT, COOL, HEAT_COOL, ECO, OFF) | R/W |
|
||||
| previous_mode | String | The previous mode of the Nest thermostat (HEAT, COOL, HEAT_COOL, ECO, OFF) | R |
|
||||
| state | String | The active state of the Nest thermostat (HEATING, COOLING, OFF) | R |
|
||||
| temperature | Number:Temperature | Current temperature | R |
|
||||
| time_to_target | Number:Time | Time left to the target temperature approximately | R |
|
||||
| set_point | Number:Temperature | The set point temperature | R/W |
|
||||
| sunlight_correction_active | Switch | If sunlight correction is active | R |
|
||||
| sunlight_correction_enabled | Switch | If sunlight correction is enabled | R |
|
||||
| using_emergency_heat | Switch | If the system is currently using emergency heat | R |
|
||||
|
||||
Note that the Nest API rounds Thermostat values so they will differ from what shows up in the Nest App.
|
||||
The Nest API applies the following rounding:
|
||||
|
||||
- degrees Celsius to 0.5 degrees
|
||||
- degrees Fahrenheit to whole degrees
|
||||
- humidity to 5%
|
||||
|
||||
## Example
|
||||
|
||||
You can use the discovery functionality of the binding to obtain the deviceId and structureId values for defining Nest things in files.
|
||||
@@ -400,93 +284,3 @@ Number:Temperature Thermostat_Target_temperature "Target Temperature [%.1f %un
|
||||
Number:Temperature Thermostat_Temperature_Cool "Temperature Cool [%.1f %unit%]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:temperature_cool" }
|
||||
Number:Temperature Thermostat_Temperature_Heat "Temperature Heat [%.1f %unit%]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:temperature_heat" }
|
||||
```
|
||||
|
||||
### wwn-demo.things
|
||||
|
||||
```java
|
||||
Bridge nest:wwn_account:demo_wwn_account [ productId="8fdf9885-ca07-4252-1aa3-f3d5ca9589e0", productSecret="QITLR3iyUlWaj9dbvCxsCKp4f", accessToken="c.6rse1xtRk2UANErcY0XazaqPHgbvSSB6owOrbZrZ6IXrmqhsr9QTmcfaiLX1l0ULvlI5xLp01xmKeiojHqozLQbNM8yfITj1LSdK28zsUft1aKKH2mDlOeoqZKBdVIsxyZk4orH0AvKEZ5aY" ] {
|
||||
Thing wwn_camera fish_cam [ deviceId="qw0NNE8ruxA9AGJkTaFH3KeUiJaONWKiH9Gh3RwwhHClonIexTtufQ" ]
|
||||
Thing wwn_smoke_detector hallway_smoke [ deviceId="Tzvibaa3lLKnHpvpi9OQeCI_z5rfkBAV" ]
|
||||
Thing wwn_structure home [ structureId="20wKjydArmMV3kOluTA7JRcZg8HKBzTR-G_2nRXuIN1Bd6laGLOJQw" ]
|
||||
Thing wwn_thermostat living_thermostat [ deviceId="ZqAKzSv6TO6PjBnOCXf9LSI_z5rfkBAV" ]
|
||||
}
|
||||
```
|
||||
|
||||
### wwn-demo.items
|
||||
|
||||
```java
|
||||
/* WWN Camera */
|
||||
String Cam_App_URL "App URL [%s]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:camera#app_url" }
|
||||
Switch Cam_Audio_Input_Enabled "Audio Input Enabled" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:camera#audio_input_enabled" }
|
||||
DateTime Cam_Last_Online_Change "Last Online Change [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:camera#last_online_change" }
|
||||
String Cam_Snapshot_URL "Snapshot URL [%s]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:camera#snapshot_url" }
|
||||
Switch Cam_Streaming "Streaming" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:camera#streaming" }
|
||||
Switch Cam_Public_Share_Enabled "Public Share Enabled" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:camera#public_share_enabled" }
|
||||
String Cam_Public_Share_URL "Public Share URL [%s]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:camera#public_share_url" }
|
||||
Switch Cam_Video_History_Enabled "Video History Enabled" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:camera#video_history_enabled" }
|
||||
String Cam_Web_URL "Web URL [%s]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:camera#web_url" }
|
||||
String Cam_LE_Activity_Zones "Last Event Activity Zones [%s]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:last_event#activity_zones" }
|
||||
String Cam_LE_Animated_Image_URL "Last Event Animated Image URL [%s]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:last_event#animated_image_url" }
|
||||
String Cam_LE_App_URL "Last Event App URL [%s]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:last_event#app_url" }
|
||||
DateTime Cam_LE_End_Time "Last Event End Time [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:last_event#end_time" }
|
||||
Switch Cam_LE_Has_Motion "Last Event Has Motion" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:last_event#has_motion" }
|
||||
Switch Cam_LE_Has_Person "Last Event Has Person" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:last_event#has_person" }
|
||||
Switch Cam_LE_Has_Sound "Last Event Has Sound" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:last_event#has_sound" }
|
||||
String Cam_LE_Image_URL "Last Event Image URL [%s]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:last_event#image_url" }
|
||||
DateTime Cam_LE_Start_Time "Last Event Start Time [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:last_event#start_time" }
|
||||
DateTime Cam_LE_URLs_Expire_Time "Last Event URLs Expire Time [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:last_event#urls_expire_time" }
|
||||
String Cam_LE_Web_URL "Last Event Web URL [%s]" { channel="nest:wwn_camera:demo_wwn_account:fish_cam:last_event#web_url" }
|
||||
|
||||
/* WWN Smoke Detector */
|
||||
String Smoke_CO_Alarm "CO Alarm [%s]" { channel="nest:wwn_smoke_detector:demo_wwn_account:hallway_smoke:co_alarm_state" }
|
||||
Switch Smoke_Battery_Low "Battery Low" { channel="nest:wwn_smoke_detector:demo_wwn_account:hallway_smoke:low_battery" }
|
||||
Switch Smoke_Manual_Test "Manual Test" { channel="nest:wwn_smoke_detector:demo_wwn_account:hallway_smoke:manual_test_active" }
|
||||
DateTime Smoke_Last_Connection "Last Connection [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:wwn_smoke_detector:demo_wwn_account:hallway_smoke:last_connection" }
|
||||
DateTime Smoke_Last_Manual_Test "Last Manual Test [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:wwn_smoke_detector:demo_wwn_account:hallway_smoke:last_manual_test_time" }
|
||||
String Smoke_Smoke_Alarm "Smoke Alarm [%s]" { channel="nest:wwn_smoke_detector:demo_wwn_account:hallway_smoke:smoke_alarm_state" }
|
||||
String Smoke_UI_Color "UI Color [%s]" { channel="nest:wwn_smoke_detector:demo_wwn_account:hallway_smoke:ui_color_state" }
|
||||
|
||||
/* WWN Thermostat */
|
||||
Switch Thermostat_Can_Cool "Can Cool" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:can_cool" }
|
||||
Switch Thermostat_Can_Heat "Can Heat" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:can_heat" }
|
||||
Number:Temperature Therm_EMaxSP "Eco Max Set Point [%.1f %unit%]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:eco_max_set_point" }
|
||||
Number:Temperature Therm_EMinSP "Eco Min Set Point [%.1f %unit%]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:eco_min_set_point" }
|
||||
Switch Thermostat_FT_Active "Fan Timer Active" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:fan_timer_active" }
|
||||
Number:Time Thermostat_FT_Duration "Fan Timer Duration [%d %unit%]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:fan_timer_duration" }
|
||||
DateTime Thermostat_FT_Timeout "Fan Timer Timeout [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:fan_timer_timeout" }
|
||||
Switch Thermostat_Has_Fan "Has Fan" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:has_fan" }
|
||||
Switch Thermostat_Has_Leaf "Has Leaf" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:has_leaf" }
|
||||
Number:Dimensionless Therm_Hum "Humidity [%.1f %unit%]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:humidity" }
|
||||
DateTime Thermostat_Last_Conn "Last Connection [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:last_connection" }
|
||||
Switch Thermostat_Locked "Locked" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:locked" }
|
||||
Number:Temperature Therm_LMaxSP "Locked Max Set Point [%.1f %unit%]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:locked_max_set_point" }
|
||||
Number:Temperature Therm_LMinSP "Locked Min Set Point [%.1f %unit%]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:locked_min_set_point" }
|
||||
Number:Temperature Therm_Max_SP "Max Set Point [%.1f %unit%]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:max_set_point" }
|
||||
Number:Temperature Therm_Min_SP "Min Set Point [%.1f %unit%]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:min_set_point" }
|
||||
String Thermostat_Mode "Mode [%s]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:mode" }
|
||||
String Thermostat_Previous_Mode "Previous Mode [%s]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:previous_mode" }
|
||||
String Thermostat_State "State [%s]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:state" }
|
||||
Number:Temperature Thermostat_SP "Set Point [%.1f %unit%]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:set_point" }
|
||||
Switch Thermostat_Sunlight_CA "Sunlight Correction Active" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:sunlight_correction_active" }
|
||||
Switch Thermostat_Sunlight_CE "Sunlight Correction Enabled" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:sunlight_correction_enabled" }
|
||||
Number:Temperature Therm_Temp "Temperature [%.1f %unit%]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:temperature" }
|
||||
Number:Time Therm_Time_To_Target "Time To Target [%d %unit%]" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:time_to_target" }
|
||||
Switch Thermostat_Using_Em_Heat "Using Emergency Heat" { channel="nest:wwn_thermostat:demo_wwn_account:living_thermostat:using_emergency_heat" }
|
||||
|
||||
/* WWN Structure */
|
||||
String Home_Away "Away [%s]" { channel="nest:wwn_structure:demo_wwn_account:home:away" }
|
||||
String Home_Country_Code "Country Code [%s]" { channel="nest:wwn_structure:demo_wwn_account:home:country_code" }
|
||||
String Home_CO_Alarm_State "CO Alarm State [%s]" { channel="nest:wwn_structure:demo_wwn_account:home:co_alarm_state" }
|
||||
DateTime Home_ETA "ETA [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:wwn_structure:demo_wwn_account:home:eta_begin" }
|
||||
DateTime Home_PP_End_Time "PP End Time [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:wwn_structure:demo_wwn_account:home:peak_period_end_time" }
|
||||
DateTime Home_PP_Start_Time "PP Start Time [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:wwn_structure:demo_wwn_account:home:peak_period_start_time" }
|
||||
String Home_Postal_Code "Postal Code [%s]" { channel="nest:wwn_structure:demo_wwn_account:home:postal_code" }
|
||||
Switch Home_Rush_Hour_Rewards "Rush Hour Rewards" { channel="nest:wwn_structure:demo_wwn_account:home:rush_hour_rewards_enrollment" }
|
||||
String Home_Security_State "Security State [%s]" { channel="nest:wwn_structure:demo_wwn_account:home:security_state" }
|
||||
String Home_Smoke_Alarm_State "Smoke Alarm State [%s]" { channel="nest:wwn_structure:demo_wwn_account:home:smoke_alarm_state" }
|
||||
String Home_Time_Zone "Time Zone [%s]" { channel="nest:wwn_structure:demo_wwn_account:home:time_zone" }
|
||||
```
|
||||
|
||||
## Attribution
|
||||
|
||||
This documentation contains parts written by John Cocula which were copied from the 1.0 Nest binding.
|
||||
|
||||
Reference in New Issue
Block a user