public/openhab-addons
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fix Zigbee name stylization (#13954)

Browse Source 
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
This commit is contained in:
Jacob Laursen
2022-12-17 17:25:38 +01:00
committed by GitHub
parent d20b10317c
commit 6753234e32
30 changed files with 114 additions and 114 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
bundles/org.openhab.binding.plugwise/README.md
View File

@@ -1,6 +1,6 @@
# Plugwise Binding
The Plugwise binding adds support to openHAB for [Plugwise](https://www.plugwise.com) ZigBee devices using the Stick.
The Plugwise binding adds support to openHAB for [Plugwise](https://www.plugwise.com) Zigbee devices using the Stick.
Users should use the Plugwise Source software to define the network, reset devices or perform firmware upgrades.
@@ -14,11 +14,11 @@ The binding supports the following Plugwise devices:
| Device Type | Description | Thing Type |
|-------------|------------------------------------------------------------------------------------------|------------|
| Circle | A power outlet plug that provides energy measurement and switching control of appliances | circle |
| Circle+ | A special Circle that coordinates the ZigBee network and acts as network gateway | circleplus |
| Circle+ | A special Circle that coordinates the Zigbee network and acts as network gateway | circleplus |
| Scan | A wireless motion (PIR) and light sensor | scan |
| Sense | A wireless temperature and humidity sensor | sense |
| Stealth | A Circle with a more compact form factor that can be built-in | stealth |
| Stick | A ZigBee USB controller that openHAB uses to communicate with the Circle+ | stick |
| Stick | A Zigbee USB controller that openHAB uses to communicate with the Circle+ | stick |
| Switch | A wireless wall switch | switch |
## Discovery
@@ -44,7 +44,7 @@ Similarly the MAC addresses of the Scan, Sense and Switch can also be obtained f
| Configuration Parameter | Required | Default | Description |
|-------------------------|----------|--------------|-----------------------------------------------------------------------------------|
| serialPort | X | /dev/ttyUSB0 | The serial port of the Stick, e.g. "/dev/ttyUSB0" for Linux or "COM1" for Windows |
| messageWaitTime | | 150 | The time to wait between messages sent on the ZigBee network (in ms) |
| messageWaitTime | | 150 | The time to wait between messages sent on the Zigbee network (in ms) |
To determine the serial port in Linux, insert the Stick, then execute the `dmesg` command.
The last few lines of the output will contain the USB port of the Stick (e.g. `/dev/ttyUSB0`).
@@ -60,7 +60,7 @@ To access the serial port of the Stick on Linux, the user running openHAB needs
| powerStateChanging | | commandSwitching | Controls if the power state can be changed with commands or is always on/off (commandSwitching, alwaysOn or alwaysOff) |
| suppliesPower | | false | Enables power production measurements (true or false) |
| measurementInterval | | 60 | The energy measurement interval (in minutes) (5 to 60) |
| temporarilyNotInNetwork | | false | Stops searching for an unplugged device on the ZigBee network traffic (true or false) |
| temporarilyNotInNetwork | | false | Stops searching for an unplugged device on the Zigbee network traffic (true or false) |
### Scan