added migrated 2.x add-ons

Signed-off-by: Kai Kreuzer <kai@openhab.org>

bundles/org.openhab.binding.elerotransmitterstick/README.md

@@ -0,0 +1,96 @@
+# Elero Transmitter Stick Binding
+
+Allows to control Elero rollershutters through a connected Elero Transmitter Stick. 
+
+## Supported Things
+
+| Things                  | Description                                                                          | Thing Type   |
+|-------------------------|--------------------------------------------------------------------------------------|--------------|
+| Elero Transmitter Stick | Represents the physical Elero Transmitter Stick connected to a USB port              | elerostick   |
+| Elero Channel           | Represents one of the channels of an Elero Transmitter Stick                         | elerochannel |
+
+## Discovery
+
+Discovery is supported only for Elero Channels. Just press the button in order to put it into your inbox after you have successfully manually created an Elero Transmitter Stick.
+
+## Thing Configuration
+
+### Elero Transmitter Stick
+
+| Parameter     | Item Type | Description                                                                                                                                  |
+|---------------|-----------|----------------------------------------------------------------------------------------------------------------------------------------------|
+| Port Name       | String    | The serial port name for the USB receiver / LaCrosseGateway. Valid values are e.g. COM1 for Windows and /dev/ttyS0 or /dev/ttyUSB0 for Linux |
+| Update Interval | Number    | The number of seconds to wait before polling a single channel again (default is 30 seconds) |
+
+### Elero Channel
+
+| Parameter     | Item Type | Description                                                                                                                                  |
+|---------------|-----------|----------------------------------------------------------------------------------------------------------------------------------------------|
+| Channel ID | Number    | The ID of one of the 15 channels that are available on the stick (in the range of 1-15) |
+
+## Channels
+
+### Elero Channel
+
+| Channel Type ID | Item Type             | Description                                       |
+|-----------------|-----------------------|---------------------------------------------------|
+| control         | Rollershutter         | The channel allowing to control the shutter       |
+| status          | String                | Readonly channel providing a string with status information from the Elero Channel. Possible values are: NO_INFORMATION, TOP, BOTTOM, INTERMEDIATE, VENTILATION, BLOCKING, OVERHEATED, TIMEOUT, START_MOVE_UP, START_MOVE_DOWN, MOVING_UP, MOVING_DOWN, STOPPED, TOP_TILT, BOTTOM_INTERMEDIATE, SWITCHED_OFF, SWITCHED_ON |
+
+#### control
+
+The binding does not support all percentage values as the Elero API does not allow to drive shutter to an exact position.
+It only accepts the following distinct percentages:
+
+Percentage | Rollershutter Command | Result                                            |
+-----------|-----------------------|---------------------------------------------------|
+0          | UP                    | rollershutter drives completely up                |
+25         | -                     | rollershutter drives to the INTERMEDIATE position |
+75         | -                     | rollershutter drives to the VENTILATION position  |
+100        | DOWN                  | rollershutter drives completely down              |
+
+#### status
+
+Status values reported by the stick are translated to percentages using the following mapping:
+
+Status              | Rollershutter Percentage |
+--------------------|--------------------------|
+NO_INFORMATION      | -                        |
+TOP                 | 0                        |
+BOTTOM              | 100                      |
+INTERMEDIATE        | 25                       |
+VENTILATION         | 75                       |
+BLOCKING            | 50                       |
+OVERHEATED          | 50                       |
+TIMEOUT             | 50                       |
+START_MOVE_UP       | 50                       |
+START_MOVE_DOWN     | 50                       |
+MOVING_UP           | 50                       |
+MOVING_DOWN         | 50                       |
+STOPPED             | 50                       |
+TOP_TILT            | 50                       |
+BOTTOM_INTERMEDIATE | 50                       |
+SWITCHED_OFF        | 50                       |
+SWITCHED_ON         | 50                       |
+
+## Full Example
+
+A typical thing configuration looks like this:
+
+```
+Bridge elerotransmitterstick:elerostick:0a0a0a0a [ portName="/dev/ttyElero2", updateInterval=5000 ]
+Thing elerotransmitterstick:elerochannel:0a0a0a0a:1 (elerotransmitterstick:elerostick:0a0a0a0a) [ channelId=1 ]
+```
+
+A typical item configuration for a rollershutter looks like this:
+
+```
+Rollershutter Rollershutter1 {channel="elerotransmitterstick:elerochannel:0a0a0a0a:1:control",autoupdate="false" }
+String Rollershutter1State  {channel="elerotransmitterstick:elerochannel:0a0a0a0a:1:status" } 
+```
+
+A sitemap entry looks like this:
+
+```
+Selection item=Rollershutter1 label="Kitchen" mappings=[0="open", 100="closed", 25="shading"]
+```