added migrated 2.x add-ons

Signed-off-by: Kai Kreuzer <kai@openhab.org>

bundles/org.openhab.binding.lirc/README.md

@@ -0,0 +1,87 @@
+# LIRC Binding
+
+This binding integrates infrared transceivers through [LIRC](http://www.lirc.org) or [WinLIRC](http://winlirc.sourceforge.net).
+
+A list of remote configuration files for LIRC is available [here](http://lirc-remotes.sourceforge.net/remotes-table.html).
+
+
+## Supported Things
+
+This binding supports LIRC and WinLIRC as bridges for accessing the configured remotes.
+
+LIRC must be started with TCP enabled. On systemd based systems, TCP can be enabled by editing the file
+`/usr/lib/systemd/system/lirc.service` and adding `--listen` to the end of the `ExecStart` line. An example
+systemd service file for LIRC is shown below.
+
+```ini
+[Unit]
+Description=Linux Infrared Remote Control
+After=network.target
+
+[Service]
+RuntimeDirectory=lirc
+ExecStart=/usr/sbin/lircd --nodaemon --driver=default --device=/dev/lirc0 --listen
+
+[Install]
+WantedBy=multi-user.target
+```
+
+By default, LIRC will listen on IP address 0.0.0.0 (any available IP address) and port 8765. If you would
+rather run LIRC on a specific port or IP address, you can use `--listen=192.168.1.100:9001` instead.
+
+
+## Discovery
+
+Discovery of the LIRC bridge is not supported. However, remotes will be automatically discovered once
+a bridge is configured.
+
+## Example Configuration
+
+### Things
+
+```xtend
+Bridge lirc:bridge:local [ host="192.168.1.120", portNumber="9001" ] {
+    Thing remote Onkyo_RC_799M [ remote="Onkyo_RC-799M" ]
+    Thing remote Samsung [ remote="Samsung" ]
+}
+```
+
+Bridge:
+
+* **host**: IP address or hostname of the LIRC server. Defaults to localhost
+* **port**: The port number the LIRC server is listening on. Defaults to 8765
+
+Remote:
+
+* **remote**: The name of the remote as known by LIRC
+
+### Items
+
+```xtend
+String Remote_AVReceiver { channel="lirc:remote:local:Onkyo_RC_799M:transmit" }
+String Remote_TV { channel="lirc:remote:local:Samsung:transmit" }
+```
+
+### Rules
+
+```xtend
+rule "LIRC Test"
+when
+    Channel 'lirc:remote:local:Samsung:event' triggered KEY_DVD
+then
+    // Toggle base boost on the AV Receiver
+    Remote_AVReceiver.sendCommand("KEY_BASEBOOST")
+    // Increase the volume by 5.
+    Remote_AVReceiver.sendCommand("KEY_VOLUMEUP 5")
+end
+```
+
+
+## Channels
+
+This binding currently supports following channels:
+
+| Channel Type ID | Item Type    | Description                           |
+|-----------------|--------------|---------------------------------------|
+| event           | Trigger      | Triggers when a button is pressed.    |
+| transmit        | String       | Used to transmit IR commands to LIRC. |