added migrated 2.x add-ons

Signed-off-by: Kai Kreuzer <kai@openhab.org>

bundles/org.openhab.binding.shelly/src/main/resources/OH-INF/i18n/shelly.properties

@@ -0,0 +1,56 @@
+discovery.failed# Config status messages
+config-status.error.missing-device-ip=IP address of the Shelly device is missing.
+
+# Thing status descriptions
+offline.conf-error-no-credentials = Device is password protected, but no credentials have been configured.
+offline.conf-error-access-denied = Access denied, check user id and password.
+offline.conf-error-wrong-mode = Device is no longer in the configured device mode {0}, required {1}. Delete the thing and re-discover the device.
+offline.status-error-timeout = Device is not reachable (API timeout).
+offline.status-error-unexpected-api-result = An unexpected API response. Please verify the logfile to get more detailed information.
+offline.status-error-watchdog = Device is not responding, seems to be unavailable.
+offline.status-error-restarted = The device has restarted and will be re-initialized.
+
+message.versioncheck.failed = Unable to check firmware version: {0}
+message.versioncheck.beta = Device is running a Beta version: {0}/{1} ({2}),make sure this is newer than {3} release build.
+message.versioncheck.tooold = WARNING: Firmware might be too old, installed: {0}/{1} ({2}), required minimal {3}.
+message.versioncheck.update = INFO: New firmware available: current version: {0}, new version: {1}
+message.versioncheck.autocoiot = INFO: Firmware is full-filling the minimum version to auto-enable CoIoT
+message.roller.calibrating = Device is not calibrated, use Shelly App to perform initial roller calibration.
+message.init.noipaddress = Unable to detect local IP address. Please make sure that IPv4 is enabled for this interface and check openHAB Network Configuration.
+message.init.protected = Device is password protected, enter correct credentials in thing configuration.
+message.command.failed = ERROR: Unable to process command {0} for channel {1}
+message.command.init = Thing not yet initialized, command {0} triggers initialization
+message.statusupdate.failed = Unable to update status
+message.event.triggered = Event triggered: {0}
+message.coap.init.failed = Unable to start CoIoT: {0}
+message.discovery.disabled = Device is marked as non-discoverable -> skip
+message.discovery.protected = Device {0} reported 'Access defined' (missing userid/password or incorrect).
+message.discovery.failed = Device discovery of device  with IP address {0} failed: {1}
+
+# Device
+channel-type.shelly.deviceName.label = Device Name
+channel-type.shelly.deviceName.description = Symbolic Device Name as configured in the Shelly App.
+
+# Relay, external sensors
+channel-type.shelly.outputName.label = Output Name
+channel-type.shelly.outputName.description = Output/Channel Name as configured in the Shelly App.
+channel-type.shelly.temperature1.label = Temperature 1
+channel-type.shelly.temperature1.description = Temperature of external Sensor #1
+channel-type.shelly.temperature2.label = Temperature 2
+channel-type.shelly.temperature2.description = Temperature of external Sensor #2
+channel-type.shelly.temperature3.label = Temperature 3
+channel-type.shelly.temperature3.description = Temperature of external Sensor #3
+channel-type.shelly.humidity.label = Humidity
+channel-type.shelly.humidity.description = Relative humidity (0..100%)
+
+# Roller
+channel-type.shelly.rollerState.label = State
+channel-type.shelly.rollerState.description = State of the roller (open/closed/stopped).
+
+
+# LED disable
+channel-type.shelly.ledPowerDisable.label = Disable Power LED
+channel-type.shelly.ledPowerDisable.description = ON: The power status LED will be decativated
+channel-type.shelly.ledStatusDisable.label = Disable Status LED
+channel-type.shelly.ledStatusDisable.description = ON: The WiFi status LED will be decativated
+