[comfoair] Re-implement device options as channels (#8829)
Signed-off-by: Hans Böhm <h.boehm@gmx.at>
This commit is contained in:
boehan
GitHub
@@ -47,8 +47,6 @@ For the thing creation, the appropriate serial port has to be set.
|
||||
## Channels
|
||||
|
||||
The ComfoAir binding supports the following channels.
|
||||
Some channels are added dynamically based on installed device options.
|
||||
Available device options are shown in thing properties.
|
||||
|
||||
| Channel ID | Item Type | Label | Description | Read Only | Advanced |
|
||||
|------------------------------------|--------------------------|---------------------------------|---------------------------------------------------------------------------------------------|-----------|----------|
|
||||
@@ -78,10 +76,10 @@ Available device options are shown in thing properties.
|
||||
| temperatures#isT2Sensor | Switch | Sensor T2 Available | Availability of temperature sensor T2 (indoor in) | true | yes |
|
||||
| temperatures#isT3Sensor | Switch | Sensor T3 Available | Availability of temperature sensor T3 (indoor out) | true | yes |
|
||||
| temperatures#isT4Sensor | Switch | Sensor T4 Available | Availability of temperature sensor T4 (outdoor out) | true | yes |
|
||||
| temperatures#isEWTSensor | Switch | EWT Sensor Available | Availability of EWT temperature sensor | true | yes |
|
||||
| temperatures#isEWTSensor | Switch | GHX Sensor Available | Availability of geothermal heat exchanger temperature sensor | true | yes |
|
||||
| temperatures#isHeaterSensor | Switch | Heater Sensor Available | Availability of heater temperature sensor | true | yes |
|
||||
| temperatures#isCookerhoodSensor | Switch | Cookerhood Sensor Available | Availability of cookerhood temperature sensor | true | yes |
|
||||
| temperatures#ewtTemperature | Number:Temperature | EWT Temperature | Temperature of geothermal heat exchanger sensor | true | yes |
|
||||
| temperatures#ewtTemperature | Number:Temperature | GHX Temperature | Temperature of geothermal heat exchanger sensor | true | yes |
|
||||
| temperatures#heaterTemperature | Number:Temperature | Heater Temperature | Temperature of heater sensor | true | yes |
|
||||
| temperatures#cookerhoodTemperature | Number:Temperature | Cookerhood Temperature | Temperature of cookerhood sensor | true | yes |
|
||||
| **Uptimes** | | | | | |
|
||||
@@ -114,46 +112,57 @@ Available device options are shown in thing properties.
|
||||
| menuP2#RFLongDelay | Number | Menu P26 | End delay (RF long actuation) for ventilation level 3 (min) | false | yes |
|
||||
| menuP2#cookerhoodDelay | Number | Menu P20 | End delay for cooker hood control (min) | false | yes |
|
||||
| **Menu P9: Option States** | | | | | |
|
||||
| menuP9#chimneyState (dynamic) | Switch | Chimney Control State | State of the chimney control | true | yes |
|
||||
| menuP9#bypassState (dynamic) | Switch | Bypass State | State of the bypass (ON = open / OFF = closed) | true | yes |
|
||||
| menuP9#ewtState (dynamic) | Switch | EWT State | State of the EWT valve (ON = open / OFF = closed) | true | yes |
|
||||
| menuP9#heaterState (dynamic) | Switch | Heater State | State of the heater | true | yes |
|
||||
| menuP9#chimneyState | Switch | Chimney Control State | State of the chimney control | true | yes |
|
||||
| menuP9#bypassState | Switch | Bypass State | State of the bypass (ON = open / OFF = closed) | true | yes |
|
||||
| menuP9#ewtState | Switch | GHX State | State of the geothermal heat exchanger valve (ON = open / OFF = closed) | true | yes |
|
||||
| menuP9#heaterState | Switch | Heater State | State of the heater | true | yes |
|
||||
| menuP9#vControlState | Switch | 0-10V Control State | State of the 0-10V control | true | yes |
|
||||
| menuP9#frostState (dynamic) | Switch | Antifrost State | State of the antifrost control | true | yes |
|
||||
| menuP9#cookerhoodState (dynamic) | Switch | Cookerhood State | State of the cookerhood control | true | yes |
|
||||
| menuP9#enthalpyState (dynamic) | Switch | Enthalpy State | State of the enthalpy module | true | yes |
|
||||
| menuP9#frostState | Switch | Antifrost State | State of the antifrost control | true | yes |
|
||||
| menuP9#cookerhoodState | Switch | Cookerhood State | State of the cookerhood control | true | yes |
|
||||
| menuP9#enthalpyState | Switch | Enthalpy State | State of the enthalpy module | true | yes |
|
||||
| **Error States** | | | | | |
|
||||
| errors#filterError | Switch | Filter Error | Filter full | true | no |
|
||||
| errors#errorsCurrent | String | Errors Current | Current errors | true | no |
|
||||
| errors#errorsLast | String | Errors Last | Last errors | true | yes |
|
||||
| errors#errorsPrelast | String | Errors Prelast | Prelast errors | true | yes |
|
||||
| errors#errorsPrePrelast | String | Errors Pre-Prelast | Pre-Prelast errors | true | yes |
|
||||
| **Bypass Values (dynamic)** | | | | | |
|
||||
| **Bypass Values** | | | | | |
|
||||
| bypass#bypassFactor | Number | Bypass Factor | Bypass factor value | true | yes |
|
||||
| bypass#bypassLevel | Number | Bypass Level | Bypass level state | true | yes |
|
||||
| bypass#bypassCorrection | Number | Bypass Correction | Bypass correction state | true | yes |
|
||||
| bypass#bypassSummer | Switch | Bypass Summer Mode | Bypass summer mode | true | yes |
|
||||
| **Preheater Values (dynamic)** | | | | | |
|
||||
| **Preheater Values** | | | | | |
|
||||
| preheater#preheaterValve | Number | Preheater Valve | State of the preheater valve | true | yes |
|
||||
| preheater#preheaterFrostProtect | Switch | Frost Protection | State of the frost protection | true | yes |
|
||||
| preheater#preheaterHeating | Switch | Preheater | State of the preheater | true | yes |
|
||||
| preheater#preheaterFrostTime | Number | Preheater Frost Time | Frost minutes | true | yes |
|
||||
| preheater#preheaterSafety | Number | Preheater Frost Safety | Frost safety setting | true | yes |
|
||||
| **EWT Values (dynamic)** | | | | | |
|
||||
| ewt#ewtTemperatureLow | Number:Temperature | EWT Temperature (low) | Lower temperature of the geothermal heat exchanger | true | yes |
|
||||
| ewt#ewtTemperatureHigh | Number:Temperature | EWT Temperature (high) | Upper temperature of the geothermal heat exchanger | true | yes |
|
||||
| ewt#ewtSpeed | Number | EWT Speed Up (%) | Speed up of the geothermal heat exchanger | true | yes |
|
||||
| **Heater Values (dynamic)** | | | | | |
|
||||
| **GHX Values** | | | | | |
|
||||
| ewt#ewtTemperatureLow | Number:Temperature | GHX Temperature (low) | Lower temperature of the geothermal heat exchanger | true | yes |
|
||||
| ewt#ewtTemperatureHigh | Number:Temperature | GHX Temperature (high) | Upper temperature of the geothermal heat exchanger | true | yes |
|
||||
| ewt#ewtSpeed | Number | GHX Speed Up (%) | Speed up of the geothermal heat exchanger | true | yes |
|
||||
| **Heater Values** | | | | | |
|
||||
| heater#heaterPower | Number | Heater Power | Heater power value | true | yes |
|
||||
| heater#heaterPowerI | Number | Heater Power I-parameter | Heater power I-parameter value | true | yes |
|
||||
| heater#heaterTargetTemperature | Number:Temperature | Heater Target Temperature | Target temperature of the heater | true | yes |
|
||||
| **Cookerhood Values (dynamic)** | | | | | |
|
||||
| **Cookerhood Values** | | | | | |
|
||||
| cookerhood#cookerhoodSpeed | Number | Cookerhood Speed Up (%) | Speed up of the cookerhood | true | yes |
|
||||
| **Enthalpy Values (dynamic)** | | | | | |
|
||||
| **Enthalpy Values** | | | | | |
|
||||
| enthalpy#enthalpyTemperature | Number:Temperature | Enthalpy Sensor Temperature | Temperature of the enthalpy sensor | true | yes |
|
||||
| enthalpy#enthalpyHumidity | Number | Enthalpy Sensor Humidity | Humidity of the enthalpy sensor | true | yes |
|
||||
| enthalpy#enthalpyLevel | Number | Enthalpy Sensor Level | Level of the enthalpy sensor | true | yes |
|
||||
| enthalpy#enthalpyTime | Number | Enthalpy Sensor Timer | Timer state of the enthalpy sensor | true | yes |
|
||||
| **Option Settings** | | | | | |
|
||||
| options#isPreheater | Switch | Preheater | Preheater option installed | true | yes |
|
||||
| options#isBypass | Switch | Bypass | Bypass option installed | true | yes |
|
||||
| options#recuType | Number | ComfoAir Type | Type of the ComfoAir (1 = left / 2 = right) | true | yes |
|
||||
| options#recuSize | Number | ComfoAir Size | Size of the ComfoAir (1 = big / 2 = small) | true | yes |
|
||||
| options#isChimney | Switch | Chimney | Chimney option installed | true | yes |
|
||||
| options#isCookerhood | Switch | Cookerhood | Cookerhood option installed | true | yes |
|
||||
| options#isHeater | Switch | Heater | Heater option installed | true | yes |
|
||||
| options#isEnthalpy | Number | Enthalpy | Enthalpy option installed | true | yes |
|
||||
| options#isEWT | Number | Geothermal Heat Exchanger | Geothermal heat exchanger option installed | true | yes |
|
||||
| options#analogPriority | Number | Analog Priority | Priority of analog inputs for highest fan level | true | yes |
|
||||
| **Inputs** | | | | | |
|
||||
| inputs#isL1Switch | Switch | L1 Switch | Availability of L1 step switch | true | yes |
|
||||
| inputs#isL2Switch | Switch | L2 Switch | Availability of L2 step switch | true | yes |
|
||||
@@ -214,7 +223,7 @@ Number comfoairOutgoingFan "Exhaust capacity [%d %%]" <fan_out> (ComfoAir)
|
||||
Number comfoairFanIn0 "Supply capacity - level 0 [%d %%]" <fan_in> (ComfoAir) {channel="comfoair:comfoair:myComfoAir:ventilation#fanIn0"}
|
||||
Number comfoairFanOut0 "Exhaust capacity - level 0 [%d %%]" <fan_out> (ComfoAir) {channel="comfoair:comfoair:myComfoAir:ventilation#fanOut0"}
|
||||
Switch comfoairBypassMode "Bypass [MAP(comfoair_bypass.map):%s]" <climate> (ComfoAir) {channel="comfoair:comfoair:myComfoAir:menuP9#bypassState"}
|
||||
Switch comfoairEWTMode "EWT [MAP(comfoair_on-off.map):%s]" <climate> (ComfoAir) {channel="comfoair:comfoair:myComfoAir:menuP9#ewtState"}
|
||||
Switch comfoairGHXMode "GHX [MAP(comfoair_on-off.map):%s]" <climate> (ComfoAir) {channel="comfoair:comfoair:myComfoAir:menuP9#ewtState"}
|
||||
Switch comfoairChimneyMode "Fire programme [MAP(comfoair_on-off.map):%s]" <climate> (ComfoAir) {channel="comfoair:comfoair:myComfoAir:menuP9#chimneyState"}
|
||||
Switch comfoairHeaterMode "Heater [MAP(comfoair_on-off.map):%s]" <climate> (ComfoAir) {channel="comfoair:comfoair:myComfoAir:menuP9#heaterState"}
|
||||
Switch comfoairCookerHoodMode "Extractor hood [MAP(comfoair_on-off.map):%s]" <climate> (ComfoAir) {channel="comfoair:comfoair:myComfoAir:menuP9#cookerhoodState"}
|
||||
@@ -246,7 +255,7 @@ sitemap comfoair label="ComfoAir" {
|
||||
Text item=comfoairIncomingFan valuecolor=["black"]
|
||||
Text item=comfoairBypassMode valuecolor=["black"]
|
||||
Text item=comfoairOutgoingFan valuecolor=["black"]
|
||||
Text item=comfoairEWTMode valuecolor=[OFF="silver", ON="black"]
|
||||
Text item=comfoairGHXMode valuecolor=[OFF="silver", ON="black"]
|
||||
Text item=comfoairEfficiency valuecolor=["black"]
|
||||
Text item=comfoairFreezeMode valuecolor=[OFF="black", ON="red"]
|
||||
Text item=comfoairFilterRuntime_Message valuecolor=["black"]
|
||||
|
||||
Reference in New Issue
Block a user