public/openhab-addons
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[Konnected] Taking configured onValue into account when sending status to actuator (#13360)

Browse Source 
* Taking configured onvalue into account when sending status to actuator
* Added documentation for onValue configuration

Signed-off-by: Haavar Valeur <haavar@haavar.com>
This commit is contained in:
Haavar Valeur
2022-09-09 23:48:03 -07:00
committed by GitHub
parent ce6b0a876d
commit 9c534e37a8
2 changed files with 13 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
bundles/org.openhab.binding.konnected/README.md
View File

@@ -48,6 +48,11 @@ You will need to add channels for the zones that you have connected and configur
You will need to configure each channel with the appropriate zone number corresponding to the zone on The Konnected Alarm Panel.
Then you need to link the corresponding item to the channel.
Switches and actuators can be configured as high or low level triggered.
This is done though setting the parameter onValue to 1 for high level trigger or 0 for low level trigger.
The default setting is high level triggered (1).
It may for example be useful to set channel to low level trigger when using a low level trigger relay board, to avoid inverting the switch logic.
For the actuator type channels you can also add configuration parameters times, pause and momentary which will be added to the payload that is sent to the Konnected Alarm Panel.
These parameters will tell the module to pulse the actuator for certain time period.
A momentary switch actuates a switch for a specified time (in milliseconds) and then reverts it back to the off state.