[enocean] Add support for EEP in group A5_09 (#13793)

* [enocean] Support for gas sensors from A5_09 group

Implementing support for gas sensors with EEP A5_09_02, 04, 05, 08, 09,
0C, 0D, adding new changels - CO, CO2, VOC, VOCId, TVOC and regenerate
I18N properties file

Fixes #13785, #13472

Signed-off-by: Zhivka Dimova <zhivka.dimova@myforest.net>

bundles/org.openhab.binding.enocean/README.md

@@ -48,6 +48,7 @@ This binding is developed on and tested with the following devices
   - TF-FKB (window contact)
   - TF-AHDSB (outdoor brightness sensor)
   - FAFT60 (outdoor temperature & humidity sensor)
+  - FLGTF55 (air quality & temperature & humidity sensor)
 - The following Opus actuators:
   - GN-A-R12V-SR-4 (light)
   - GN-A-R12V-MF-2 (light)
@@ -70,28 +71,30 @@ This binding is developed on and tested with the following devices
 - Rocker switches (NodOn, Eltako FT55 etc)
 - Siegenia Senso Secure window sensors
 - Soda window handles
+- Nexelec INSAFE+ Carbon
 
 However, because of the standardized EnOcean protocol it is more important which EEP this binding supports.
 Hence if your device supports one of the following EEPs the chances are good that your device is also supported by this binding.
 
 |Thing type                       | EEP family        | EEP Types               | Channels¹                                                   |  Devices²               | Pairing   |
-|---------------------------------|-------------|---------------|------------------------------|--------------------------------|-----------|
+|---------------------------------|-------------------|-------------------------|-------------------------------------------------------------|-------------------------|-----------|
 | bridge                          | -                 | -                       | repeaterMode, setBaseId                                     | USB300, EnOceanPi       | -         |
-| pushButton                      | F6-01/D2-03 | 0x01/0x0A     | pushButton, doublePress,<br/>longPress, batteryLevel | NodOn soft button | Manually/Discovery  |
+| pushButton                      | F6-01/D2-03       | 0x01/0x0A               | pushButton, doublePress, longPress, batteryLevel            | NodOn soft button       | Manually/Discovery  |
-| rockerSwitch                    | F6-02       | 0x01-02       | rockerswitchA, rockerswitchB,<br/>rockerSwitchAction | Eltako FT55                    | Discovery |
+| rockerSwitch                    | F6-02             | 0x01-02                 | rockerswitchA, rockerswitchB, rockerSwitchAction            | Eltako FT55             | Discovery |
 | mechanicalHandle                | F6-10/D2-06       | 0x00-01/0x01            | windowHandleState, contact and a lot more for soda handles³ | Hoppe SecuSignal handles, Eltako TF-FGB, Soda handles | Discovery |
 | contact                         | D5-00             | 0x01                    | contact                                                     | Eltako FTK(E) & TF-FKB  | Discovery |
 | temperatureSensor               | A5-02             | 0x01-30                 | temperature                                                 | Thermokon SR65          | Discovery |
 | temperatureHumiditySensor       | A5-04             | 0x01-03                 | humidity, temperature                                       | Eltako FTSB             | Discovery |
-| occupancySensor                 | A5-07       | 0x01-03       | illumination, batteryVoltage,<br/>motionDetection | NodON PIR-2-1-01 | Discovery |
+| gasSensor                       | A5-09             | 0x02,04,05, 08,09,0C,0D | co, co2, totalVolatileOrganicCompounds, volatileOrganicCompounds, volatileOrganicCompoundsId, humidity, temperature | Nexelec, Eltako FLGTF55 | Discovery |
-| lightTemperatureOccupancySensor | A5-08       | 0x01-03       | illumination, temperature,<br/>occupancy, motionDetection | Eltako FABH | Discovery |
+| occupancySensor                 | A5-07             | 0x01-03                 | illumination, batteryVoltage, motionDetection               | NodON PIR-2-1-01        | Discovery |
+| lightTemperatureOccupancySensor | A5-08             | 0x01-03                 | illumination, temperature, occupancy, motionDetection       | Eltako FABH             | Discovery |
 | lightSensor                     | A5-06             | 0x01                    | illumination                                                | Eltako TF-AHDSB         | Discovery |
-| roomOperatingPanel              | A5-10       | 0x01-23       | temperature, setPoint, fanSpeedStage,<br/>occupancy           | Thermokon SR04 | Discovery |
+| roomOperatingPanel              | A5-10             | 0x01-23                 | temperature, setPoint, fanSpeedStage, occupancy             | Thermokon SR04          | Discovery |
-| automatedMeterSensor            | A5-12       | 0x00-03       | counter, currentNumber, instantpower,<br/>totalusage, amrLitre, amrCubicMetre | FWZ12 | Discovery |
+| automatedMeterSensor            | A5-12             | 0x00-03                 | counter, currentNumber, instantpower, totalusage, amrLitre, amrCubicMetre | FWZ12     | Discovery |
-| environmentalSensor             | A5-13       | 0x01-02       | temperature, windspeed, illumination,<br/>rainStatus | FWS61 | Discovery |
+| environmentalSensor             | A5-13             | 0x01-02                 | temperature, windspeed, illumination, rainStatus            | FWS61                   | Discovery |
 | centralCommand                  | A5-38             | 0x08                    | dimmer, generalSwitch                                       | Eltako FUD14, FSR14     | Teach-in  |
 | rollershutter                   | A5-3F/D2-05/A5-38 | 0x7F/00/08              | rollershutter                                               | Eltako FSB14, NodOn SIN-2-RS-01| Teach-in/Discovery |
-| measurementSwitch               | D2-01       | 0x00-0F,11,12 | generalSwitch(/A/B), instantpower,<br/>totalusage, repeaterMode | NodOn In Wall Switch | Discovery |
+| measurementSwitch               | D2-01             | 0x00-0F,11,12           | generalSwitch(/A/B), instantpower, totalusage, repeaterMode | NodOn In Wall Switch    | Discovery |
 | windowSashHandleSensor          | D2-06             | 0x50                    | windowHandleState, windowSashState, batteryLevel, batteryLow, windowBreachEvent, windowCalibrationState, windowCalibrationStep | Siegenia Senso Secure | Discovery |
 | multiFunctionSmokeDetector      | D2-14/F6-05       | 0x30/02                 | smokeDetection, batteryLow                                  | Insafe+, Afriso ASD     | Discovery |
 | heatRecoveryVentilation         | D2-50             | 0x00,01,10,11           | a lot of different state channels                           | Dimplex DL WE2          | Discovery |
@@ -202,6 +205,9 @@ If you change the SenderId of your thing, you have to pair again the thing with
 | temperatureHumiditySensor       | receivingEEPId    |                             | A5_04_01-03 |
 |                                 | enoceanId         | | |
 |                                 | receivingSIGEEP   | | |
+| gasSensor                       | receivingEEPId    |                             | A5_09_02, A5_09_04, A5_09_05, A5_09_08, A5_09_09, A5_09_0C, A5_09_0D |
+|                                 | enoceanId         | | |
+|                                 | receivingSIGEEP   | | |
 | occupancySensor                 | receivingEEPId    |                             | A5_07_01-03 |
 |                                 | enoceanId         | | |
 |                                 | receivingSIGEEP   | | |
@@ -261,7 +267,7 @@ If you want to receive messages of your EnOcean devices you have to set **the en
 The channels of a thing are determined automatically based on the chosen EEP.
 
 |Channel                            | Item                      | Description |
-|---------------------|--------------------|---------------------------------|
+|-----------------------------------|---------------------------|---------------------------------|
 | repeaterMode                      | String                    | Set repeater level to 1, 2 or disable |
 | setBaseId                         | String                    | Changes the BaseId of your gateway. This can only be done 10 times! So use it with care. |
 | pushButton                        | Trigger                   | Channel type system:rawbutton, emits PRESSED and RELEASED events |
@@ -277,6 +283,11 @@ The channels of a thing are determined automatically based on the chosen EEP.
 | contact                           | Contact                   | State OPEN/CLOSED (tilted handle => OPEN) |
 | temperature                       | Number:Temperature        | Temperature in degree Celsius |
 | humidity                          | Number                    | Relative humidity level in percentages |
+| co                                | Number:Dimensionless      | Carbonmonoxide level in ppm |
+| co2                               | Number:Dimensionless      | Carbondioxide level in ppm |
+| totalVolatileOrganicCompounds     | Number:Dimensionless      | Total volatile organic compounds in ppb |
+| volatileOrganicCompounds          | Number:Dimensionless      | VOC level |
+| volatileOrganicCompoundsId        | String                    | VOC Identification |
 | illumination                      | Number:Illuminance        | Illumination in lux |
 | illuminationWest                  | Number:Illuminance        | Illumination in lux |
 | illuminationSouthNorth            | Number:Illuminance        | Illumination in lux |

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/EnOceanBindingConstants.java

@@ -61,6 +61,7 @@ public class EnOceanBindingConstants {
     public static final ThingTypeUID THING_TYPE_TEMPERATURESENSOR = new ThingTypeUID(BINDING_ID, "temperatureSensor");
     public static final ThingTypeUID THING_TYPE_TEMPERATUREHUMIDITYSENSOR = new ThingTypeUID(BINDING_ID,
             "temperatureHumiditySensor");
+    public static final ThingTypeUID THING_TYPE_GASSENSOR = new ThingTypeUID(BINDING_ID, "gasSensor");
     public static final ThingTypeUID THING_TYPE_AUTOMATEDMETERSENSOR = new ThingTypeUID(BINDING_ID,
             "automatedMeterSensor");
     public static final ThingTypeUID THING_TYPE_THERMOSTAT = new ThingTypeUID(BINDING_ID, "thermostat");
@@ -83,10 +84,10 @@ public class EnOceanBindingConstants {
     public static final Set<ThingTypeUID> SUPPORTED_DEVICE_THING_TYPES_UIDS = Set.of(THING_TYPE_PUSHBUTTON,
             THING_TYPE_ROCKERSWITCH, THING_TYPE_CLASSICDEVICE, THING_TYPE_CENTRALCOMMAND, THING_TYPE_ROOMOPERATINGPANEL,
             THING_TYPE_MECHANICALHANDLE, THING_TYPE_CONTACT, THING_TYPE_MEASUREMENTSWITCH, THING_TYPE_TEMPERATURESENSOR,
-            THING_TYPE_TEMPERATUREHUMIDITYSENSOR, THING_TYPE_GENERICTHING, THING_TYPE_ROLLERSHUTTER,
+            THING_TYPE_TEMPERATUREHUMIDITYSENSOR, THING_TYPE_GASSENSOR, THING_TYPE_GENERICTHING,
-            THING_TYPE_OCCUPANCYSENSOR, THING_TYPE_LIGHTTEMPERATUREOCCUPANCYSENSOR, THING_TYPE_LIGHTSENSOR,
+            THING_TYPE_ROLLERSHUTTER, THING_TYPE_OCCUPANCYSENSOR, THING_TYPE_LIGHTTEMPERATUREOCCUPANCYSENSOR,
-            THING_TYPE_ENVIRONMENTALSENSOR, THING_TYPE_AUTOMATEDMETERSENSOR, THING_TYPE_THERMOSTAT,
+            THING_TYPE_LIGHTSENSOR, THING_TYPE_ENVIRONMENTALSENSOR, THING_TYPE_AUTOMATEDMETERSENSOR,
-            THING_TYPE_MULTFUNCTIONSMOKEDETECTOR, THING_TYPE_HEATRECOVERYVENTILATION,
+            THING_TYPE_THERMOSTAT, THING_TYPE_MULTFUNCTIONSMOKEDETECTOR, THING_TYPE_HEATRECOVERYVENTILATION,
             THING_TYPE_WINDOWSASHHANDLESENSOR);
 
     // List of all Channel Type Ids, these type ids are also used as channel ids during dynamic creation of channels
@@ -103,6 +104,11 @@ public class EnOceanBindingConstants {
     public static final String CHANNEL_ANGLE = "angle";
     public static final String CHANNEL_TEMPERATURE = "temperature";
     public static final String CHANNEL_HUMIDITY = "humidity";
+    public static final String CHANNEL_CO2 = "co2";
+    public static final String CHANNEL_CO = "co";
+    public static final String CHANNEL_TVOC = "totalVolatileOrganicCompounds";
+    public static final String CHANNEL_VOC = "volatileOrganicCompounds";
+    public static final String CHANNEL_VOC_ID = "volatileOrganicCompoundsId";
     public static final String CHANNEL_SETPOINT = "setPoint";
     public static final String CHANNEL_FANSPEEDSTAGE = "fanSpeedStage";
     public static final String CHANNEL_OCCUPANCY = "occupancy";
@@ -243,6 +249,18 @@ public class EnOceanBindingConstants {
             Map.entry(CHANNEL_HUMIDITY,
                     new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_HUMIDITY),
                             CoreItemFactory.NUMBER)),
+            Map.entry(CHANNEL_CO2,
+                    new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_CO2), CoreItemFactory.NUMBER)),
+            Map.entry(CHANNEL_CO,
+                    new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_CO), CoreItemFactory.NUMBER)),
+            Map.entry(CHANNEL_VOC,
+                    new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_VOC), CoreItemFactory.NUMBER)),
+            Map.entry(CHANNEL_VOC_ID,
+                    new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_VOC_ID),
+                            CoreItemFactory.STRING)),
+            Map.entry(CHANNEL_TVOC,
+                    new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_TVOC),
+                            CoreItemFactory.NUMBER)),
             Map.entry(CHANNEL_FANSPEEDSTAGE,
                     new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_FANSPEEDSTAGE),
                             CoreItemFactory.STRING)),

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/eep/A5_09/A5_09.java

@@ -0,0 +1,170 @@
+/**
+ * Copyright (c) 2010-2023 Contributors to the openHAB project
+ *
+ * See the NOTICE file(s) distributed with this work for additional
+ * information.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * http://www.eclipse.org/legal/epl-2.0
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ */
+package org.openhab.binding.enocean.internal.eep.A5_09;
+
+import static org.openhab.binding.enocean.internal.EnOceanBindingConstants.*;
+
+import java.util.function.Function;
+
+import org.eclipse.jdt.annotation.NonNullByDefault;
+import org.openhab.binding.enocean.internal.eep.Base._4BSMessage;
+import org.openhab.binding.enocean.internal.eep.EEPHelper;
+import org.openhab.binding.enocean.internal.messages.ERP1Message;
+import org.openhab.core.config.core.Configuration;
+import org.openhab.core.library.types.DecimalType;
+import org.openhab.core.library.unit.SIUnits;
+import org.openhab.core.library.unit.Units;
+import org.openhab.core.types.State;
+import org.openhab.core.types.UnDefType;
+
+/**
+ *
+ * @author Zhivka Dimova - Initial contribution
+ */
+@NonNullByDefault
+public abstract class A5_09 extends _4BSMessage {
+
+    public A5_09(ERP1Message packet) {
+        super(packet);
+    }
+
+    // CO
+    protected double getUnscaledCOMin() {
+        return 0;
+    }
+
+    protected double getUnscaledCOMax() {
+        return 255;
+    }
+
+    protected double getScaledCOMin() {
+        return 0;
+    }
+
+    protected double getScaledCOMax() {
+        return 1020;
+    }
+
+    protected int getUnscaledCOValue() {
+        return getDB2Value();
+    }
+
+    // CO2
+    protected double getUnscaledCO2Min() {
+        return 0;
+    }
+
+    protected double getUnscaledCO2Max() {
+        return 255;
+    }
+
+    protected double getScaledCO2Min() {
+        return 0;
+    }
+
+    protected double getScaledCO2Max() {
+        return 2550;
+    }
+
+    protected int getUnscaledCO2Value() {
+        return getDB2Value();
+    }
+
+    // Temperature
+    protected double getUnscaledTemperatureMin() {
+        return 0;
+    }
+
+    protected double getUnscaledTemperatureMax() {
+        return 255;
+    }
+
+    protected double getScaledTemperatureMin() {
+        return 0;
+    }
+
+    protected double getScaledTemperatureMax() {
+        return 51;
+    }
+
+    protected int getUnscaledTemperatureValue() {
+        return getDB1Value();
+    }
+
+    // Humidity
+    protected double getUnscaledHumidityMin() {
+        return 0;
+    }
+
+    protected double getUnscaledHumidityMax() {
+        return 200;
+    }
+
+    protected double getScaledHumidityMin() {
+        return 0;
+    }
+
+    protected double getScaledHumidityMax() {
+        return 100;
+    }
+
+    protected int getUnscaledHumidityValue() {
+        return getDB3Value();
+    }
+
+    // Battery
+    protected double getUnscaledBatteryVoltageMin() {
+        return 0;
+    }
+
+    protected double getUnscaledBatteryVoltageMax() {
+        return 255;
+    }
+
+    protected double getScaledBatteryVoltageMin() {
+        return 0;
+    }
+
+    protected double getScaledBatteryVoltageMax() {
+        return 5.1;
+    }
+
+    private int getUnscaledBatteryVoltageValue() {
+        return getDB3Value();
+    }
+
+    @Override
+    protected State convertToStateImpl(String channelId, String channelTypeId,
+            Function<String, State> getCurrentStateFunc, Configuration config) {
+
+        if (CHANNEL_CO.equals(channelId)) {
+            return EEPHelper.calculateState(getUnscaledCOValue(), getScaledCOMin(), getScaledCOMax(),
+                    getUnscaledCOMin(), getUnscaledCOMax(), Units.PARTS_PER_MILLION);
+        } else if (CHANNEL_CO2.equals(channelId)) {
+            return EEPHelper.calculateState(getUnscaledCO2Value(), getScaledCO2Min(), getScaledCO2Max(),
+                    getUnscaledCO2Min(), getUnscaledCO2Max(), Units.PARTS_PER_MILLION);
+        } else if (CHANNEL_TEMPERATURE.equals(channelId)) {
+            return EEPHelper.calculateState(getUnscaledTemperatureValue(), getScaledTemperatureMin(),
+                    getScaledTemperatureMax(), getUnscaledTemperatureMin(), getUnscaledTemperatureMax(),
+                    SIUnits.CELSIUS);
+        } else if (CHANNEL_HUMIDITY.equals(channelId)) {
+            return new DecimalType((getUnscaledHumidityValue() * 100.0) / getUnscaledHumidityMax());
+        } else if (CHANNEL_BATTERY_VOLTAGE.equals(channelId)) {
+            return EEPHelper.calculateState(getUnscaledBatteryVoltageValue(), getScaledBatteryVoltageMin(),
+                    getScaledBatteryVoltageMax(), getUnscaledBatteryVoltageMin(), getUnscaledBatteryVoltageMax(),
+                    Units.VOLT);
+        }
+
+        return UnDefType.UNDEF;
+    }
+}

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/eep/A5_09/A5_09_02.java

@@ -0,0 +1,28 @@
+/**
+ * Copyright (c) 2010-2023 Contributors to the openHAB project
+ *
+ * See the NOTICE file(s) distributed with this work for additional
+ * information.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * http://www.eclipse.org/legal/epl-2.0
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ */
+package org.openhab.binding.enocean.internal.eep.A5_09;
+
+import org.eclipse.jdt.annotation.NonNullByDefault;
+import org.openhab.binding.enocean.internal.messages.ERP1Message;
+
+/**
+ *
+ * @author Zhivka Dimova - Initial contribution
+ */
+@NonNullByDefault
+public class A5_09_02 extends A5_09 {
+
+    public A5_09_02(ERP1Message packet) {
+        super(packet);
+    }
+}

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/eep/A5_09/A5_09_04.java

@@ -0,0 +1,33 @@
+/**
+ * Copyright (c) 2010-2023 Contributors to the openHAB project
+ *
+ * See the NOTICE file(s) distributed with this work for additional
+ * information.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * http://www.eclipse.org/legal/epl-2.0
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ */
+package org.openhab.binding.enocean.internal.eep.A5_09;
+
+import org.eclipse.jdt.annotation.NonNullByDefault;
+import org.openhab.binding.enocean.internal.messages.ERP1Message;
+
+/**
+ *
+ * @author Zhivka Dimova - Initial contribution
+ */
+@NonNullByDefault
+public class A5_09_04 extends A5_09 {
+
+    public A5_09_04(ERP1Message packet) {
+        super(packet);
+    }
+
+    @Override
+    protected double getScaledCO2Max() {
+        return 2550;
+    }
+}

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/eep/A5_09/A5_09_05.java

@@ -0,0 +1,89 @@
+/**
+ * Copyright (c) 2010-2023 Contributors to the openHAB project
+ *
+ * See the NOTICE file(s) distributed with this work for additional
+ * information.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * http://www.eclipse.org/legal/epl-2.0
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ */
+package org.openhab.binding.enocean.internal.eep.A5_09;
+
+import static org.openhab.binding.enocean.internal.EnOceanBindingConstants.*;
+
+import java.util.function.Function;
+
+import org.eclipse.jdt.annotation.NonNullByDefault;
+import org.openhab.binding.enocean.internal.messages.ERP1Message;
+import org.openhab.core.config.core.Configuration;
+import org.openhab.core.library.types.QuantityType;
+import org.openhab.core.library.types.StringType;
+import org.openhab.core.library.unit.Units;
+import org.openhab.core.types.State;
+import org.openhab.core.types.UnDefType;
+
+/**
+ *
+ * @author Zhivka Dimova - Initial contribution
+ */
+@NonNullByDefault
+public class A5_09_05 extends A5_09 {
+
+    public A5_09_05(ERP1Message packet) {
+        super(packet);
+    }
+
+    protected double[] ScaleMultiplier = new double[] { 0.01, 0.1, 1, 10 };
+
+    protected String[] getVOCIdentifications() {
+        return new String[] { "VOCT", "Formaldehyde", "Benzene", "Styrene", "Toluene", "Tetrachloroethylene", "Xylene",
+                "n-Hexane", "n-Octane", "Cyclopentane", "Methanol", "Ethanol", "1-Pentanol", "Acetone",
+                "ethylene Oxide", "Acetaldehyde ue", "Acetic Acid", "Propionine Acid", "Valeric Acid", "Butyric Acid",
+                "Ammoniac", "Hidrogen Sulfide", "Dimethylsulfide", "2-Butanol", "2-Methylpropanol", "Diethyl ether",
+                "VOC-Index", "Ozone" };
+    }
+
+    protected long getUnscaledVOCValue() {
+        return getDBByOffsetSizeValue(0, 16);
+    }
+
+    protected double getScalingFactor() {
+        int smid = Long.valueOf(getDBByOffsetSizeValue(30, 2)).intValue();
+        if (smid < 0 || smid >= ScaleMultiplier.length) {
+            logger.debug("Invalid value according to enocean specification for A5_09 Scale Multiplier {}", smid);
+            return 1;
+        }
+
+        return ScaleMultiplier[smid];
+    }
+
+    protected String getVOCID() {
+        int vocId = getDB1Value();
+        String[] VOCIdentifications = getVOCIdentifications();
+        if (vocId == 255) {
+            return VOCIdentifications[VOCIdentifications.length - 1];
+        } else if (vocId < 0 || vocId >= VOCIdentifications.length - 1) {
+            logger.debug("Invalid value according to enocean specification for A5_09 VOC Identification {}", vocId);
+            return "";
+        }
+
+        return VOCIdentifications[vocId];
+    }
+
+    @Override
+    protected State convertToStateImpl(String channelId, String channelTypeId,
+            Function<String, State> getCurrentStateFunc, Configuration config) {
+
+        if (CHANNEL_VOC.equals(channelId)) {
+            double scaledVOC = getUnscaledVOCValue() * getScalingFactor();
+            return new QuantityType<>(scaledVOC, Units.PARTS_PER_BILLION);
+        } else if (CHANNEL_VOC_ID.equals(channelId)) {
+            return new StringType(getVOCID());
+        }
+
+        return UnDefType.UNDEF;
+    }
+}

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/eep/A5_09/A5_09_08.java

@@ -0,0 +1,38 @@
+/**
+ * Copyright (c) 2010-2023 Contributors to the openHAB project
+ *
+ * See the NOTICE file(s) distributed with this work for additional
+ * information.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * http://www.eclipse.org/legal/epl-2.0
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ */
+package org.openhab.binding.enocean.internal.eep.A5_09;
+
+import org.eclipse.jdt.annotation.NonNullByDefault;
+import org.openhab.binding.enocean.internal.messages.ERP1Message;
+
+/**
+ *
+ * @author Zhivka Dimova - Initial contribution
+ */
+@NonNullByDefault
+public class A5_09_08 extends A5_09 {
+
+    public A5_09_08(ERP1Message packet) {
+        super(packet);
+    }
+
+    @Override
+    protected double getScaledCO2Max() {
+        return 2000;
+    }
+
+    @Override
+    protected int getUnscaledCO2Value() {
+        return getDB1Value();
+    }
+}

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/eep/A5_09/A5_09_09.java

@@ -0,0 +1,38 @@
+/**
+ * Copyright (c) 2010-2023 Contributors to the openHAB project
+ *
+ * See the NOTICE file(s) distributed with this work for additional
+ * information.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * http://www.eclipse.org/legal/epl-2.0
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ */
+package org.openhab.binding.enocean.internal.eep.A5_09;
+
+import org.eclipse.jdt.annotation.NonNullByDefault;
+import org.openhab.binding.enocean.internal.messages.ERP1Message;
+
+/**
+ *
+ * @author Zhivka Dimova - Initial contribution
+ */
+@NonNullByDefault
+public class A5_09_09 extends A5_09 {
+
+    public A5_09_09(ERP1Message packet) {
+        super(packet);
+    }
+
+    @Override
+    protected double getScaledCO2Max() {
+        return 2000;
+    }
+
+    @Override
+    protected int getUnscaledCO2Value() {
+        return getDB1Value();
+    }
+}

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/eep/A5_09/A5_09_0C.java

@@ -0,0 +1,65 @@
+/**
+ * Copyright (c) 2010-2023 Contributors to the openHAB project
+ *
+ * See the NOTICE file(s) distributed with this work for additional
+ * information.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * http://www.eclipse.org/legal/epl-2.0
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ */
+package org.openhab.binding.enocean.internal.eep.A5_09;
+
+import static org.openhab.binding.enocean.internal.EnOceanBindingConstants.*;
+
+import java.util.function.Function;
+
+import org.eclipse.jdt.annotation.NonNullByDefault;
+import org.openhab.binding.enocean.internal.messages.ERP1Message;
+import org.openhab.core.config.core.Configuration;
+import org.openhab.core.library.types.QuantityType;
+import org.openhab.core.library.unit.Units;
+import org.openhab.core.types.State;
+
+/**
+ *
+ * @author Zhivka Dimova - Initial contribution
+ */
+@NonNullByDefault
+public class A5_09_0C extends A5_09_05 {
+
+    public A5_09_0C(ERP1Message packet) {
+        super(packet);
+    }
+
+    @Override
+    protected String[] getVOCIdentifications() {
+        String[] VOCIdsSuper = super.getVOCIdentifications();
+        int elFromSuper = VOCIdsSuper.length - 2;
+        String[] VOCIdsExtension = new String[] { "Naphthalene", "4-Phenylcyclohexene", "Limonene", "Trichloroethylene",
+                "Isovaleric acid", "Indole", "Cadaverine", "Putrescine", "Caproic acid", "Ozone" };
+        String[] VOCIdsExtended = new String[elFromSuper + VOCIdsExtension.length];
+
+        System.arraycopy(VOCIdsSuper, 0, VOCIdsExtended, 0, elFromSuper);
+        System.arraycopy(VOCIdsExtension, 0, VOCIdsExtended, elFromSuper, VOCIdsExtension.length);
+
+        return VOCIdsExtended;
+    }
+
+    @Override
+    protected State convertToStateImpl(String channelId, String channelTypeId,
+            Function<String, State> getCurrentStateFunc, Configuration config) {
+
+        if (CHANNEL_VOC.equals(channelId)) {
+            double scaledVOC = getUnscaledVOCValue() * getScalingFactor();
+            if (getBit(getDB0(), 2)) {
+                return new QuantityType<>(scaledVOC, Units.MICROGRAM_PER_CUBICMETRE);
+            }
+            return new QuantityType<>(scaledVOC, Units.PARTS_PER_BILLION);
+        }
+
+        return super.convertToStateImpl(channelId, channelTypeId, getCurrentStateFunc, config);
+    }
+}

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/eep/A5_09/A5_09_0D.java

@@ -0,0 +1,52 @@
+/**
+ * Copyright (c) 2010-2023 Contributors to the openHAB project
+ *
+ * See the NOTICE file(s) distributed with this work for additional
+ * information.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * http://www.eclipse.org/legal/epl-2.0
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ */
+package org.openhab.binding.enocean.internal.eep.A5_09;
+
+import static org.openhab.binding.enocean.internal.EnOceanBindingConstants.*;
+
+import java.util.function.Function;
+
+import org.eclipse.jdt.annotation.NonNullByDefault;
+import org.openhab.binding.enocean.internal.eep.EEPHelper;
+import org.openhab.binding.enocean.internal.messages.ERP1Message;
+import org.openhab.core.config.core.Configuration;
+import org.openhab.core.library.unit.Units;
+import org.openhab.core.types.State;
+
+/**
+ *
+ * @author Zhivka Dimova - Initial contribution
+ */
+@NonNullByDefault
+public class A5_09_0D extends A5_09 {
+
+    public A5_09_0D(ERP1Message packet) {
+        super(packet);
+    }
+
+    @Override
+    protected double getUnscaledTemperatureMax() {
+        return 250;
+    }
+
+    @Override
+    protected State convertToStateImpl(String channelId, String channelTypeId,
+            Function<String, State> getCurrentStateFunc, Configuration config) {
+
+        if (CHANNEL_TVOC.equals(channelId)) {
+            return EEPHelper.calculateState(getDB2Value(), 0, 100, 0, 200, Units.PERCENT);
+        }
+
+        return super.convertToStateImpl(channelId, channelTypeId, getCurrentStateFunc, config);
+    }
+}

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/eep/Base/_4BSMessage.java

@@ -45,6 +45,22 @@ public abstract class _4BSMessage extends EEP {
     public static final byte TEACHIN_BIT = 0x08;
     public static final byte LRN_TYPE_MASK = (byte) 0x80;
 
+    public long getDBByOffsetSizeValue(int offset, int size) {
+        if ((offset < 0 || offset > 31) || (size < 1 || size > 32 - offset)) {
+            logger.warn("4BSMessage get DB value by offset: {} and size: {}", offset, size);
+            return 0;
+        }
+
+        long msg = (((long) bytes[0] & 0xFF) << 24) | (((long) bytes[1] & 0xFF) << 16) | (((long) bytes[2] & 0xFF) << 8)
+                | bytes[3];
+        msg = (msg >> (32 - offset - size)) & ((1 << size) - 1);
+
+        logger.debug("_4BSMessage get DB value message bytes {} {} {} {} resulted in {} with offset: {} and size: {}",
+                bytes[0], bytes[1], bytes[2], bytes[3], msg, offset, size);
+
+        return msg;
+    }
+
     public byte getDB0() {
         return bytes[3];
     }

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/eep/EEPHelper.java

@@ -12,6 +12,7 @@
  */
 package org.openhab.binding.enocean.internal.eep;
 
+import javax.measure.Unit;
 import javax.measure.quantity.Energy;
 
 import org.eclipse.jdt.annotation.NonNullByDefault;
@@ -22,6 +23,8 @@ import org.openhab.core.library.types.QuantityType;
 import org.openhab.core.library.unit.Units;
 import org.openhab.core.types.State;
 import org.openhab.core.types.UnDefType;
+import org.slf4j.Logger;
+import org.slf4j.LoggerFactory;
 
 /**
  *
@@ -30,6 +33,8 @@ import org.openhab.core.types.UnDefType;
  */
 @NonNullByDefault
 public abstract class EEPHelper {
+    private static final Logger logger = LoggerFactory.getLogger(EEPHelper.class);
+
     public static State validateTotalUsage(State value, @Nullable State currentState, Configuration config) {
         EnOceanChannelTotalusageConfig c = config.as(EnOceanChannelTotalusageConfig.class);
 
@@ -63,4 +68,27 @@ public abstract class EEPHelper {
 
         return value;
     }
+
+    public static boolean validateUnscaledValue(int unscaledValue, double unscaledMin, double unscaledMax) {
+        if (unscaledValue < unscaledMin) {
+            logger.debug("Unscaled value ({}) lower than the minimum allowed ({})", unscaledValue, unscaledMin);
+            return false;
+        } else if (unscaledValue > unscaledMax) {
+            logger.debug("Unscaled value ({}) bigger than the maximum allowed ({})", unscaledValue, unscaledMax);
+            return false;
+        }
+
+        return true;
+    }
+
+    public static State calculateState(int unscaledValue, double scaledMin, double scaledMax, double unscaledMin,
+            double unscaledMax, Unit<?> unit) {
+
+        if (!validateUnscaledValue(unscaledValue, unscaledMin, unscaledMax)) {
+            return UnDefType.UNDEF;
+        }
+
+        double scaledValue = scaledMin + ((unscaledValue * (scaledMax - scaledMin)) / (unscaledMax - unscaledMin));
+        return new QuantityType<>(scaledValue, unit);
+    }
 }

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/eep/EEPType.java

@@ -60,6 +60,13 @@ import org.openhab.binding.enocean.internal.eep.A5_08.A5_08_01;
 import org.openhab.binding.enocean.internal.eep.A5_08.A5_08_01_FXBH;
 import org.openhab.binding.enocean.internal.eep.A5_08.A5_08_02;
 import org.openhab.binding.enocean.internal.eep.A5_08.A5_08_03;
+import org.openhab.binding.enocean.internal.eep.A5_09.A5_09_02;
+import org.openhab.binding.enocean.internal.eep.A5_09.A5_09_04;
+import org.openhab.binding.enocean.internal.eep.A5_09.A5_09_05;
+import org.openhab.binding.enocean.internal.eep.A5_09.A5_09_08;
+import org.openhab.binding.enocean.internal.eep.A5_09.A5_09_09;
+import org.openhab.binding.enocean.internal.eep.A5_09.A5_09_0C;
+import org.openhab.binding.enocean.internal.eep.A5_09.A5_09_0D;
 import org.openhab.binding.enocean.internal.eep.A5_10.A5_10_01;
 import org.openhab.binding.enocean.internal.eep.A5_10.A5_10_02;
 import org.openhab.binding.enocean.internal.eep.A5_10.A5_10_03;
@@ -300,6 +307,17 @@ public enum EEPType {
     LightSensor02(RORG._4BS, 0x06, 0x01, false, "ELTAKO", ELTAKOID, A5_06_01_ELTAKO.class, THING_TYPE_LIGHTSENSOR,
             CHANNEL_ILLUMINATION),
 
+    GasSensor_A5_09_02(RORG._4BS, 0x09, 0x02, false, A5_09_02.class, THING_TYPE_GASSENSOR, CHANNEL_CO,
+            CHANNEL_TEMPERATURE, CHANNEL_BATTERY_VOLTAGE),
+    GasSensor_A5_09_04(RORG._4BS, 0x09, 0x04, false, A5_09_04.class, THING_TYPE_GASSENSOR, CHANNEL_CO2,
+            CHANNEL_TEMPERATURE, CHANNEL_HUMIDITY),
+    GasSensor_A5_09_05(RORG._4BS, 0x09, 0x05, false, A5_09_05.class, THING_TYPE_GASSENSOR, CHANNEL_VOC, CHANNEL_VOC_ID),
+    GasSensor_A5_09_08(RORG._4BS, 0x09, 0x08, false, A5_09_08.class, THING_TYPE_GASSENSOR, CHANNEL_CO2),
+    GasSensor_A5_09_09(RORG._4BS, 0x09, 0x09, false, A5_09_09.class, THING_TYPE_GASSENSOR, CHANNEL_CO2),
+    GasSensor_A5_09_0C(RORG._4BS, 0x09, 0x0C, false, A5_09_0C.class, THING_TYPE_GASSENSOR, CHANNEL_VOC, CHANNEL_VOC_ID),
+    GasSensor_A5_09_0D(RORG._4BS, 0x09, 0x0D, false, A5_09_0D.class, THING_TYPE_GASSENSOR, CHANNEL_HUMIDITY,
+            CHANNEL_TVOC, CHANNEL_TEMPERATURE),
+
     RoomPanel_A5_10_01(RORG._4BS, 0x10, 0x01, false, A5_10_01.class, THING_TYPE_ROOMOPERATINGPANEL, CHANNEL_TEMPERATURE,
             CHANNEL_SETPOINT, CHANNEL_FANSPEEDSTAGE, CHANNEL_OCCUPANCY),
     RoomPanel_A5_10_02(RORG._4BS, 0x10, 0x02, false, A5_10_02.class, THING_TYPE_ROOMOPERATINGPANEL, CHANNEL_TEMPERATURE,

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/handler/EnOceanBaseSensorHandler.java

@@ -56,10 +56,10 @@ public class EnOceanBaseSensorHandler extends EnOceanBaseThingHandler implements
     // List of all thing types which support receiving of eep messages
     public static final Set<ThingTypeUID> SUPPORTED_THING_TYPES = Set.of(THING_TYPE_ROOMOPERATINGPANEL,
             THING_TYPE_MECHANICALHANDLE, THING_TYPE_CONTACT, THING_TYPE_TEMPERATURESENSOR,
-            THING_TYPE_TEMPERATUREHUMIDITYSENSOR, THING_TYPE_ROCKERSWITCH, THING_TYPE_OCCUPANCYSENSOR,
+            THING_TYPE_TEMPERATUREHUMIDITYSENSOR, THING_TYPE_GASSENSOR, THING_TYPE_ROCKERSWITCH,
-            THING_TYPE_LIGHTTEMPERATUREOCCUPANCYSENSOR, THING_TYPE_LIGHTSENSOR, THING_TYPE_PUSHBUTTON,
+            THING_TYPE_OCCUPANCYSENSOR, THING_TYPE_LIGHTTEMPERATUREOCCUPANCYSENSOR, THING_TYPE_LIGHTSENSOR,
-            THING_TYPE_AUTOMATEDMETERSENSOR, THING_TYPE_ENVIRONMENTALSENSOR, THING_TYPE_MULTFUNCTIONSMOKEDETECTOR,
+            THING_TYPE_PUSHBUTTON, THING_TYPE_AUTOMATEDMETERSENSOR, THING_TYPE_ENVIRONMENTALSENSOR,
-            THING_TYPE_WINDOWSASHHANDLESENSOR);
+            THING_TYPE_MULTFUNCTIONSMOKEDETECTOR, THING_TYPE_WINDOWSASHHANDLESENSOR);
 
     protected final Hashtable<RORG, EEPType> receivingEEPTypes = new Hashtable<>();
 

bundles/org.openhab.binding.enocean/src/main/resources/OH-INF/i18n/enocean.properties

@@ -0,0 +1,714 @@
+# add-on
+
+addon.enocean.name = EnOcean Binding
+addon.enocean.description = The EnOcean binding integrates the EnOcean system into openHAB.
+
+# thing types
+
+thing-type.enocean.automatedMeterSensor.label = Automated Meter Sensor
+thing-type.enocean.automatedMeterSensor.description = Sensor for different meters like energy measurement (EEP: A5-12)
+thing-type.enocean.bridge.label = EnOcean Gateway
+thing-type.enocean.bridge.description = The EnOcean gateway connects to an ESP3 device.
+thing-type.enocean.centralCommand.label = Switching/Dimming Actuator
+thing-type.enocean.centralCommand.description = Controls a switching or dimming actuator (EEP: A5-38)
+thing-type.enocean.classicDevice.label = Classic Device
+thing-type.enocean.classicDevice.description = This thing lets you control classic EnOcean devices by rocker switch messages (EEP: F6-02)
+thing-type.enocean.contact.label = Single Input Contact
+thing-type.enocean.contact.description = Single input contact sensor (EEP: D5-00)
+thing-type.enocean.environmentalSensor.label = Environmental Sensor
+thing-type.enocean.environmentalSensor.description = Sensor for different environmental sensors like a weather station (EEP: A5-13)
+thing-type.enocean.gasSensor.label = Gas Sensor
+thing-type.enocean.gasSensor.description = Sensor which sends gas measurement data (EEP: A5-09)
+thing-type.enocean.genericThing.label = Generic Thing
+thing-type.enocean.genericThing.description = Thing whose EEP is unsupported. Use a TRANSFORM to convert things messages.
+thing-type.enocean.heatRecoveryVentilation.label = Heat Recovery Ventilation
+thing-type.enocean.heatRecoveryVentilation.description = Sensor and actuator to control heat recovery ventilation units (EEP: D2-50)
+thing-type.enocean.lightSensor.label = Light Sensor
+thing-type.enocean.lightSensor.description = Sensor which sends light data (EEP: A5-06)
+thing-type.enocean.lightTemperatureOccupancySensor.label = Light/Temperature/Occupancy Sensor
+thing-type.enocean.lightTemperatureOccupancySensor.description = Sensor which sends light, temperature and occupancy data (EEP: A5-08)
+thing-type.enocean.measurementSwitch.label = Energy Measurement Switch
+thing-type.enocean.measurementSwitch.description = Electronic switches and dimmers with energy measurement and local control (EEP: D2-01)
+thing-type.enocean.mechanicalHandle.label = Mechanical Handle
+thing-type.enocean.mechanicalHandle.description = Mechanical handle sensor for window/door handles
+thing-type.enocean.multiFunctionSmokeDetector.label = Multi Function Smoke Detector
+thing-type.enocean.multiFunctionSmokeDetector.description = Multi Function Sensor like a Smoke Detector (EEP: F6-05, D2-14)
+thing-type.enocean.occupancySensor.label = Occupancy Sensor
+thing-type.enocean.occupancySensor.description = Sensor which sends light, supply voltage and occupancy data (EEP: A5-07)
+thing-type.enocean.pushButton.label = Simple Push Button
+thing-type.enocean.pushButton.description = Represents a physical Push Button (EEP: F6-01, D2-03)
+thing-type.enocean.rockerSwitch.label = Rocker Switch
+thing-type.enocean.rockerSwitch.description = Represents a physical Rocker Switch (EEP: F6-02)
+thing-type.enocean.rockerSwitch.channel.rockerSwitchAction.label = Rocker Switch Action
+thing-type.enocean.rockerSwitch.channel.rockerswitchA.label = Rocker Switch - Channel A
+thing-type.enocean.rockerSwitch.channel.rockerswitchB.label = Rocker Switch - Channel B
+thing-type.enocean.rollershutter.label = Rollershutter Actuator
+thing-type.enocean.rollershutter.description = Rollershutter like Eltako FSB14/61/71 or NodOn SIN-2-RS-01 (EEP: A5-37, D2-05)
+thing-type.enocean.roomOperatingPanel.label = Room Operating Panel
+thing-type.enocean.roomOperatingPanel.description = Room operating panel with different kinds of sensors (EEP: A5-10)
+thing-type.enocean.temperatureHumiditySensor.label = Temperature/Humidity Sensor
+thing-type.enocean.temperatureHumiditySensor.description = Sensor which sends temperature and humidity data (EEP: A5-04)
+thing-type.enocean.temperatureSensor.label = Temperature Sensor
+thing-type.enocean.temperatureSensor.description = Sensor which send temperature data (EEP: A5-02)
+thing-type.enocean.thermostat.label = Thermostat
+thing-type.enocean.thermostat.description = Sensor and actuator to control radiator thermostats
+thing-type.enocean.windowSashHandleSensor.label = Sash Handle Sensor
+thing-type.enocean.windowSashHandleSensor.description = Combined sensor for window/door sash state and handle state
+
+# thing types config
+
+thing-type.config.enocean.automatedMeterSensor.enoceanId.label = EnOceanId
+thing-type.config.enocean.automatedMeterSensor.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.automatedMeterSensor.receivingEEPId.label = EEP
+thing-type.config.enocean.automatedMeterSensor.receivingEEPId.description = EEP which is used by panel
+thing-type.config.enocean.automatedMeterSensor.receivingEEPId.option.A5_12_00 = A5-12-00 Counter
+thing-type.config.enocean.automatedMeterSensor.receivingEEPId.option.A5_12_01 = A5-12-01 Electricity
+thing-type.config.enocean.automatedMeterSensor.receivingEEPId.option.A5_12_02 = A5-12-02 Gas
+thing-type.config.enocean.automatedMeterSensor.receivingEEPId.option.A5_12_03 = A5-12-03 Water
+thing-type.config.enocean.bridge.enableSmack.label = Handle SMACK Messages
+thing-type.config.enocean.bridge.enableSmack.description = Declare Gateway as a SMACK Postmaster and handle SMACK messages
+thing-type.config.enocean.bridge.espVersion.label = ESP version of received and transmitting messages
+thing-type.config.enocean.bridge.espVersion.option.ESP3 = ESP3
+thing-type.config.enocean.bridge.espVersion.option.ESP2 = ESP2
+thing-type.config.enocean.bridge.nextSenderId.label = Next Sender Id Offset
+thing-type.config.enocean.bridge.nextSenderId.description = Defines the next device Id, if empty, the next device id is automatically determined
+thing-type.config.enocean.bridge.path.label = Path
+thing-type.config.enocean.bridge.path.description = Path to the EnOcean gateway
+thing-type.config.enocean.bridge.rs485.label = Gateway Connected Directly to RS485 BUS
+thing-type.config.enocean.bridge.rs485BaseId.label = Use following BaseId when connected directly to RS485 BUS
+thing-type.config.enocean.bridge.sendTeachOuts.label = Send TeachOuts
+thing-type.config.enocean.bridge.sendTeachOuts.description = Should a learned in or teach out response been send on a repeated smack teach in request
+thing-type.config.enocean.centralCommand.broadcastMessages.label = Send Broadcast Messages
+thing-type.config.enocean.centralCommand.enoceanId.label = EnOceanId
+thing-type.config.enocean.centralCommand.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.centralCommand.receivingEEPId.label = EEP for Receiving States
+thing-type.config.enocean.centralCommand.receivingEEPId.option.F6_00_00 = PTM200 (F6 message widely used by Eltako devices)
+thing-type.config.enocean.centralCommand.receivingEEPId.option.A5_38_08_02 = Message with dimming value (A5_38_08 sub command 0x02)
+thing-type.config.enocean.centralCommand.receivingEEPId.option.A5_11_04 = Extended lighting status (A5-11-04)
+thing-type.config.enocean.centralCommand.senderIdOffset.label = Sender Id
+thing-type.config.enocean.centralCommand.senderIdOffset.description = Id is used to generate the EnOcean Id (Int between [1-127]). If not specified the next free Id will be determined by bridge
+thing-type.config.enocean.centralCommand.sendingEEPId.label = EEP for Sending Commands
+thing-type.config.enocean.centralCommand.sendingEEPId.option.A5_38_08_01 = Gateway command - switching (A5_38_08 sub command 0x01)
+thing-type.config.enocean.centralCommand.sendingEEPId.option.A5_38_08_02 = Gateway command - dimming (A5_38_08 sub command 0x02)
+thing-type.config.enocean.centralCommand.suppressRepeating.label = Suppress Repeating of Messages
+thing-type.config.enocean.classicDevice.receivingEEPId.label = EEP for Receiving States
+thing-type.config.enocean.classicDevice.receivingEEPId.description = EEP which is used by rocker switch listener(s)
+thing-type.config.enocean.classicDevice.receivingEEPId.option.F6_02_01 = F6-02-01 (upper rocker => DIR1)
+thing-type.config.enocean.classicDevice.receivingEEPId.option.F6_02_02 = F6-02-02 (upper rocker => DIR2)
+thing-type.config.enocean.classicDevice.senderIdOffset.label = Sender Id
+thing-type.config.enocean.classicDevice.senderIdOffset.description = Id is used to generate the EnOcean Id (Int between [1-127]). If not specified the next free Id will be determined by bridge
+thing-type.config.enocean.classicDevice.sendingEEPId.label = EEP for Sending Commands
+thing-type.config.enocean.classicDevice.sendingEEPId.description = EEP which is used to control the device
+thing-type.config.enocean.classicDevice.sendingEEPId.option.F6_02_01 = F6-02-01 (upper rocker => DIR1)
+thing-type.config.enocean.classicDevice.sendingEEPId.option.F6_02_02 = F6-02-02 (upper rocker => DIR2)
+thing-type.config.enocean.classicDevice.suppressRepeating.label = Suppress Repeating of Messages
+thing-type.config.enocean.contact.enoceanId.label = EnOceanId
+thing-type.config.enocean.contact.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.contact.receivingEEPId.label = EEP
+thing-type.config.enocean.contact.receivingEEPId.description = EEP which is used by contact
+thing-type.config.enocean.contact.receivingEEPId.option.D5_00_01 = D5-00-01 single input
+thing-type.config.enocean.contact.receivingEEPId.option.A5_14_01 = A5-14-01 Single input contact, supply voltage monitor
+thing-type.config.enocean.contact.receivingEEPId.option.A5_14_01_ELTAKO = Eltako battery status
+thing-type.config.enocean.contact.receivingEEPId.option.F6_10_00_EltakoFPE = F6-10-00 Eltako FPE-X
+thing-type.config.enocean.contact.receivingSIGEEP.label = Receive Battery Status Signal Messages
+thing-type.config.enocean.environmentalSensor.enoceanId.label = EnOceanId
+thing-type.config.enocean.environmentalSensor.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.environmentalSensor.receivingEEPId.label = EEP
+thing-type.config.enocean.environmentalSensor.receivingEEPId.description = EEP which is used by sensor
+thing-type.config.enocean.environmentalSensor.receivingEEPId.option.A5_13_01 = A5-13-01 Weather station
+thing-type.config.enocean.gasSensor.enoceanId.label = EnOceanId
+thing-type.config.enocean.gasSensor.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.gasSensor.receivingEEPId.label = EEP
+thing-type.config.enocean.gasSensor.receivingEEPId.description = EEP which is used by sensor
+thing-type.config.enocean.gasSensor.receivingEEPId.option.A5_09_02 = A5-09-02 CO sensor (temperature sensor optional)
+thing-type.config.enocean.gasSensor.receivingEEPId.option.A5_09_04 = A5-09-04 CO2 sensor (temperature and humidity sensor optional)
+thing-type.config.enocean.gasSensor.receivingEEPId.option.A5_09_05 = A5-09-05 VOC Sensor
+thing-type.config.enocean.gasSensor.receivingEEPId.option.A5_09_08 = A5-09-08 Pure CO2 sensor
+thing-type.config.enocean.gasSensor.receivingEEPId.option.A5_09_09 = A5-09-09 Pure CO2 sensor with Power Failure Detection
+thing-type.config.enocean.gasSensor.receivingEEPId.option.A5_09_0C = A5-09-0C VOC Sensor
+thing-type.config.enocean.gasSensor.receivingEEPId.option.A5_09_0D = A5-09-0D VOC, humidity + temperature
+thing-type.config.enocean.genericThing.broadcastMessages.label = Send Broadcast Messages
+thing-type.config.enocean.genericThing.enoceanId.label = EnOceanId
+thing-type.config.enocean.genericThing.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.genericThing.receivingEEPId.label = EEP for Receiving States
+thing-type.config.enocean.genericThing.receivingEEPId.option.F6_FF_FF = Generic RPS (F6)
+thing-type.config.enocean.genericThing.receivingEEPId.option.A5_FF_FF = Generic 4BS (A5)
+thing-type.config.enocean.genericThing.receivingEEPId.option.D2_FF_FF = Generic VLD (D2)
+thing-type.config.enocean.genericThing.senderIdOffset.label = Sender Id
+thing-type.config.enocean.genericThing.senderIdOffset.description = Id is used to generate the EnOcean Id (Int between [1-127]). If not specified the next free Id will be determined by bridge
+thing-type.config.enocean.genericThing.sendingEEPId.label = EEP for Sending Commands
+thing-type.config.enocean.genericThing.sendingEEPId.option.F6_FF_FF = Generic RPS (F6)
+thing-type.config.enocean.genericThing.sendingEEPId.option.A5_FF_FF = Generic 4BS (A5)
+thing-type.config.enocean.genericThing.sendingEEPId.option.D2_FF_FF = Generic VLD (D2)
+thing-type.config.enocean.genericThing.suppressRepeating.label = Suppress Repeating of Messages
+thing-type.config.enocean.heatRecoveryVentilation.broadcastMessages.label = Send Broadcast Messages
+thing-type.config.enocean.heatRecoveryVentilation.enoceanId.label = EnOceanId
+thing-type.config.enocean.heatRecoveryVentilation.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.heatRecoveryVentilation.receivingEEPId.label = EEP
+thing-type.config.enocean.heatRecoveryVentilation.receivingEEPId.description = EEP which is used by Ventilation Unit
+thing-type.config.enocean.heatRecoveryVentilation.receivingEEPId.option.D2_50_00 = D2-50-00 Single Room Ventilation Unit
+thing-type.config.enocean.heatRecoveryVentilation.receivingEEPId.option.D2_50_01 = D2-50-01 Single Room Ventilation Unit With Pre-Heater
+thing-type.config.enocean.heatRecoveryVentilation.receivingEEPId.option.D2_50_10 = D2-50-10 Multi Room Ventilation Unit Without Bypass
+thing-type.config.enocean.heatRecoveryVentilation.receivingEEPId.option.D2_50_11 = D2-50-11 Multi Room Ventilation Unit With Bypass
+thing-type.config.enocean.heatRecoveryVentilation.senderIdOffset.label = Sender Id
+thing-type.config.enocean.heatRecoveryVentilation.senderIdOffset.description = Id is used to generate the EnOcean Id (Int between [1-127]). If not specified the next free Id will be determined by bridge
+thing-type.config.enocean.heatRecoveryVentilation.sendingEEPId.label = EEP for Sending Commands
+thing-type.config.enocean.heatRecoveryVentilation.sendingEEPId.option.D2_50_00 = D2-50-00 Single Room Ventilation Unit
+thing-type.config.enocean.heatRecoveryVentilation.sendingEEPId.option.D2_50_01 = D2-50-01 Single Room Ventilation Unit With Pre-Heater
+thing-type.config.enocean.heatRecoveryVentilation.sendingEEPId.option.D2_50_10 = D2-50-10 Multi Room Ventilation Unit Without Bypass
+thing-type.config.enocean.heatRecoveryVentilation.sendingEEPId.option.D2_50_11 = D2-50-11 Multi Room Ventilation Unit With Bypass
+thing-type.config.enocean.heatRecoveryVentilation.suppressRepeating.label = Suppress Repeating of Messages
+thing-type.config.enocean.lightSensor.enoceanId.label = EnOceanId
+thing-type.config.enocean.lightSensor.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.lightSensor.receivingEEPId.label = EEP
+thing-type.config.enocean.lightSensor.receivingEEPId.description = EEP which is used by sensor
+thing-type.config.enocean.lightSensor.receivingEEPId.option.A5_06_01 = A5-06-01
+thing-type.config.enocean.lightSensor.receivingEEPId.option.A5_06_01_ELTAKO = A5-06-01 ELTAKO
+thing-type.config.enocean.lightSensor.receivingSIGEEP.label = Receive Battery Status Signal Messages
+thing-type.config.enocean.lightTemperatureOccupancySensor.enoceanId.label = EnOceanId
+thing-type.config.enocean.lightTemperatureOccupancySensor.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.lightTemperatureOccupancySensor.receivingEEPId.label = EEP
+thing-type.config.enocean.lightTemperatureOccupancySensor.receivingEEPId.description = EEP which is used by sensor
+thing-type.config.enocean.lightTemperatureOccupancySensor.receivingEEPId.option.A5_08_01 = A5-08-01 temperature range [0;51], lux range [0;510]
+thing-type.config.enocean.lightTemperatureOccupancySensor.receivingEEPId.option.A5_08_02 = A5-08-02 temperature range [0;51], lux range [0;1020]
+thing-type.config.enocean.lightTemperatureOccupancySensor.receivingEEPId.option.A5_08_03 = A5-08-03 temperature range [-30;50], lux range [0;1530]
+thing-type.config.enocean.lightTemperatureOccupancySensor.receivingEEPId.option.A5_08_01_FXBH = Eltako FxBH lux range [0;2048]
+thing-type.config.enocean.lightTemperatureOccupancySensor.receivingSIGEEP.label = Receive Battery Status Signal Messages
+thing-type.config.enocean.measurementSwitch.broadcastMessages.label = Send Broadcast Messages
+thing-type.config.enocean.measurementSwitch.enoceanId.label = EnOceanId
+thing-type.config.enocean.measurementSwitch.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.measurementSwitch.pollingInterval.label = Polling Interval
+thing-type.config.enocean.measurementSwitch.pollingInterval.description = Time in seconds after a refresh is triggerd, 0 to disable
+thing-type.config.enocean.measurementSwitch.receivingEEPId.label = EEP for Receiving Commands
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_00 = Switching and energy measurement (EEP: D2_01_00)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_01 = Switching (EEP: D2_01_01)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_02 = Switching, dimming and energy measurement (EEP: D2_01_02)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_03 = Switching and dimming (EEP: D2_01_03)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_04 = Switching, dimming and energy measurement (EEP: D2_01_04)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_05 = Switching, dimming and energy measurement (EEP: D2_01_05)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_06 = Switching and energy measurement (EEP: D2_01_06)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_07 = Switching (EEP: D2_01_07)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_08 = Switching, dimming and energy measurement (EEP: D2_01_08)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_09 = Switching, dimming and energy measurement (EEP: D2_01_09)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_09_PERMUNDO = Permundo PSC
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_0A = Switching and energy measurement (EEP: D2_01_0A)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_0B = Switching and energy measurement (EEP: D2_01_0B)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_0C = Switching and energy measurement (EEP: D2_01_0C)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_0D = Switching (EEP: D2_01_0D)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_0E = Switching and energy measurement (EEP: D2_01_0E)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_0F = Switching (EEP: D2_01_0F)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_0F_NODON = NodON SIN-2-1-00 (EEP: D2_01_0F)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_11 = Switching (EEP: D2_01_11)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_12 = Switching (EEP: D2_01_12)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.D2_01_12_NODON = NodON SIN-2-2-0x (EEP: D2_01_12)
+thing-type.config.enocean.measurementSwitch.receivingEEPId.option.A5_12_01 = AMR Electricity (EEP: A5_12_01)
+thing-type.config.enocean.measurementSwitch.senderIdOffset.label = Sender Id
+thing-type.config.enocean.measurementSwitch.senderIdOffset.description = Id is used to generate the EnOcean Id (Int between [1-127]). If not specified the next free Id will be determined by bridge
+thing-type.config.enocean.measurementSwitch.sendingEEPId.label = EEP for Sending Commands
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_00 = Switching and energy measurement (EEP: D2_01_00)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_01 = Switching (EEP: D2_01_01)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_02 = Switching, dimming and energy measurement (EEP: D2_01_02)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_03 = Switching and dimming (EEP: D2_01_03)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_04 = Switching, dimming and energy measurement (EEP: D2_01_04)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_05 = Switching, dimming and energy measurement (EEP: D2_01_05)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_06 = Switching and energy measurement (EEP: D2_01_06)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_07 = Switching (EEP: D2_01_07)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_08 = Switching, dimming and energy measurement (EEP: D2_01_08)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_09 = Switching, dimming and energy measurement (EEP: D2_01_09)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_09_PERMUNDO = Permundo PSC
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_0A = Switching and energy measurement (EEP: D2_01_0A)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_0B = Switching and energy measurement (EEP: D2_01_0B)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_0C = Switching and energy measurement (EEP: D2_01_0C)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_0D = Switching (EEP: D2_01_0D)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_0E = Switching and energy measurement (EEP: D2_01_0E)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_0F = Switching (EEP: D2_01_0F)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_0F_NODON = NodON SIN-2-1-00 (EEP: D2_01_0F)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_11 = Switching (EEP: D2_01_11)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_12 = Switching (EEP: D2_01_12)
+thing-type.config.enocean.measurementSwitch.sendingEEPId.option.D2_01_12_NODON = NodON SIN-2-2-0x (EEP: D2_01_12)
+thing-type.config.enocean.measurementSwitch.suppressRepeating.label = Suppress Repeating of Messages
+thing-type.config.enocean.mechanicalHandle.enoceanId.label = EnOceanId
+thing-type.config.enocean.mechanicalHandle.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.mechanicalHandle.receivingEEPId.label = EEP
+thing-type.config.enocean.mechanicalHandle.receivingEEPId.description = EEP which is used by handle
+thing-type.config.enocean.mechanicalHandle.receivingEEPId.option.F6_10_00 = F6-10-00
+thing-type.config.enocean.mechanicalHandle.receivingEEPId.option.F6_10_01 = F6-10-01
+thing-type.config.enocean.mechanicalHandle.receivingEEPId.option.A5_14_09 = A5-14-09
+thing-type.config.enocean.mechanicalHandle.receivingEEPId.option.A5_14_0A = A5-14-0A
+thing-type.config.enocean.mechanicalHandle.receivingEEPId.option.D2_06_01_Soda = D2_06_01 (Soda handle)
+thing-type.config.enocean.mechanicalHandle.receivingSIGEEP.label = Receive Battery Status Signal Messages
+thing-type.config.enocean.multiFunctionSmokeDetector.enoceanId.label = EnOceanId
+thing-type.config.enocean.multiFunctionSmokeDetector.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.multiFunctionSmokeDetector.receivingEEPId.label = EEP
+thing-type.config.enocean.multiFunctionSmokeDetector.receivingEEPId.description = EEP which is used by sensor
+thing-type.config.enocean.multiFunctionSmokeDetector.receivingEEPId.option.F6_05_02 = F6-05-02 smoke detector
+thing-type.config.enocean.multiFunctionSmokeDetector.receivingEEPId.option.D2_14_30 = D2-14-30 multi function sensor for smoke
+thing-type.config.enocean.multiFunctionSmokeDetector.receivingEEPId.option.A5_30_03_ELTAKO = A5-30-03 Eltako smoke detectors (FHMB, FRWB)
+thing-type.config.enocean.occupancySensor.enoceanId.label = EnOceanId
+thing-type.config.enocean.occupancySensor.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.occupancySensor.receivingEEPId.label = EEP
+thing-type.config.enocean.occupancySensor.receivingEEPId.description = EEP which is used by sensor
+thing-type.config.enocean.occupancySensor.receivingEEPId.option.A5_07_01 = A5-07-01 battery voltage (optional)
+thing-type.config.enocean.occupancySensor.receivingEEPId.option.A5_07_02 = A5-07-02 battery voltage
+thing-type.config.enocean.occupancySensor.receivingEEPId.option.A5_07_03 = A5-07-03 battery voltage, lux range [0;1000]
+thing-type.config.enocean.occupancySensor.receivingSIGEEP.label = Receive Battery Status Signal Messages
+thing-type.config.enocean.pushButton.enoceanId.label = EnOceanId
+thing-type.config.enocean.pushButton.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.pushButton.receivingEEPId.label = EEP
+thing-type.config.enocean.pushButton.receivingEEPId.description = EEP which is used by push button
+thing-type.config.enocean.pushButton.receivingEEPId.option.F6_01_01 = F6-01-01
+thing-type.config.enocean.pushButton.receivingEEPId.option.D2_03_0A = D2-03-0A
+thing-type.config.enocean.rockerSwitch.enoceanId.label = EnOceanId
+thing-type.config.enocean.rockerSwitch.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.rockerSwitch.receivingEEPId.label = EEP
+thing-type.config.enocean.rockerSwitch.receivingEEPId.description = EEP which is used by rocker switch
+thing-type.config.enocean.rockerSwitch.receivingEEPId.option.F6_02_01 = F6-02-01 (upper rocker => DIR1)
+thing-type.config.enocean.rockerSwitch.receivingEEPId.option.F6_02_02 = F6-02-02 (upper rocker => DIR2)
+thing-type.config.enocean.rollershutter.broadcastMessages.label = Send Broadcast Messages
+thing-type.config.enocean.rollershutter.enoceanId.label = EnOceanId
+thing-type.config.enocean.rollershutter.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.rollershutter.pollingInterval.label = Polling Interval
+thing-type.config.enocean.rollershutter.pollingInterval.description = Time in seconds after a refresh is triggered, 0 to disable
+thing-type.config.enocean.rollershutter.receivingEEPId.label = EEP for Receiving States
+thing-type.config.enocean.rollershutter.receivingEEPId.option.A5_3F_7F_EltakoFSB = Eltako FSB14/61/71
+thing-type.config.enocean.rollershutter.receivingEEPId.option.A5_3F_7F_EltakoFRM = Eltako FRM60
+thing-type.config.enocean.rollershutter.receivingEEPId.option.D2_05_00 = D2-05-00 Rollershutter
+thing-type.config.enocean.rollershutter.receivingEEPId.option.D2_05_00_NODON = NODON SIN-2-RS-01 (EEP: D2-05-00)
+thing-type.config.enocean.rollershutter.receivingEEPId.option.A5_11_03 = A5-11-03 Rollershutter status
+thing-type.config.enocean.rollershutter.receivingEEPId.option.F6_00_00 = PTM200 Rollershutter status
+thing-type.config.enocean.rollershutter.senderIdOffset.label = Sender Id
+thing-type.config.enocean.rollershutter.senderIdOffset.description = Id is used to generate the EnOcean Id (Int between [1-127]). If not specified the next free Id will be determined by bridge
+thing-type.config.enocean.rollershutter.sendingEEPId.label = EEP for Sending Commands
+thing-type.config.enocean.rollershutter.sendingEEPId.option.A5_3F_7F_EltakoFSB = Eltako FSB14/61/71
+thing-type.config.enocean.rollershutter.sendingEEPId.option.A5_3F_7F_EltakoFRM = Eltako FRM60
+thing-type.config.enocean.rollershutter.sendingEEPId.option.D2_05_00 = D2-05-00 Rollershutter
+thing-type.config.enocean.rollershutter.sendingEEPId.option.D2_05_00_NODON = NODON SIN-2-RS-01 (EEP: D2-05-00)
+thing-type.config.enocean.rollershutter.sendingEEPId.option.A5_38_08_07 = Gateway command - blinds (A5_38_08 sub command 0x07)
+thing-type.config.enocean.rollershutter.suppressRepeating.label = Suppress Repeating of Messages
+thing-type.config.enocean.roomOperatingPanel.enoceanId.label = EnOceanId
+thing-type.config.enocean.roomOperatingPanel.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.label = EEP
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.description = EEP which is used by panel
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_01 = A5-10-01 temperature sensor, set point, fan speed and occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_02 = A5-10-02 temperature sensor, set point, fan speed and day/night control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_03 = A5-10-03 temperature sensor, set point control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_04 = A5-10-04 temperature sensor, set point and fan speed control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_05 = A5-10-05 temperature sensor, set point and occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_06 = A5-10-06 temperature sensor, set point and day/night control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_07 = A5-10-07 temperature sensor, fan speed control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_08 = A5-10-08 temperature sensor, fan speed and occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_09 = A5-10-09 temperature sensor, fan speed and day/night control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_0A = A5-10-0A temperature sensor, set point and single input contact
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_0B = A5-10-0B temperature sensor, single input contact
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_0C = A5-10-0C temperature sensor, occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_0D = A5-10-0D temperature sensor, day/night control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_10 = A5-10-10 temperature and humidity sensor, set point and occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_11 = A5-10-11 temperature and humidity sensor, set point and day/night control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_12 = A5-10-12 temperature and humidity sensor, set point control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_13 = A5-10-13 temperature and humidity sensor, occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_14 = A5-10-14 temperature and humidity sensor, day/night control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_15 = A5-10-15 10 bit temperature sensor, 6 bit set point control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_16 = A5-10-16 10 bit temperature sensor, 6 bit set point, occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_17 = A5-10-17 10 bit temperature sensor, occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_18 = A5-10-18 illumination and temperature sensor, set point, fan speed and occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_19 = A5-10-19 temperature and humidity sensor, set point, fan speed and occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_1A = A5-10-1A supply voltage, temperature sensor, set point, fan speed and occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_1B = A5-10-1B supply voltage, illumination and temperature sensor, fan speed and occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_1C = A5-10-1C illumination and temperature sensor, illumination set point, fan speed and occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_1D = A5-10-1D temperature and humidity sensor, humidity set point, fan speed and occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_1E = A5-10-1E supply voltage, illumination and temperature sensor, fan speed and occupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_1F = A5-10-1F temperature sensor, set point, fan speed, occupancy and unoccupancy control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_20 = A5-10-20 temperature sensor, set point with special heating states
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_21 = A5-10-21 temperature and humidity sensor, set point with special heating states
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_22 = A5-10-22 temperature and humidity sensor, set point and fan speed control
+thing-type.config.enocean.roomOperatingPanel.receivingEEPId.option.A5_10_23 = A5-10-23 temperature and humidity sensor, set point, fan speed and occupancy control
+thing-type.config.enocean.temperatureHumiditySensor.enoceanId.label = EnOceanId
+thing-type.config.enocean.temperatureHumiditySensor.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.temperatureHumiditySensor.receivingEEPId.label = EEP
+thing-type.config.enocean.temperatureHumiditySensor.receivingEEPId.description = EEP which is used by sensor
+thing-type.config.enocean.temperatureHumiditySensor.receivingEEPId.option.A5_04_01 = A5-04-01 temperature sensor range [0;40]
+thing-type.config.enocean.temperatureHumiditySensor.receivingEEPId.option.A5_04_02 = A5-04-02 temperature sensor range [-20;60]
+thing-type.config.enocean.temperatureHumiditySensor.receivingEEPId.option.A5_04_02_ELTAKO = A5-04-02 temperature sensor range [-20;60] with battery indicator
+thing-type.config.enocean.temperatureHumiditySensor.receivingEEPId.option.A5_04_03 = A5-04-03 temperature sensor range (10 bit) [-20;60]
+thing-type.config.enocean.temperatureHumiditySensor.receivingSIGEEP.label = Receive Battery Status Signal Messages
+thing-type.config.enocean.temperatureSensor.enoceanId.label = EnOceanId
+thing-type.config.enocean.temperatureSensor.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.temperatureSensor.receivingEEPId.label = EEP
+thing-type.config.enocean.temperatureSensor.receivingEEPId.description = EEP which is used by panel
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_01 = A5-02-01 temperature sensor range [-40;0]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_02 = A5-02-02 temperature sensor range [-30;10]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_03 = A5-02-03 temperature sensor range [-20;20]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_04 = A5-02-04 temperature sensor range [-10;30]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_05 = A5-02-05 temperature sensor range [0;40]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_06 = A5-02-06 temperature sensor range [10;50]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_07 = A5-02-07 temperature sensor range [20;60]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_08 = A5-02-08 temperature sensor range [30;70]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_09 = A5-02-09 temperature sensor range [40;80]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_0A = A5-02-0A temperature sensor range [50;90]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_0B = A5-02-0B temperature sensor range [60;100]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_10 = A5-02-10 temperature sensor range [-60;20]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_11 = A5-02-11 temperature sensor range [-50;30]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_12 = A5-02-12 temperature sensor range [-40;40]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_13 = A5-02-13 temperature sensor range [-30;50]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_14 = A5-02-14 temperature sensor range [-20;60]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_15 = A5-02-15 temperature sensor range [-10;70]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_16 = A5-02-16 temperature sensor range [0;80]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_17 = A5-02-17 temperature sensor range [1;90]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_18 = A5-02-18 temperature sensor range [20;100]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_19 = A5-02-19 temperature sensor range [30;110]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_1A = A5-02-1A temperature sensor range [40;120]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_1B = A5-02-1B temperature sensor range [50;130]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_20 = A5-02-20 temperature sensor range [-10;41.2]
+thing-type.config.enocean.temperatureSensor.receivingEEPId.option.A5_02_30 = A5-02-30 temperature sensor range [-40;62.3]
+thing-type.config.enocean.temperatureSensor.receivingSIGEEP.label = Receive Battery Status Signal Messages
+thing-type.config.enocean.thermostat.broadcastMessages.label = Send Broadcast Messages
+thing-type.config.enocean.thermostat.enoceanId.label = EnOceanId
+thing-type.config.enocean.thermostat.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.thermostat.receivingEEPId.label = EEP
+thing-type.config.enocean.thermostat.receivingEEPId.description = EEP which is used by sensor
+thing-type.config.enocean.thermostat.receivingEEPId.option.A5_20_04 = Heating radiator valve actuating drive with feed and room temperature measurement, local set point control and display
+thing-type.config.enocean.thermostat.senderIdOffset.label = Sender Id
+thing-type.config.enocean.thermostat.senderIdOffset.description = Id is used to generate the EnOcean Id (Int between [1-127]). If not specified the next free Id will be determined by bridge
+thing-type.config.enocean.thermostat.sendingEEPId.label = EEP for Sending Commands
+thing-type.config.enocean.thermostat.sendingEEPId.option.A5_20_04 = Heating radiator valve actuating drive with feed and room temperature measurement, local set point control and display
+thing-type.config.enocean.thermostat.suppressRepeating.label = Suppress Repeating of Messages
+thing-type.config.enocean.windowSashHandleSensor.enoceanId.label = EnOceanId
+thing-type.config.enocean.windowSashHandleSensor.enoceanId.description = EnOceanId of device this thing belongs to
+thing-type.config.enocean.windowSashHandleSensor.receivingEEPId.label = EEP
+thing-type.config.enocean.windowSashHandleSensor.receivingEEPId.description = EEP which is used by device
+thing-type.config.enocean.windowSashHandleSensor.receivingEEPId.option.D2_06_50_Siegenia = D2_06_50 (Siegenia Senso Secure)
+thing-type.config.enocean.windowSashHandleSensor.receivingSIGEEP.label = Receive Battery Status Signal Messages
+
+# channel types
+
+channel-type.enocean.airQualityValue1.label = Air Quality Value
+channel-type.enocean.airQualityValue1.description = Air quality value of first sensor in percentages
+channel-type.enocean.airQualityValue2.label = Air Quality Value
+channel-type.enocean.airQualityValue2.description = Air quality value of second sensor in percentages
+channel-type.enocean.angle.label = Angle
+channel-type.enocean.angle.description = Blind Angle
+channel-type.enocean.autoOFF.label = Auto Off
+channel-type.enocean.autoOFF.description = Automatically switch to off
+channel-type.enocean.batteryVoltage.label = Battery Voltage
+channel-type.enocean.batteryVoltage.description = Voltage of the battery
+channel-type.enocean.buttonLock.label = Button Lock
+channel-type.enocean.buttonLock.description = Enables or disables buttons on the device.
+channel-type.enocean.co.label = CO
+channel-type.enocean.co.description = CO level in ppm
+channel-type.enocean.co2.label = CO2
+channel-type.enocean.co2.description = CO2 level in ppm
+channel-type.enocean.contact.label = Contact
+channel-type.enocean.contact.description = Contact channel
+channel-type.enocean.coolingProtectionMode.label = Cooling Protection Mode
+channel-type.enocean.coolingProtectionMode.description = Indicates if device is running in cooling protection mode
+channel-type.enocean.counter.label = Counter
+channel-type.enocean.counter.description = Counter
+channel-type.enocean.cumulativeValue.label = Cumulative Value
+channel-type.enocean.currentFlow.label = Current Flow
+channel-type.enocean.currentNumber.label = Current
+channel-type.enocean.currentNumber.description = Current
+channel-type.enocean.defrostMode.label = Defrost Mode
+channel-type.enocean.defrostMode.description = Indicates if defrosting of heat exchanger is active or not
+channel-type.enocean.delayRadioOFF.label = Delay Radio Off
+channel-type.enocean.delayRadioOFF.description = Delay switch off by radio for given seconds
+channel-type.enocean.dimmer.label = Dimmer
+channel-type.enocean.dimmer.description = Dimmer
+channel-type.enocean.displayOrientation.label = Display Orientation
+channel-type.enocean.displayOrientation.description = Orientation of the display.
+channel-type.enocean.displayOrientation.state.option.0 = 0
+channel-type.enocean.displayOrientation.state.option.90 = 90
+channel-type.enocean.displayOrientation.state.option.180 = 180
+channel-type.enocean.displayOrientation.state.option.270 = 270
+channel-type.enocean.drainHeaterStatus.label = Drain Heater Status
+channel-type.enocean.drainHeaterStatus.description = Indicates if drain heater is active or not
+channel-type.enocean.ecoMode.label = Eco Mode
+channel-type.enocean.ecoMode.description = Activates eco mode (disables certain messages)
+channel-type.enocean.energyStorage.label = Energy Storage
+channel-type.enocean.energyStorage.description = ?
+channel-type.enocean.exhaustAirFanAirFlowRate.label = Exhaust Air Fan Air Flow Rate
+channel-type.enocean.exhaustAirFanAirFlowRate.description = Current exhaust air fan air flow rate
+channel-type.enocean.exhaustAirFlapStatus.label = Exhaust Air Flap Position
+channel-type.enocean.exhaustAirFlapStatus.description = Indicates if exhaust air flap is open or closed
+channel-type.enocean.exhaustAirTemperature.label = Exhaust Air Temperature
+channel-type.enocean.exhaustAirTemperature.description = Current exhaust air temperature in degree Celsius
+channel-type.enocean.exhaustFanSpeed.label = Exhaust Fan Speed
+channel-type.enocean.exhaustFanSpeed.description = Exhaust fan speed in revolutions per minutes
+channel-type.enocean.externalInterfaceMode.label = External Interface Mode
+channel-type.enocean.externalInterfaceMode.description = This option is to selected the type of the wired switch
+channel-type.enocean.externalInterfaceMode.state.option.EXTERNALSWITCH = Switch
+channel-type.enocean.externalInterfaceMode.state.option.EXTERNALBUTTON = Push button
+channel-type.enocean.externalInterfaceMode.state.option.EXTERNALAUTO = Auto detect
+channel-type.enocean.failureCode.label = Failure Code
+channel-type.enocean.failureCode.description = Failure code
+channel-type.enocean.fanSpeedStage.label = Fan Speed
+channel-type.enocean.fanSpeedStage.state.option.-1 = Auto
+channel-type.enocean.fanSpeedStage.state.option.0 = Stage 0
+channel-type.enocean.fanSpeedStage.state.option.1 = Stage 1
+channel-type.enocean.fanSpeedStage.state.option.2 = Stage 2
+channel-type.enocean.fanSpeedStage.state.option.3 = Stage 3
+channel-type.enocean.feedTemperature.label = Feed Temperature
+channel-type.enocean.feedTemperature.description = Water temperature in the radiator input
+channel-type.enocean.fireplaceSafetyMode.label = Fireplace Safety Mode
+channel-type.enocean.fireplaceSafetyMode.description = Indicates if device is running in fireplace safety mode
+channel-type.enocean.generalSwitch.label = Switch
+channel-type.enocean.generalSwitch.description = The switch channel allows to switch something on and off.
+channel-type.enocean.generalSwitchA.label = Switch Channel A
+channel-type.enocean.generalSwitchA.description = The switch channel allows to switch channel A on and off.
+channel-type.enocean.generalSwitchB.label = Switch Channel B
+channel-type.enocean.generalSwitchB.description = The switch channel allows to switch channel B on and off.
+channel-type.enocean.genericColor.label = Color
+channel-type.enocean.genericDimmer.label = Dimmer
+channel-type.enocean.genericDimmer.description = Dimmer
+channel-type.enocean.genericNumber.label = Number
+channel-type.enocean.genericNumber.description = Number
+channel-type.enocean.genericRollershutter.label = Rollershutter
+channel-type.enocean.genericRollershutter.description = Rollershutter
+channel-type.enocean.genericString.label = String
+channel-type.enocean.genericSwitch.label = Switch
+channel-type.enocean.genericSwitch.description = The switch channel allows to switch something on and off.
+channel-type.enocean.genericTeachInCMD.label = Teach In
+channel-type.enocean.genericTeachInCMD.description = The teach in channel allows to send a teach in msg.
+channel-type.enocean.heatExchangerBypassStatus.label = Heat Exchanger Bypass Status
+channel-type.enocean.heatExchangerBypassStatus.description = Indicates if heat exchanger bypass is open (heat recovery inactive) or closed (heat recovery active)
+channel-type.enocean.humidity.label = Humidity
+channel-type.enocean.humidity.description = Relative humidity level in percentages
+channel-type.enocean.hygroComfortIndex.label = Hygrothermal Comfort Index
+channel-type.enocean.hygroComfortIndex.description = Comfort index based on temperature and humidity
+channel-type.enocean.hygroComfortIndex.state.option.GOOD = Good
+channel-type.enocean.hygroComfortIndex.state.option.MEDIUM = Medium
+channel-type.enocean.hygroComfortIndex.state.option.BAD = Bad
+channel-type.enocean.hygroComfortIndex.state.option.ERROR = Error
+channel-type.enocean.illumination.label = Lux
+channel-type.enocean.illumination.description = Illumination in lux
+channel-type.enocean.illuminationEast.label = Sun East
+channel-type.enocean.illuminationEast.description = Illumination in lux
+channel-type.enocean.illuminationSouthNorth.label = Sun South/North
+channel-type.enocean.illuminationSouthNorth.description = Illumination in lux
+channel-type.enocean.illuminationWest.label = Sun West
+channel-type.enocean.illuminationWest.description = Illumination in lux
+channel-type.enocean.indoorAirAnalysis.label = Indoor Air Analysis
+channel-type.enocean.indoorAirAnalysis.description = Indoor air quality analysis based on temperature and humidity
+channel-type.enocean.indoorAirAnalysis.state.option.OPTIMAL = Optimal air range
+channel-type.enocean.indoorAirAnalysis.state.option.DRY = Dry air range
+channel-type.enocean.indoorAirAnalysis.state.option.HIGH_HUMIDITY = High humidity range
+channel-type.enocean.indoorAirAnalysis.state.option.HIGH_TEMPHUMI = High humidity and temperature range
+channel-type.enocean.indoorAirAnalysis.state.option.OUT_OF_RANGE = Humidity or temperature out of range
+channel-type.enocean.indoorAirAnalysis.state.option.RESERVED1 = Reserved1
+channel-type.enocean.indoorAirAnalysis.state.option.RESERVED2 = Reserved2
+channel-type.enocean.indoorAirAnalysis.state.option.ERROR = Error
+channel-type.enocean.indoorAirTemperature.label = Indoor Temperature
+channel-type.enocean.indoorAirTemperature.description = Current indoor air temperature in degree Celsius
+channel-type.enocean.instantpower.label = Instant Power
+channel-type.enocean.instantpower.description = Instant power consumption in Watts
+channel-type.enocean.lastReceived.label = LastReceived
+channel-type.enocean.lastReceived.description = Date and time the last telegram was received
+channel-type.enocean.maintenanceStatus.label = Maintenance Neccessary
+channel-type.enocean.maintenanceStatus.description = Sensor maintenance status.
+channel-type.enocean.measurementControl.label = Measurement Control
+channel-type.enocean.measurementControl.description = Enables or disables temperature measurement on the device.
+channel-type.enocean.occupancy.label = Occupancy
+channel-type.enocean.occupancy.description = Occupancy button pressed or released.
+channel-type.enocean.outdoorAirHeaterStatus.label = Outdoor Air Heater Status
+channel-type.enocean.outdoorAirHeaterStatus.description = Indicates if outdoor air heater is active or not
+channel-type.enocean.outdoorAirTemperature.label = Outdoor Temperature
+channel-type.enocean.outdoorAirTemperature.description = Current outdoor air temperature in degree Celsius
+channel-type.enocean.protectionPlusEvent.label = Protection Plus Event
+channel-type.enocean.protectionPlusEvent.description = Triggered when a Protection Plus capable device detects a break-in attempt.
+channel-type.enocean.rainStatus.label = Rain
+channel-type.enocean.rainStatus.description = Rain indicator
+channel-type.enocean.remainingPLT.label = Remaining Product Life Time
+channel-type.enocean.remainingPLT.description = Countdown time until product end of life.
+channel-type.enocean.repeatCount.label = RepeatCount
+channel-type.enocean.repeatCount.description = Number of repeaters involved in the transmission of the telegram
+channel-type.enocean.repeaterMode.label = Repeater Mode
+channel-type.enocean.repeaterMode.description = Repeater mode of EnOcean gateway/device
+channel-type.enocean.repeaterMode.state.option.OFF = Repeater off
+channel-type.enocean.repeaterMode.state.option.LEVEL1 = Level-1
+channel-type.enocean.repeaterMode.state.option.LEVEL2 = Level-2
+channel-type.enocean.rockerSwitchAction.label = Rocker Switch Action
+channel-type.enocean.rockerSwitchAction.description = Is triggered when a certain combination of rockers is pressed or released.
+channel-type.enocean.rockerswitchListenerRollershutter.label = Rocker Switch Listener (Rollershutter)
+channel-type.enocean.rockerswitchListenerSwitch.label = Rocker Switch Listener (Switch)
+channel-type.enocean.rollershutter.label = Rollershutter
+channel-type.enocean.rollershutter.description = Rollershutter
+channel-type.enocean.roomTemperatureControlStatus.label = Room Temperature Control Status
+channel-type.enocean.roomTemperatureControlStatus.description = Indicates if room temperature control is active or not
+channel-type.enocean.rssi.label = RSSI
+channel-type.enocean.rssi.description = Received Signal Strength Indication
+channel-type.enocean.saHumidityRange.label = Out of Humidity Range
+channel-type.enocean.saHumidityRange.description = Sensor analysis status: humidity out of range
+channel-type.enocean.saTemperatureRange.label = Out of Temperature Range
+channel-type.enocean.saTemperatureRange.description = Sensor analysis status: temperature out of range
+channel-type.enocean.sensorFault.label = Sensor Fault Mode
+channel-type.enocean.sensorFault.description = Sensor activated fault mode.
+channel-type.enocean.serviceCommand.label = Service Command
+channel-type.enocean.serviceCommand.description = Command to be sent to actuator
+channel-type.enocean.serviceCommand.state.option.0 = no change
+channel-type.enocean.serviceCommand.state.option.1 = open valve
+channel-type.enocean.serviceCommand.state.option.2 = run initialisation
+channel-type.enocean.serviceCommand.state.option.3 = close valve
+channel-type.enocean.setBaseId.label = Set Base Id
+channel-type.enocean.setBaseId.description = Set base id of EnOcean gateway. Use this with care! Must be between 0xFF800000 and 0xFFFFFF80
+channel-type.enocean.setPoint.label = Set Point
+channel-type.enocean.setPoint.description = linear set point
+channel-type.enocean.smokeDetection.label = Smoke Detected
+channel-type.enocean.smokeDetection.description = Smoke detection sensor state.
+channel-type.enocean.statusRequestEvent.label = Status Request Event
+channel-type.enocean.statusRequestEvent.description = Is triggered when the actuator wakes up from sleep and asks for the current status.
+channel-type.enocean.supplyAirFanAirFlowRate.label = Supply Air Fan Air Flow Rate
+channel-type.enocean.supplyAirFanAirFlowRate.description = Current supply air fan air flow rate
+channel-type.enocean.supplyAirFlapStatus.label = Supply Air Flap Position
+channel-type.enocean.supplyAirFlapStatus.description = Indicates if supply air flap is open or closed
+channel-type.enocean.supplyAirHeaterStatus.label = Supply Air Heater Status
+channel-type.enocean.supplyAirHeaterStatus.description = Indicates if supply air heater is active or not
+channel-type.enocean.supplyAirTemperature.label = Supply Air Temperature
+channel-type.enocean.supplyAirTemperature.description = Current supply air temperature in degree Celsius
+channel-type.enocean.supplyFanSpeed.label = Supply Fan Speed
+channel-type.enocean.supplyFanSpeed.description = Supply fan speed in revolutions per minutes
+channel-type.enocean.teachInCMD.label = Teach In
+channel-type.enocean.teachInCMD.description = The teach in channel allows to send a teach in msg.
+channel-type.enocean.temperature.label = Temperature
+channel-type.enocean.temperature.description = Current temperature in degree Celsius
+channel-type.enocean.temperatureSetPoint.label = Set Point
+channel-type.enocean.temperatureSetPoint.description = Desired temperature
+channel-type.enocean.timeSinceLastMaintenance.label = Time Since Last Maintenance
+channel-type.enocean.timeSinceLastMaintenance.description = Time since last maintenance was done.
+channel-type.enocean.timerOperationMode.label = Timer Operation Mode
+channel-type.enocean.timerOperationMode.description = Indicates if timer operation mode is active or not
+channel-type.enocean.totalVolatileOrganicCompounds.label = TVOC
+channel-type.enocean.totalVolatileOrganicCompounds.description = Total volatile organic compounds level in ppb/
+channel-type.enocean.totalusage.label = Total Usage
+channel-type.enocean.totalusage.description = Used energy in Kilowatt hours
+channel-type.enocean.twoStateSwitch.label = Switching State
+channel-type.enocean.twoStateSwitch.description = Switch state according to specific on/off positions (otherwise toggle)
+channel-type.enocean.vacationModeToggleEvent.label = Vacation Mode Toggle Event
+channel-type.enocean.vacationModeToggleEvent.description = Triggered when the vacation mode has been toggled on the device.
+channel-type.enocean.valvePosition.label = Valve Position
+channel-type.enocean.valvePosition.description = Indicates the actual percent position of the valve.
+channel-type.enocean.ventilationOperationMode.label = Direct Operation Mode Control
+channel-type.enocean.ventilationOperationMode.description = Sets the ventilation mode/level.
+channel-type.enocean.ventilationOperationMode.state.option.0 = Off
+channel-type.enocean.ventilationOperationMode.state.option.1 = Level 1
+channel-type.enocean.ventilationOperationMode.state.option.2 = Level 2
+channel-type.enocean.ventilationOperationMode.state.option.3 = Level 3
+channel-type.enocean.ventilationOperationMode.state.option.4 = Level 4
+channel-type.enocean.ventilationOperationMode.state.option.5 = Reserved
+channel-type.enocean.ventilationOperationMode.state.option.6 = Reserved
+channel-type.enocean.ventilationOperationMode.state.option.7 = Reserved
+channel-type.enocean.ventilationOperationMode.state.option.8 = Reserved
+channel-type.enocean.ventilationOperationMode.state.option.9 = Reserved
+channel-type.enocean.ventilationOperationMode.state.option.10 = Reserved
+channel-type.enocean.ventilationOperationMode.state.option.11 = Automatic
+channel-type.enocean.ventilationOperationMode.state.option.12 = Automatic on demand
+channel-type.enocean.ventilationOperationMode.state.option.13 = Supply air only
+channel-type.enocean.ventilationOperationMode.state.option.14 = Exhaust air only
+channel-type.enocean.ventilationOperationMode.state.option.15 = Reserved
+channel-type.enocean.vibration.label = Vibration Alarm
+channel-type.enocean.vibration.description = Vibration alarm state.
+channel-type.enocean.virtualRockerswitchB.label = Rocker Switch - Channel B
+channel-type.enocean.virtualRockerswitchB.description = The virtual rocker switch channel allows to send rocker msg with channel B.
+channel-type.enocean.virtualRollershutterA.label = Rollershutter
+channel-type.enocean.virtualRollershutterA.description = This channels allows to control a rollershutter through rocker msg.
+channel-type.enocean.virtualSwitchA.label = Rocker Switch
+channel-type.enocean.virtualSwitchA.description = The virtual rocker switch channel allows to send rocker msg.
+channel-type.enocean.volatileOrganicCompounds.label = VOC
+channel-type.enocean.volatileOrganicCompounds.description = Volatile organic compounds level in ppm/
+channel-type.enocean.volatileOrganicCompoundsId.label = VOC ID
+channel-type.enocean.volatileOrganicCompoundsId.description = Volatile organic compounds identification
+channel-type.enocean.wakeUpCycle.label = Wakeup Cycle
+channel-type.enocean.wakeUpCycle.description = Defines the cyclic wake-up time. The time corresponding to the number has to be looked up.
+channel-type.enocean.weeklyTimerProgramStatus.label = Weekly Timer Program Status
+channel-type.enocean.weeklyTimerProgramStatus.description = Indicates if device is running according to configured program or not
+channel-type.enocean.windowBreachEvent.label = Window Breach Event
+channel-type.enocean.windowBreachEvent.description = Is triggered 10 times in 5 seconds when the sensor detects a break-in attempt.
+channel-type.enocean.windowCalibrationState.label = Window Calibration State
+channel-type.enocean.windowCalibrationState.description = Describes the window calibration state
+channel-type.enocean.windowCalibrationState.state.option.OK = Ok
+channel-type.enocean.windowCalibrationState.state.option.ERROR = Error
+channel-type.enocean.windowCalibrationState.state.option.INVALID = Invalid
+channel-type.enocean.windowCalibrationStep.label = Window Calibration Step
+channel-type.enocean.windowCalibrationStep.description = Calibration step that should be performed next
+channel-type.enocean.windowCalibrationStep.state.option.NONE = None
+channel-type.enocean.windowCalibrationStep.state.option.SASH\ CLOSED\ HANDLE\ CLOSED = Sash closed handle closed
+channel-type.enocean.windowCalibrationStep.state.option.SASH\ CLOSED\ HANDLE\ OPEN = Sash closed handle open
+channel-type.enocean.windowCalibrationStep.state.option.SASH\ CLOSED\ HANDLE\ TILTED = Sash closed handle tilted
+channel-type.enocean.windowCalibrationStep.state.option.SASH\ OPEN\ HANDLE\ CLOSED = Sash open handle closed
+channel-type.enocean.windowCalibrationStep.state.option.SASH\ OPEN\ HANDLE\ OPEN = Sash open handle open
+channel-type.enocean.windowCalibrationStep.state.option.SASH\ OPEN\ HANDLE\ TILTED = Sash open handle tilted
+channel-type.enocean.windowCalibrationStep.state.option.SASH\ TILTED\ HANDLE\ CLOSED = Sash tilted handle closed
+channel-type.enocean.windowCalibrationStep.state.option.SASH\ TILTED\ HANDLE\ OPEN = Sash tilted handle open
+channel-type.enocean.windowCalibrationStep.state.option.SASH\ TILTED\ HANDLE\ TILTED = Sash tilted handle tilted
+channel-type.enocean.windowCalibrationStep.state.option.FRAME\ MAGNET\ VALIDATION = Frame magnet validation
+channel-type.enocean.windowHandleState.label = Window Handle State
+channel-type.enocean.windowHandleState.description = Describes the window handle state
+channel-type.enocean.windowHandleState.state.option.OPEN = Open
+channel-type.enocean.windowHandleState.state.option.TILTED = Tilted
+channel-type.enocean.windowHandleState.state.option.CLOSED = Closed
+channel-type.enocean.windowHandleState.state.option.UP = Up
+channel-type.enocean.windowHandleState.state.option.DOWN = Down
+channel-type.enocean.windowHandleState.state.option.LEFT = Left
+channel-type.enocean.windowHandleState.state.option.RIGHT = Right
+channel-type.enocean.windowSashState.label = Window Sash State
+channel-type.enocean.windowSashState.description = Describes the window sash state
+channel-type.enocean.windowSashState.state.option.OPEN = Open
+channel-type.enocean.windowSashState.state.option.TILTED = Tilted
+channel-type.enocean.windowSashState.state.option.NOT\ TILTED = Not Tilted
+channel-type.enocean.windowSashState.state.option.CLOSED = Closed
+
+# channel types config
+
+channel-type.config.enocean.contact.inverted.label = Invert Open/Closed
+channel-type.config.enocean.contact.inverted.description = True for Eltako FPE-2, false otherwise.
+channel-type.config.enocean.counter.tariff.label = Tariff info
+channel-type.config.enocean.counter.tariff.description = Number of tariff this channel listens to
+channel-type.config.enocean.cumulativeValue.tariff.label = Tariff info
+channel-type.config.enocean.cumulativeValue.tariff.description = Number of tariff this channel listens to
+channel-type.config.enocean.currentFlow.tariff.label = Tariff info
+channel-type.config.enocean.currentFlow.tariff.description = Number of tariff this channel listens to
+channel-type.config.enocean.currentNumber.tariff.label = Tariff info
+channel-type.config.enocean.currentNumber.tariff.description = Number of tariff this channel listens to
+channel-type.config.enocean.dimmer.eltakoDimmer.label = Eltako Dimmer
+channel-type.config.enocean.dimmer.eltakoDimmer.description = True for Eltako dimmer, false otherwise. Defaults to true for compatibility purpose.
+channel-type.config.enocean.dimmer.rampingTime.label = Ramping Time
+channel-type.config.enocean.dimmer.rampingTime.description = A5-38-08: Ramping Time (in seconds), 0 = no ramping, 1..255 = seconds to 100%; D2-01-01: 0 = switch, 1-3 = timer 1-3, 4 = stop
+channel-type.config.enocean.dimmer.storeValue.label = Store Value
+channel-type.config.enocean.dimmer.storeValue.description = Store final value
+channel-type.config.enocean.genericChannel.transformationFunction.label = Transformation Function
+channel-type.config.enocean.genericChannel.transformationFunction.description = The transformation function, e.g. for transformation type map => filename of mapping file
+channel-type.config.enocean.genericChannel.transformationType.label = Transformation Type
+channel-type.config.enocean.genericChannel.transformationType.description = The type of the transformation, e.g. "MAP"
+channel-type.config.enocean.instantpower.tariff.label = Tariff info
+channel-type.config.enocean.instantpower.tariff.description = Number of tariff this channel listens to
+channel-type.config.enocean.instantpower.validateValue.label = Validate Value
+channel-type.config.enocean.instantpower.validateValue.description = Filter out increases more than 10.0 kWh and decreases less than 1.0 kWh
+channel-type.config.enocean.listeningRockerChannel.channel.label = Channel
+channel-type.config.enocean.listeningRockerChannel.channel.description = Channel of rocker switch to listen to
+channel-type.config.enocean.listeningRockerChannel.channel.option.channelA = Channel A
+channel-type.config.enocean.listeningRockerChannel.channel.option.channelB = Channel B
+channel-type.config.enocean.listeningRockerChannel.enoceanId.label = EnOceanId
+channel-type.config.enocean.listeningRockerChannel.enoceanId.description = EnOcean Id to listen to
+channel-type.config.enocean.listeningRockerChannel.handleSecondAction.label = Handle Second Action
+channel-type.config.enocean.listeningRockerChannel.handleSecondAction.description = React if selected channel is pressed as second action too
+channel-type.config.enocean.listeningRockerChannel.switchMode.label = Switch Mode
+channel-type.config.enocean.listeningRockerChannel.switchMode.option.rockerSwitch = Rocker switch
+channel-type.config.enocean.listeningRockerChannel.switchMode.option.toggleButtonDir1 = Toggle button (upper button)
+channel-type.config.enocean.listeningRockerChannel.switchMode.option.toggleButtonDir2 = Toggle button (lower button)
+channel-type.config.enocean.rollershutter.shutTime.label = Shut Time
+channel-type.config.enocean.rollershutter.shutTime.description = Time (in seconds) to completely close the rollershutter
+channel-type.config.enocean.teachInCMD.manufacturerId.label = Manufacturer Id
+channel-type.config.enocean.teachInCMD.manufacturerId.description = Id is used for 4BS teach in with EEP
+channel-type.config.enocean.teachInCMD.teachInMSG.label = Teach in Message
+channel-type.config.enocean.teachInCMD.teachInMSG.description = Use this message if teach in type and/or manufacturer id are unknown
+channel-type.config.enocean.totalusage.tariff.label = Tariff info
+channel-type.config.enocean.totalusage.tariff.description = Number of tariff this channel listens to
+channel-type.config.enocean.totalusage.validateValue.label = Validate Value
+channel-type.config.enocean.totalusage.validateValue.description = Filter out increases more than 10.0 kWh and decreases less than 1.0 kWh
+channel-type.config.enocean.virtualRockerChannel.duration.label = Time Between Press and Release Message
+channel-type.config.enocean.virtualRockerChannel.switchMode.label = Switch Mode
+channel-type.config.enocean.virtualRockerChannel.switchMode.option.rockerSwitch = Rocker switch
+channel-type.config.enocean.virtualRockerChannel.switchMode.option.toggleButtonDir1 = Toggle button (upper button)
+channel-type.config.enocean.virtualRockerChannel.switchMode.option.toggleButtonDir2 = Toggle button (lower button)
+channel-type.config.enocean.virtualRockerswitchB.switchMode.label = Switch Mode
+channel-type.config.enocean.virtualRockerswitchB.switchMode.option.rockerSwitch = Rocker Switch
+channel-type.config.enocean.virtualRockerswitchB.switchMode.option.toggleButtonDir1 = Toggle Button (upper button)
+channel-type.config.enocean.virtualRockerswitchB.switchMode.option.toggleButtonDir2 = Toggle Button (lower button)

bundles/org.openhab.binding.enocean/src/main/resources/OH-INF/thing/GasSensor.xml

@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<thing:thing-descriptions bindingId="enocean"
+	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+	xmlns:thing="https://openhab.org/schemas/thing-description/v1.0.0"
+	xsi:schemaLocation="https://openhab.org/schemas/thing-description/v1.0.0 https://openhab.org/schemas/thing-description-1.0.0.xsd">
+
+	<thing-type id="gasSensor">
+		<supported-bridge-type-refs>
+			<bridge-type-ref id="bridge"/>
+		</supported-bridge-type-refs>
+
+		<label>Gas Sensor</label>
+		<description>Sensor which sends gas measurement data (EEP: A5-09)</description>
+
+		<config-description>
+			<parameter name="enoceanId" type="text" required="true">
+				<label>EnOceanId</label>
+				<description>EnOceanId of device this thing belongs to</description>
+			</parameter>
+			<parameter name="receivingEEPId" type="text" required="true">
+				<label>EEP</label>
+				<description>EEP which is used by sensor</description>
+				<options>
+					<option value="A5_09_02">A5-09-02 CO sensor (temperature sensor optional)</option>
+					<option value="A5_09_04">A5-09-04 CO2 sensor (temperature and humidity sensor optional)</option>
+					<option value="A5_09_05">A5-09-05 VOC Sensor</option>
+					<option value="A5_09_08">A5-09-08 Pure CO2 sensor</option>
+					<option value="A5_09_09">A5-09-09 Pure CO2 sensor with Power Failure Detection</option>
+					<option value="A5_09_0C">A5-09-0C VOC Sensor</option>
+					<option value="A5_09_0D">A5-09-0D VOC, humidity + temperature</option>
+				</options>
+				<limitToOptions>true</limitToOptions>
+			</parameter>
+		</config-description>
+
+	</thing-type>
+
+</thing:thing-descriptions>

bundles/org.openhab.binding.enocean/src/main/resources/OH-INF/thing/channels.xml

@@ -103,6 +103,66 @@
 		<state min="0" max="100" pattern="%.1f %%" readOnly="true"/>
 	</channel-type>
 
+	<channel-type id="co2">
+		<item-type>Number:Dimensionless</item-type>
+		<label>CO2</label>
+		<description>CO2 level in ppm</description>
+		<category>Carbondioxide</category>
+		<tags>
+			<tag>Measurement</tag>
+			<tag>CO2</tag>
+		</tags>
+		<state pattern="%.1f %unit%" readOnly="true"/>
+	</channel-type>
+
+	<channel-type id="co">
+		<item-type>Number:Dimensionless</item-type>
+		<label>CO</label>
+		<description>CO level in ppm</description>
+		<category>Gas</category>
+		<tags>
+			<tag>Measurement</tag>
+			<tag>CO</tag>
+		</tags>
+		<state pattern="%.1f %unit%" readOnly="true"/>
+	</channel-type>
+
+	<channel-type id="volatileOrganicCompounds">
+		<item-type>Number:Dimensionless</item-type>
+		<label>VOC</label>
+		<description>Volatile organic compounds level in ppm/</description>
+		<category>Gas</category>
+		<tags>
+			<tag>Measurement</tag>
+			<tag>Gas</tag>
+		</tags>
+		<state pattern="%.2f %unit%" readOnly="true"/>
+	</channel-type>
+
+	<channel-type id="volatileOrganicCompoundsId">
+		<item-type>String</item-type>
+		<label>VOC ID</label>
+		<description>Volatile organic compounds identification</description>
+		<category>Gas</category>
+		<tags>
+			<tag>Measurement</tag>
+			<tag>Gas</tag>
+		</tags>
+		<state pattern="%s" readOnly="true"/>
+	</channel-type>
+
+	<channel-type id="totalVolatileOrganicCompounds">
+		<item-type>Number:Dimensionless</item-type>
+		<label>TVOC</label>
+		<description>Total volatile organic compounds level in ppb/</description>
+		<category>Gas</category>
+		<tags>
+			<tag>Measurement</tag>
+			<tag>Gas</tag>
+		</tags>
+		<state pattern="%.2f %unit%" readOnly="true"/>
+	</channel-type>
+
 	<channel-type id="setPoint">
 		<item-type>Number</item-type>
 		<label>Set Point</label>