public/openhab-addons
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[gpio] Added instructions in case raspi-config is not available (#9899)

Browse Source 
Signed-off-by: Seb Boulet <SebBoulet@users.noreply.github.com>
This commit is contained in:
Seb Boulet 2021-02-17 10:47:42 +00:00 committed by GitHub
parent fbf55d5886
commit cb9a118581
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 14 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
bundles/org.openhab.binding.gpio/README.md
View File

@ -22,12 +22,25 @@ sudo raspi-config
-> Interfacing Options --> Remote GPIO --> YES --> OK --> Finish -> Interfacing Options --> Remote GPIO --> YES --> OK --> Finish
Note: if you are setting this up on a Raspberry Pi without `raspi-config` you can create the service config file manually:
```
sudo mkdir -p /etc/systemd/system/pigpiod.service.d/
sudo nano /etc/systemd/system/pigpiod.service.d/public.conf
```
[Service]
ExecStart=
ExecStart=/usr/bin/pigpiod
```
sudo systemctl daemon-reload
```
Now that Remote GPIO is enabled, get the daemon going:
``` ```
sudo systemctl enable pigpiod sudo systemctl enable pigpiod
sudo systemctl start pigpiod sudo systemctl start pigpiod
``` ```
Set `host` to the address of the pi and the `port` to the port of pigpio (default: 8888). In openHAB, set `host` to the address of the pi and the `port` to the port of pigpio (default: 8888).
## Channels ## Channels