public/openhab-addons
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[gpio] Added parameter for pull up/down resistor and other improvements (#10782)

Browse Source
This commit is contained in:
Martin Dagarin
2021-06-07 20:57:08 +02:00
committed by GitHub
parent c97f2ac2fa
commit d9841ef0de
5 changed files with 26 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
bundles/org.openhab.binding.gpio/README.md
View File

@@ -34,7 +34,7 @@ sudo nano /etc/systemd/system/pigpiod.service.d/public.conf
```
sudo systemctl daemon-reload
```
Now that Remote GPIO is enabled, get the daemon going:
Now that Remote GPIO is enabled, get the daemon going (even if installed with apt-get):
```
sudo systemctl enable pigpiod
sudo systemctl start pigpiod
@@ -42,6 +42,8 @@ sudo systemctl start pigpiod
In openHAB, set `host` to the address of the pi and the `port` to the port of pigpio (default: 8888).
Note: If you are running Pigpio on same host as openHAB, then set host to **::1**.
## Channels
### Pigpio Remote
@@ -56,6 +58,7 @@ In openHAB, set `host` to the address of the pi and the `port` to the port of pi
Set the number of the pin in `gpioId`.
If you want to invert the value, set `invert` to true.
To prevent incorrect change events, you can adjust the `debouncingTime`.
Using `pullupdown` you can enable pull up or pull down resistor (0 = Off, 1 = Pull Down, 2 = Pull Up).
### GPIO digital output channel
@@ -78,7 +81,7 @@ Thing gpio:pigpio-remote:sample-pi-1 "Sample-Pi 1" [host="192.168.2.36", port=88
Thing gpio:pigpio-remote:sample-pi-2 "Sample-Pi 2" [host="192.168.2.37", port=8888] {
Channels:
Type pigpio-digital-input : sample-input-3 [ gpioId=16, debouncingTime=20]
Type pigpio-digital-input : sample-input-4 [ gpioId=17, invert=true, debouncingTime=5]
Type pigpio-digital-input : sample-input-4 [ gpioId=17, invert=true, debouncingTime=5, pullupdown=2]
Type pigpio-digital-output : sample-output-2 [ gpioId=4, invert=true]
}
```