[All addons] Review all readme.md files for V3 changes. (#9439)
Signed-off-by: Matthew Skinner <matt@pcmus.com> * modbus.e3dc: newlines added and remove broken anchor. Signed-off-by: Matthew Skinner <matt@pcmus.com> * modbus.stie..:remove multiple newlines. Signed-off-by: Matthew Skinner <matt@pcmus.com> * modbus.sunspec: remove multiple newlines. Signed-off-by: Matthew Skinner <matt@pcmus.com> * Nanoleaf: remove PaperUI. Signed-off-by: Matthew Skinner <matt@pcmus.com> * Neato: Remove openhab 2 Signed-off-by: Matthew Skinner <matt@pcmus.com> * Nibe: remove PaperUI. Signed-off-by: Matthew Skinner <matt@pcmus.com> * NibeUplink: Remove PaperUI Signed-off-by: Matthew Skinner <matt@pcmus.com> * Niko: Remove PaperUI Signed-off-by: Matthew Skinner <matt@pcmus.com> * Nuki: Remove Paper UI Signed-off-by: Matthew Skinner <matt@pcmus.com> * OneWire: Remove multiple newlines. Signed-off-by: Matthew Skinner <matt@pcmus.com> * OpenUV: remove paperui Signed-off-by: Matthew Skinner <matt@pcmus.com> * OpenWebNet: Remove paperUI Signed-off-by: Matthew Skinner <matt@pcmus.com> * Pentair: remove openhab2 path Signed-off-by: Matthew Skinner <matt@pcmus.com> * Fix typo Signed-off-by: Matthew Skinner <matt@pcmus.com> * RFXCOM: remove PaperUI Signed-off-by: Matthew Skinner <matt@pcmus.com> * Russound: Remove PaperUI. Signed-off-by: Matthew Skinner <matt@pcmus.com> * Samsung: remove paperui Signed-off-by: Matthew Skinner <matt@pcmus.com> * Siemens: remove paperui Signed-off-by: Matthew Skinner <matt@pcmus.com> * Samsung Smartthings: remove openhab 2 mention. Signed-off-by: Matthew Skinner <matt@pcmus.com> * Somfy myLink: remove paperUI Signed-off-by: Matthew Skinner <matt@pcmus.com> * Somfy Tahoma: remove paperUI Signed-off-by: Matthew Skinner <matt@pcmus.com> * Sonos: Remove paperui ref Signed-off-by: Matthew Skinner <matt@pcmus.com> * Spotify: remove paperui Signed-off-by: Matthew Skinner <matt@pcmus.com> * Tankerkönig: remove java8 and paperUI references. Signed-off-by: Matthew Skinner <matt@pcmus.com> * Tellstick: remove paperui Signed-off-by: Matthew Skinner <matt@pcmus.com> * Tibber: remove paperui Signed-off-by: Matthew Skinner <matt@pcmus.com> * Velbus: remove paperUI Signed-off-by: Matthew Skinner <matt@pcmus.com> * Vitotronic: remove paperui Signed-off-by: Matthew Skinner <matt@pcmus.com> * VolvoOnCall: remove paperUI Signed-off-by: Matthew Skinner <matt@pcmus.com> * WiFi LED: remove paperui Signed-off-by: Matthew Skinner <matt@pcmus.com> * WlanThermo: remove paperUI Signed-off-by: Matthew Skinner <matt@pcmus.com> * XmlTV: remove openhab2 path Signed-off-by: Matthew Skinner <matt@pcmus.com> * Z-Way: Remove paperUI Signed-off-by: Matthew Skinner <matt@pcmus.com> * Update bundles/org.openhab.binding.nanoleaf/README.md Signed-off-by: Matthew Skinner <matt@pcmus.com> Co-authored-by: Fabian Wolter <github@fabian-wolter.de> * MagentaTV: Fix typo Signed-off-by: Matthew Skinner <matt@pcmus.com> * MagentaTV: Change to userId Signed-off-by: Matthew Skinner <matt@pcmus.com> Co-authored-by: Fabian Wolter <github@fabian-wolter.de>
This commit is contained in:
Matthew Skinner
GitHub
@@ -25,11 +25,11 @@ The binding provides device discovery, sending keys for the remote and also rece
|
||||
|
||||
## Auto Discovery
|
||||
|
||||
UPnP will be used to discover receivers on the local network and discover the nessesary parameters.
|
||||
UPnP will be used to discover receivers on the local network and discover the necessary parameters.
|
||||
The receiver needs to be powered on to get discovered.
|
||||
|
||||
Once the receiver is discovered it can be added from the Inbox.
|
||||
Make sure to set the U in the Thing configuration after adding the new thing, see section Thing Configuration.
|
||||
Make sure to set `userId` in the Thing configuration after adding the new thing, see section Thing Configuration.
|
||||
|
||||
Note:
|
||||
The binding uses the network settings in openHAB's system configuration to determine the local IP address.
|
||||
@@ -126,11 +126,12 @@ For security reasons the credentials are automatically deleted from the thing co
|
||||
|
||||
Please note:
|
||||
|
||||
- POWER is a toggle button, not an on/off switch. The binding tries to detect and maintain the correct state, but due to device limitations this is not always possible. Make sure the receiver's and binding's state are in sync when OH is restarted (binidng assume state OFF).
|
||||
- POWER is a toggle button, not an on/off switch.
|
||||
The binding tries to detect and maintain the correct state, but due to device limitations this is not always possible.
|
||||
Make sure the receiver's and binding's state are in sync when OH is restarted (binding assumes state is OFF).
|
||||
- Channels receiving event information get updated when changing the channel or playing a video.
|
||||
There is no way to read the current status, therefore they don't get initialized on startup nor being updated in real-time.
|
||||
|
||||
|
||||
The player channel supports the following actions:
|
||||
|
||||
|Channel |Command |Description |
|
||||
@@ -193,7 +194,6 @@ The player channel supports the following actions:
|
||||
In addition you could send any key code in the 0xHHHH format., refer to
|
||||
[Key Codes for Magenta/Huawei Media Receiver](http://support.huawei.com/hedex/pages/DOC1100366313CEH0713H/01/DOC1100366313CEH0713H/01/resources/dsv_hdx_idp/DSV/en/en-us_topic_0094619112.html)
|
||||
|
||||
|
||||
## Full Configuraton Example
|
||||
|
||||
### magentatv.things
|
||||
@@ -328,4 +328,3 @@ to switch it ON and
|
||||
to switch it off.
|
||||
|
||||
After an openHAB restart you need to make sure that OH and receiver are in sync, because the binding can't read the power status at startup.
|
||||
|
||||
|
||||
Reference in New Issue
Block a user