[hdpowerview] Add shade identify command (#12175)
* Add shade identify command. Fixes #12174 Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
This commit is contained in:
@@ -92,7 +92,7 @@ All of these channels appear in the binding, but only those which have a physica
|
||||
| position | Rollershutter | The vertical position of the shade's rail -- see [next chapter](#Roller-Shutter-Up/Down-Position-vs.-Open/Close-State). Up/Down commands will move the rail completely up or completely down. Percentage commands will move the rail to an intermediate position. Stop commands will halt any current movement of the rail. |
|
||||
| secondary | Rollershutter | The vertical position of the secondary rail (if any). Its function is similar to the `position` channel above -- but see [next chapter](#Roller-Shutter-Up/Down-Position-vs.-Open/Close-State). |
|
||||
| vane | Dimmer | The degree of opening of the slats or vanes. Setting this to a non-zero value will first move the shade `position` fully down, since the slats or vanes can only have a defined state if the shade is in its down position -- see [Interdependency between Channel positions](#Interdependency-between-Channel-positions). |
|
||||
| command | String | Send a command to the shade. Valid values are: `CALIBRATE` |
|
||||
| command | String | Send a command to the shade. Valid values are: `CALIBRATE`, `IDENTIFY` |
|
||||
| lowBattery | Switch | Indicates ON when the battery level of the shade is low, as determined by the hub's internal rules. |
|
||||
| batteryLevel | Number | Battery level (10% = low, 50% = medium, 100% = high)
|
||||
| batteryVoltage | Number:ElectricPotential | Battery voltage reported by the shade. |
|
||||
|
||||
Reference in New Issue
Block a user