5533643a3a
* Prevent possible NPE Signed-off-by: Martin Herbst <develop@mherbst.de> * Spotless Signed-off-by: Martin Herbst <develop@mherbst.de> * Fixes missing unit information (especially for HmIP devices) For some HmIP devices the "valueunit" attribute is empty and thus no default unit type could be derived. Using the data point name solves this problem (at least for the relevant data points). Fixes #10533 Signed-off-by: Martin Herbst <develop@mherbst.de> * Condition result was wrong because of missing brackets Signed-off-by: Martin Herbst <develop@mherbst.de> * Regenerated and reorganized descriptions Signed-off-by: Martin Herbst <develop@mherbst.de> * Encoding changed to UTF-8 and some smaller text corrections Signed-off-by: Martin Herbst <develop@mherbst.de> * Use default value as maximum if is greater than received max value For some devices the data point definition retrieved from the CCU contains default values that are higher than the maximum value. In order to allow the configuration of these config options the allowed maximum value needs to be set to the default value. Fixes #10552 Signed-off-by: Martin Herbst <develop@mherbst.de>
1618 lines
81 KiB
Properties
1618 lines
81 KiB
Properties
# -------------- generated descriptions Sun Apr 25 19:44:22 CEST 2021 --------------
|
|
# DON'T CHANGE THIS FILE!
|
|
|
|
263_130=Wireless Switch Actuator 1-channel, flush-mount
|
|
263_131=Wireless Switch Actuator 1-channel, flush-mount
|
|
263_132=Wireless Dimming Actuator 1-channel leading edge, ceiling void mount
|
|
263_133=Wireless Dimming Actuator 1-channel, trailing edge, flush-mount
|
|
263_134=Wireless Dimming Actuator 2-channel, trailing edge, surface-mount
|
|
263_135=Wireless Push-button 2-channel in 55mm frame
|
|
263_144=Wireless Switch interface 3-channel, flush-mount
|
|
263_145=Wireless Push-button interface 4-channel, flush-mount
|
|
263_146=Wireless Blind Actuator 1-channel, flush-mount
|
|
263_147=Wireless Shutter Actuator 1-channel, surface-mount
|
|
263_149_/_263_150=engl Schüco WCS-TipTronic-Platine
|
|
263_155=Wireless Display Push-button 2-channel, surface-mount
|
|
263_157=Wireless Temperature Sensor - indoor
|
|
263_158=Wireless Temperature/Humidity Sensor, outdoor
|
|
263_160=Wireless Sensor for Carbon Dioxide
|
|
263_162=Wireless Motion Detector - indoor
|
|
263_167=Wireless Smoke Detector
|
|
263_167_Gruppe=Wireless Smoke Detector (Group)
|
|
ALPHA-IP-RBG=Room Control Unit Display
|
|
ALPHA-IP-RBGa=Room Control Unit Analogue
|
|
BDT=Homematic IP Dimming Actuator for brand switch systems, flush-mount
|
|
BRC-H=Remote Control DORMA, 4-channel
|
|
BSM=Homematic IP Switch Actuator with power measurement
|
|
DEVICE=Unknown device
|
|
FDT=Homematic IP Dimming Actuator, flush-mount
|
|
FSM=Homematic IP Switch Actuator with power measurement, flush-mount
|
|
FSM16=Homematic IP Switch Actuator with power measurement, flush-mount
|
|
HM-CC-RT-DN=Wireless Heating Thermostat
|
|
HM-CC-SCD=Wireless Sensor for Carbon Dioxide
|
|
HM-CC-TC=Wireless Wall Thermostat
|
|
HM-CC-VD=Wireless Valve Drive
|
|
HM-CC-VG-1=Group heating control
|
|
HM-CCU-1=Homematic Central Control Unit
|
|
HM-DW-WM=Wireless Dimming Actuator 2-channel PWM LED
|
|
HM-Dis-EP-WM55=Display Status Monitor with E-Paper-Display
|
|
HM-Dis-TD-T=Wireless Status Monitor
|
|
HM-Dis-WM55=Display Status Monitor
|
|
HM-EM-CCM=Metering Sensor camera module
|
|
HM-EM-CMM=Metering Sensor management module
|
|
HM-ES-PMSw1-DR=Wireless Switch Actuator with power measurement, DIN rail mount
|
|
HM-ES-PMSw1-Pl=Wireless Switch Actuator with power measurement
|
|
HM-ES-PMSw1-Pl-DN-R1=Wireless Switch Actuator with power measurement
|
|
HM-ES-PMSw1-Pl-DN-R2=Wireless Switch Actuator with power measurement
|
|
HM-ES-PMSw1-Pl-DN-R3=Wireless Switch Actuator with power measurement
|
|
HM-ES-PMSw1-Pl-DN-R4=Wireless Switch Actuator with power measurement
|
|
HM-ES-PMSw1-Pl-DN-R5=Wireless Switch Actuator with power measurement
|
|
HM-ES-PMSw1-SM=Wireless Switch Actuator with power measurement
|
|
HM-ES-TX-WM=Wireless Transmitter for Energy Meter Sensor
|
|
HM-LC-AO-SM=Wireless 0-10V Actuator
|
|
HM-LC-Bl1-FM=Wireless Blind Actuator 1-channel, flush-mount
|
|
HM-LC-Bl1-PB-FM=Wireless Blind Actuator 1-channel, flush-mount with push-button
|
|
HM-LC-Bl1-SM=Wireless Blind Actuator 1-channel, surface-mount
|
|
HM-LC-Bl1PBU-FM=Wireless Shutter Actuator 1-channel for brand switch systems, flush-mount
|
|
HM-LC-DDC1-PCB=Wireless Receiver 1-channel
|
|
HM-LC-DW-WM=Wireless controller for dual white LEDs
|
|
HM-LC-Dim1L-CV=Wireless Dimming Actuator 1-channel leading edge, ceiling void mount
|
|
HM-LC-Dim1L-Pl=Wireless Dimming Actuator 1-channel, plug adapter, phase control
|
|
HM-LC-Dim1L-Pl-2=Wireless Dimming Actuator 1-channel, plug adapter, phase control
|
|
HM-LC-Dim1L-Pl-3=Wireless Dimming Actuator 1-channel, plug adapter, phase control
|
|
HM-LC-Dim1PWM-CV=Wireless Dimming Actuator 1-channel PWM LED, ceiling-void mount
|
|
HM-LC-Dim1T-CV=Wireless Dimming Actuator 1-channel, trailing edge, ceiling void mount
|
|
HM-LC-Dim1T-DR=Wireless Dimming Actuator 1-channel, trailing edge, DIN rail mount
|
|
HM-LC-Dim1T-FM=Wireless Dimming Actuator 1-channel, trailing edge, flush-mount
|
|
HM-LC-Dim1T-Pl=Wireless Dimming Actuator 1-channel, plug adapter, trailing edge
|
|
HM-LC-Dim1T-Pl-2=Wireless Dimming Actuator 1-channel, plug adapter, trailing edge
|
|
HM-LC-Dim1T-Pl-3=Wireless Dimming Actuator 1-channel, plug adapter, trailing edge
|
|
HM-LC-Dim1TPBU-FM=Wireless Dimming Actuator 1-channel, trailing edge, flush-mount
|
|
HM-LC-Dim1TPBU-FM-2=Wireless Dimming Actuator 1-channel, trailing edge, flush-mount
|
|
HM-LC-Dim2L-SM=Wireless Dimming Actuator 2-channel, leading edge, surface-mount
|
|
HM-LC-Dim2T-SM=Wireless Dimming Actuator 2-channel, trailing edge, surface-mount
|
|
HM-LC-Ja1PBU-FM=Wireless Blind Actuator 1-channel, flush-mount with push-button
|
|
HM-LC-Sw1-Ba-PCB=Wireless Switch Actuator 1-channel, PCB, battery
|
|
HM-LC-Sw1-DR=Wireless Switch Actuator 1-channel, DIN rail mount
|
|
HM-LC-Sw1-FM=Wireless Switch Actuator 1-channel, flush-mount
|
|
HM-LC-Sw1-PB-FM=Wireless Switch Actuator 1-channel, flush-mount
|
|
HM-LC-Sw1-PCB=Wireless Switch Actuator 1-channel, PCB
|
|
HM-LC-Sw1-Pl=Wireless Switch Actuator 1-channel, socket adapter
|
|
HM-LC-Sw1-Pl-3=Wireless Switch Actuator 1-channel, socket adapter
|
|
HM-LC-Sw1-Pl-CT-R1=Wireless Switch Actuator 1-channel with clamp terminal
|
|
HM-LC-Sw1-Pl-DN-R1=Wireless Switch Actuator 1-channel, socket adapter
|
|
HM-LC-Sw1-Pl-DN-R2=Wireless Switch Actuator 1-channel, socket adapter
|
|
HM-LC-Sw1-Pl-DN-R3=Wireless Switch Actuator 1-channel, socket adapter
|
|
HM-LC-Sw1-Pl-DN-R4=Wireless Switch Actuator 1-channel, socket adapter
|
|
HM-LC-Sw1-Pl-DN-R5=Wireless Switch Actuator 1-channel, socket adapter
|
|
HM-LC-Sw1-Pl-OM54=Wireless Switch, 1-channel
|
|
HM-LC-Sw1-SM=Wireless Switch Actuator 1-channel, surface-mount
|
|
HM-LC-Sw1-SM-ATmega168=Wireless Switch Actuator 1-channel, surface-mount
|
|
HM-LC-Sw1PBU-FM=Wireless Switch Actuator 1-channel for brand switch systems, flush-mount
|
|
HM-LC-Sw2-DR=Wireless Switch Actuator 2-channel, DIN rail mount
|
|
HM-LC-Sw2-FM=Wireless Switch Actuator 2-channel, flush-mount
|
|
HM-LC-Sw2-PB-FM=Wireless Switch Actuator 2-channel, flush-mount
|
|
HM-LC-Sw2PBU-FM=Wireless Switch Actuator 2-channel, flush-mount
|
|
HM-LC-Sw4-Ba-PCB=Wireless Switch Actuator 4-channel, PCB, battery
|
|
HM-LC-Sw4-DR=Wireless Switch Actuator 4-channel, DIN rail mount
|
|
HM-LC-Sw4-PCB=Wireless Switch Actuator 4-channel, PCB
|
|
HM-LC-Sw4-SM=Wireless Switch Actuator 4-channel, surface-mount
|
|
HM-LC-Sw4-SM-ATmega168=Wireless Switch Actuator 4-channel, surface-mount
|
|
HM-LC-Sw4-WM=Wireless Switch Actuator 4-channel, wall-mount
|
|
HM-MOD-EM-8=Wireless Transmitter 8-channel, PCB, battery
|
|
HM-MOD-EM-8Bit=Wireless Transmitter, 8-Bit
|
|
HM-MOD-Re-8=Wireless Switch Actuator 8-channel, PCB, battery
|
|
HM-OU-CF-Pl=Wireless Door Chime with light flash
|
|
HM-OU-CFM-Pl=MP3 Wireless Chime with light flash
|
|
HM-OU-CFM-TW=MP3 Wireless Chime with light flash, battery
|
|
HM-OU-CM-PCB=Wireless chime module mp3 with memory
|
|
HM-OU-LED16=Wireless Status Monitor, LED16
|
|
HM-PB-2-FM=Wireless Push-button 2-channel
|
|
HM-PB-2-WM=Wireless Push-button 2-channel
|
|
HM-PB-2-WM55=Wireless Push-button 2-channel in 55mm frame
|
|
HM-PB-4-WM=Wireless Push-button 4-channel
|
|
HM-PB-4Dis-WM=Wireless Display Push-button 2-channel, surface-mount
|
|
HM-PB-4Dis-WM-2=Wireless Display Push-button 2-channel, surface-mount
|
|
HM-PBI-4-FM=Wireless Push-button interface 4-channel, flush-mount
|
|
HM-RC-12=Remote Control 12 buttons
|
|
HM-RC-12-B=Remote Control 12 buttons, black
|
|
HM-RC-19=Remote Control 19 buttons
|
|
HM-RC-19-B=Remote Control 19 buttons
|
|
HM-RC-19-SW=Remote Control 19 buttons
|
|
HM-RC-2-PBU-FM=Wireless Transmitter 2-channel for brand switch systems, flush-mount
|
|
HM-RC-4=Remote Control 4 buttons
|
|
HM-RC-4-B=Remote Control 4 buttons
|
|
HM-RC-8=Remote Control 8 buttons
|
|
HM-RC-Dis-H-x-EU=Remote Control with display
|
|
HM-RC-Key3=Wireless Remote Control for KeyMatic
|
|
HM-RC-Key3-B=Wireless Remote Control for KeyMatic
|
|
HM-RC-P1=Wireless Panic Hand Transmitter
|
|
HM-RC-Sec3=Wireless Remote Control for the alarm function
|
|
HM-RC-Sec3-B=Wireless Remote Control for the alarm function
|
|
HM-RCV-50=Virtual remote control (wireless)
|
|
HM-SCI-3-FM=Wireless Shutter Contact Interface 3-channel, flush-mount
|
|
HM-Sec-Key=KeyMatic
|
|
HM-Sec-Key-O=KeyMatic
|
|
HM-Sec-Key-S=KeyMatic
|
|
HM-Sec-MDIR=Wireless Motion Detector - indoor
|
|
HM-Sec-RHS=Wireless Window Rotary Handle Sensor
|
|
HM-Sec-SC=Wireless Door/Window Contact
|
|
HM-Sec-SC-2=Wireless Door/Window Contact
|
|
HM-Sec-SCo=Wireless Door/Window Contact optical
|
|
HM-Sec-SD=Wireless Smoke Detector
|
|
HM-Sec-SD-Team=Wireless Smoke Detector (Group)
|
|
HM-Sec-SFA-SM=Wireless Siren/Flash Actuator
|
|
HM-Sec-Sir-WM=Wireless Indoor Siren
|
|
HM-Sec-TiS=Wireless Tilt Sensor
|
|
HM-Sec-WDS=Wireless Water Detection Sensor
|
|
HM-Sec-WDS-2=Wireless Water Detection Sensor
|
|
HM-Sec-Win=WinMatic
|
|
HM-Sen-DB-PCB=Wireless Doorbell Sensor
|
|
HM-Sen-EP=Wireless sensor for electrical pulses
|
|
HM-Sen-LI-O=Wireless Light Intensity Sensor, outdoor
|
|
HM-Sen-MDIR-O=Wireless Motion Detector, outdoor
|
|
HM-Sen-MDIR-SM=Wireless Motion Detector
|
|
HM-Sen-MDIR-WM55=Wireless Motion Detector with button pair
|
|
HM-Sen-RD-O=Rain sensor
|
|
HM-Sen-Wa-Od=Wireless Capacitive Filling Level Sensor
|
|
HM-SwI-3-FM=Wireless Switch interface 3-channel, flush-mount
|
|
HM-Sys-sRP-Pl=Wireless Repeater, socket adapter
|
|
HM-TC-IT-WM-W-EU=Wireless Wall Thermostat
|
|
HM-WDC7000=Wireless Weather Data Center WDC 7000
|
|
HM-WDS10-TH-O=Wireless Temperature/Humidity Sensor, outdoor
|
|
HM-WDS100-C6-O=Wireless Weather Data Sensor OC 3
|
|
HM-WDS30-OT2-SM=Wireless Temperature Difference Sensor
|
|
HM-WDS30-T-O=Wireless Temperature Sensor, outdoor
|
|
HM-WDS40-TH-I=Wireless Temperature Sensor - indoor
|
|
HM-WS550-US=Wireless Weather Data Center USA
|
|
HM-WS550ST-IO=Wireless Temperature Sensor, outdoor
|
|
HM-WS550STH-I=Wireless Temperature Sensor - indoor
|
|
HM-WS550STH-O=Wireless Temperature/Humidity Sensor, outdoor
|
|
HMW-IO-12-FM=Wired RS485 I/O Module 12-channel, flush-mount
|
|
HMW-IO-12-Sw14-DR=Wired RS485 I/O Module with 12 inputs, 14 outputs, DIN rail mount
|
|
HMW-IO-12-Sw7-DR=Wired RS485 I/O Module with 12 inputs, 7 outputs, DIN rail mount
|
|
HMW-IO-4-FM=Wired RS485 I/O Module 4-channel, flush-mount
|
|
HMW-LC-Bl1-DR=Wired RS485 Blind Actuator 1-channel, DIN rail mount
|
|
HMW-LC-Dim1L-DR=Wired RS485 Dimming Actuator 1-channel, leading edge, DIN rail mount
|
|
HMW-LC-Sw2-DR=Wired RS485 Switch Actuator 2-channel, DIN rail mount
|
|
HMW-RCV-50=Virtual remote control (wired)
|
|
HMW-Sec-TR-FM=Wired RS 485 Transponder Reader, flush-mount
|
|
HMW-Sen-SC-12-DR=Wired RS485 Shutter Contact 12-channel, DIN rail mount
|
|
HMW-Sen-SC-12-FM=Wired RS485 Shutter Contact 12-channel, flush-mount
|
|
HMW-Sys-PS7-DR=Wired RS485 Power Supply 7 VA, DIN rail mount
|
|
HMW-WSE-SM=Wired RS485 Light Sensor, surface mount
|
|
HMW-WSTH-SM=Wired RS485 Temperature/Humidity Sensor
|
|
HmIP-ASIR=Homematic IP Alarm Siren
|
|
HmIP-ASIR-O=Homematic IP Alarm Siren - outdoor
|
|
HmIP-BBL=Homematic IP Blinds Actuator for brand switches
|
|
HmIP-BRC2=Homematic IP Remote Control for brand switches - 2 channels
|
|
HmIP-BROLL=Homematic IP Blind Actuator for brand switch systems, flush-mount
|
|
HmIP-BSL=Homematic IP Switch Actuator with Signal Lamp - for brand switches
|
|
HmIP-CCU3=Homematic IP Central Control Unit CCU3
|
|
HmIP-DBB=Homematic IP Doorbell Button
|
|
HmIP-DLD=Homematic IP Door Lock Drive
|
|
HmIP-DRBLI4=Homematic IP Blind and Shutter Actuator for DIN rail mount - 4 channels
|
|
HmIP-DRDI3=Homematic IP Dimming Actuator for DIN rail mount - 3 channels
|
|
HmIP-DRS4=Homematic IP Switch Actuator for DIN rail mount - 4-fach
|
|
HmIP-DRSI1=Homematic IP Switch Actuator for DIN rail mount - 1 channel
|
|
HmIP-DRSI4=Homematic IP Switch Actuator for DIN rail mount - 4 channels
|
|
HmIP-DSD-PCB=Homematic IP Doorbell Sensor
|
|
HmIP-FAL230-C10=Homematic IP Floor Heating Actuator - 10 channels 230 V
|
|
HmIP-FAL230-C6=Homematic IP Floor Heating Actuator - 6 channels 230 V
|
|
HmIP-FAL24-C10=Homematic IP Floor Heating Actuator - 10 channels 24 V
|
|
HmIP-FAL24-C6=Homematic IP Floor Heating Actuator - 6 channels 24 V
|
|
HmIP-FALMOT-C12=Homematic IP Floor Heating Actuator - 12 channels, motorised
|
|
HmIP-FBL=Homematic IP Blinds Actuator - flush-mount
|
|
HmIP-FCI1=Homematic IP Contact Interface flush-mount - 1 channel
|
|
HmIP-FCI6=Homematic IP Contact Interface flush-mount - 6 channels
|
|
HmIP-FROLL=Homematic IP Blind Actuator, flush-mount
|
|
HmIP-FSI16=Homematic IP Switch Actuator with Push-button Input (16 A) - flush-mount
|
|
HmIP-HAP=LAN ROUTER
|
|
HmIP-KRCK=Homematic IP Key Ring Remote Control - access control
|
|
HmIP-MIO16-PCB=Homematic IP Multi IO Module Board - 4x4
|
|
HmIP-MOD-HO=Homematic IP Module for Hoermann drives
|
|
HmIP-MOD-OC8=Homematic IP Switch Actuator with OC-Output
|
|
HmIP-MOD-RC8=Homematic IP Module Board Transmitter - 8 channels
|
|
HmIP-MOD-TM=Homematic IP Tormatic Module
|
|
HmIP-MP3P=Homematic IP Combination Signalling Device MP3
|
|
HmIP-PCBS=Homematic IP Switch Circuit Board
|
|
HmIP-PCBS-BAT=Homematic IP Switch Circuit for battery operation
|
|
HmIP-PCBS2=Homematic IP Switch Circuit Board - 2 channels
|
|
HmIP-PMFS=Homematic IP Mains Failure Surveillance
|
|
HmIP-RCV-50=Virtual Remote Control
|
|
HmIP-SAM=Homematic IP Acceleration Sensor
|
|
HmIP-SCI=Homematic IP Contact Interface
|
|
HmIP-SCTH230=Homematic IP CO2 Sensor, 230 V
|
|
HmIP-SFD=Homematic IP Particulate Matter Sensor
|
|
HmIP-SLO=Homematic IP Light Sensor - outdoor
|
|
HmIP-SMI55=Homematic IP Motion Detector for 55mm frames - indoor
|
|
HmIP-SPDR=Homematic IP Passage Sensor with Direction Recognition
|
|
HmIP-SPI=Homematic IP Presence sensor - indoor
|
|
HmIP-SRD=Homematic IP Rain Sensor
|
|
HmIP-STE1-PCB=Homematic IP Temperature Sensor with external probe - 1 channels
|
|
HmIP-STE2-PCB=Homematic IP Temperature Sensor with external probes - 2 channels
|
|
HmIP-STHD=Homematic IP Temperature and Humidity Sensor with Display - indoor
|
|
HmIP-STHO=Homematic IP Temperature and Humidity Sensor - outdoor
|
|
HmIP-STV=Homematic IP Tilt and Vibration Sensor
|
|
HmIP-SWD=Homematic IP Water Sensor
|
|
HmIP-SWDM=Homematic IP Window / Door Contact with magnet
|
|
HmIP-SWDO=Homematic IP Window / Door Contact - optical
|
|
HmIP-SWDO-I=Homematic IP Window / Door Contact - invisible installation
|
|
HmIP-SWDO-PL=Homematic IP Window / Door Contact - optical, plus
|
|
HmIP-SWO-B=Homematic IP Weather Sensor - basic
|
|
HmIP-SWO-PL=Homematic IP Weather Sensor - plus
|
|
HmIP-SWO-PR=Homematic IP Weather Sensor - pro
|
|
HmIP-USBSM=Homematic IP Switch Actuator and Meter for USB
|
|
HmIP-WGC=Homematic IP Garage Door Controller
|
|
HmIP-WHS2=Homematic IP Switch Actuator for heating systems - 2 channels
|
|
HmIP-WRC2=Homematic IP Wall-mount Remote Control 2 buttons
|
|
HmIP-WRCC2=Homematic IP Wall-mount Remote Control - flat
|
|
HmIP-WRCD=Homematic IP Wall-mount Remote Control with status display
|
|
HmIP-WRCR=Homematic IP Rotary Button
|
|
HmIP-WTH=Homematic IP Wall Thermostat
|
|
HmIP-WTH-2=Homematic IP Wall Thermostat with Humidity Sensor
|
|
HmIP-WTH-B=Homematic IP Wall Thermostat - basic
|
|
HmIPW-BRC2=Homematic IP Wired Remote Control for brand switches - 2 channels
|
|
HmIPW-DRAP=Homematic IP Wired Access Point
|
|
HmIPW-DRBL4=Homematic IP Wired Blind and Shutter Actuator - 4 channels
|
|
HmIPW-DRD3=Homematic IP Wired Dimming Actuator - 3 channels
|
|
HmIPW-DRI16=Homematic IP Wired Input Module - 16 channels
|
|
HmIPW-DRI32=Homematic IP Wired Input Module - 32 channels
|
|
HmIPW-DRS4=Homematic IP Wired Switch Actuator - 4 channels
|
|
HmIPW-DRS8=Homematic IP Wired Switch Actuator - 8 channels
|
|
HmIPW-FAL230-C10=Homematic IP Wired Floor Heating Actuator - 10 channels, 230 V
|
|
HmIPW-FAL230-C6=Homematic IP Wired Floor Heating Actuator - 6 channels, 230 V
|
|
HmIPW-FAL24-C10=Homematic IP Wired Floor Heating Actuator - 10 channels, 24 V
|
|
HmIPW-FAL24-C6=Homematic IP Wired Floor Heating Actuator - 6 channels, 24 V
|
|
HmIPW-FIO6=Homematic IP Wired IO Module flush-mount - 6 channels
|
|
HmIPW-SMI55=Homematic IP Wired Motion Detector for 55mm frames - indoor
|
|
HmIPW-SPI=Homematic IP Wired Presence sensor - indoor
|
|
HmIPW-STH=Homematic IP Wired Temperature and Humidity Sensor - indoor
|
|
HmIPW-STHD=Homematic IP Wired Temperature and Humidity Sensor with display - indoor
|
|
HmIPW-WRC2=Homematic IP Wired Wall-mount Remote Control - 2 buttons
|
|
HmIPW-WRC6=Homematic IP Wired Wall-mount Remote Control - 6 buttons
|
|
HmIPW-WTH=Homematic IP Wired Wall Thermostat with Humidity Sensor
|
|
KRC4=Homematic IP Key Ring Remote Control - 4 buttons
|
|
KRCA=Homematic IP Key Ring Remote Control - 4 buttons Alarm
|
|
KS550=Wireless Weather Data Sensor 550
|
|
MIOB=Homematic IP Multi I/O-Box
|
|
OLIGO.smart.iq.HM=Wireless Dimming Actuator
|
|
PDT=Homematic IP Dimming Actuator
|
|
PS=Homematic IP Pluggable Switch
|
|
PSM=Homematic IP Pluggable Switch and Meter
|
|
PSM-CH=Homematic IP Pluggable Switch and Meter CH
|
|
PSM-IT=Homematic IP Pluggable Switch and Meter IT
|
|
PSM-PE=Homematic IP Pluggable Switch and Meter Pin Earth
|
|
PSM-UK=Homematic IP Pluggable Switch and Meter UK
|
|
RC8=Homematic IP Remote Contro, 8-channel
|
|
RPI-RF-MOD=CO-PROCESSOR
|
|
SMI=Homematic IP Motion Detector - indoor
|
|
SMO=Homematic IP Motion Detector, outdoor
|
|
SRH=Homematic IP Rotary Handle Sensor
|
|
STH=Homematic IP Temperature and Humidity Sensor - indoor
|
|
SWSD=Homematic IP Smoke Detector
|
|
TRV=Homematic IP Radiator Thermostat
|
|
TRV-B=Homematic IP Radiator Thermostat - basic
|
|
TRV-B-UK=Homematic IP Radiator Thermostat - basic UK
|
|
TRV-C=Homematic IP Radiator Thermostat - compact
|
|
TRV-E=Homematic IP Radiator Thermostat - Evo
|
|
TRV-UK=Homematic IP Radiator Thermostat UK
|
|
The END=
|
|
VIR-HUE-GTW=Philips-Hue Gateway
|
|
VIR-OL-GTW=OSRAM-Lightify Gateway
|
|
WRC6=Homematic IP Wall-mount Remote Control 6 buttons
|
|
WS888=Wireless Weather Data Center
|
|
WT=Homematic IP Wall Thermostat
|
|
ZEL_STG_RM_DWT_10=Wireless Display Push-button 2-channel, surface-mount
|
|
ZEL_STG_RM_FDK=Wireless Window Rotary Handle Sensor
|
|
ZEL_STG_RM_FEP_230V=Wireless Blind Actuator 1-channel, flush-mount
|
|
ZEL_STG_RM_FFK=Wireless Door/Window Contact
|
|
ZEL_STG_RM_FSA=Wireless Valve Drive
|
|
ZEL_STG_RM_FSS_UP3=Wireless Switch interface 3-channel, flush-mount
|
|
ZEL_STG_RM_FST_UP4=Wireless Push-button interface 4-channel, flush-mount
|
|
ZEL_STG_RM_FWT=Wireless Wall Thermostat
|
|
ZEL_STG_RM_FZS=Wireless Switch Actuator 1-channel, socket adapter
|
|
ZEL_STG_RM_FZS-2=Wireless Switch Actuator 1-channel, socket adapter
|
|
ZEL_STG_RM_HS_4=Remote Control 4 buttons
|
|
ZEL_STG_RM_WT_2=Wireless Push-button 2-channel in 55mm frame
|
|
atent=Remote Control DORMA
|
|
|
|
|
|
|
|
ACCELERATION_TRANSCEIVER=Vibration/Acceleration Sensor
|
|
ACCELERATION_TRANSCEIVER|MOTION|FALSE=no motion/horizontal
|
|
ACCELERATION_TRANSCEIVER|MOTION|TRUE=motion detected/tilted
|
|
ACCELERATION_TRANSCEIVER|MSG_FOR_POS_A=Message in position vertical
|
|
ACCELERATION_TRANSCEIVER|MSG_FOR_POS_A|CLOSED=closed
|
|
ACCELERATION_TRANSCEIVER|MSG_FOR_POS_A|NO_MSG=no message
|
|
ACCELERATION_TRANSCEIVER|MSG_FOR_POS_A|OPEN=open
|
|
ACCELERATION_TRANSCEIVER|MSG_FOR_POS_B=Message in position horizontal
|
|
ACCELERATION_TRANSCEIVER|MSG_FOR_POS_B|CLOSED=closed
|
|
ACCELERATION_TRANSCEIVER|MSG_FOR_POS_B|NO_MSG=no message
|
|
ACCELERATION_TRANSCEIVER|MSG_FOR_POS_B|OPEN=open
|
|
ACOUSTIC_ALARM_ACTIVE|FALSE=Acoustic signal deactivated
|
|
ACOUSTIC_ALARM_ACTIVE|TRUE=Acoustic signal activated
|
|
ACOUSTIC_ALARM_SELECTION|DELAYED_EXTERNALLY_ARMED=Absence mode delayed
|
|
ACOUSTIC_ALARM_SELECTION|DELAYED_INTERNALLY_ARMED=Presence mode delayed
|
|
ACOUSTIC_ALARM_SELECTION|DISABLE_ACOUSTIC_SIGNAL=No acoustic signal
|
|
ACOUSTIC_ALARM_SELECTION|DISARMED=Protection deactivated
|
|
ACOUSTIC_ALARM_SELECTION|ERROR=Error
|
|
ACOUSTIC_ALARM_SELECTION|EVENT=Alarm event
|
|
ACOUSTIC_ALARM_SELECTION|EXTERNALLY_ARMED=Absence mode
|
|
ACOUSTIC_ALARM_SELECTION|FREQUENCY_ALTERNATING_LOW_HIGH=Frequency low/high
|
|
ACOUSTIC_ALARM_SELECTION|FREQUENCY_ALTERNATING_LOW_MID_HIGH=Frequency low/average/high
|
|
ACOUSTIC_ALARM_SELECTION|FREQUENCY_FALLING=Frequency dropping
|
|
ACOUSTIC_ALARM_SELECTION|FREQUENCY_HIGHON_LONGOFF=Frequency high on, long off
|
|
ACOUSTIC_ALARM_SELECTION|FREQUENCY_HIGHON_OFF=Frequency high on/off
|
|
ACOUSTIC_ALARM_SELECTION|FREQUENCY_LOWON_LONGOFF_HIGHON_LONGOFF=Frequency low on - long off, high on - long off
|
|
ACOUSTIC_ALARM_SELECTION|FREQUENCY_LOWON_OFF_HIGHON_OFF=Frequency low on/off, high on/off
|
|
ACOUSTIC_ALARM_SELECTION|FREQUENCY_RISING=Frequency increasing
|
|
ACOUSTIC_ALARM_SELECTION|FREQUENCY_RISING_AND_FALLING=Frequency increasing/dropping
|
|
ACOUSTIC_ALARM_SELECTION|INTERNALLY_ARMED=Presence mode
|
|
ACOUSTIC_ALARM_SELECTION|LOW_BATTERY=Battery empty
|
|
ACOUSTIC_SIGNAL_VIRTUAL_RECEIVER=MP3-Player
|
|
ACTUAL_HUMIDITY=Relative humidity
|
|
ACTUAL_TEMPERATURE=Actual temperature
|
|
AIR_PRESSURE=Barometric pressure
|
|
AKKU|LEVEL=Charging status
|
|
AKKU|STATUS|CHARGE=Loading
|
|
AKKU|STATUS|DISCHARGE=Battery supplied
|
|
AKKU|STATUS|STATE_UNKNOWN=Status unknown
|
|
AKKU|STATUS|TRICKLE_CHARGE=Battery supplied
|
|
ALARMACTUATOR=Wireless Siren/Flash Actuator
|
|
ALARMACTUATOR|CYCLIC_INFO_MSG=cyclically status message
|
|
ALARMACTUATOR|ON_TIME=Switch-on time
|
|
ALARMACTUATOR|SABOTAGE_MSG=Sabotage message
|
|
ALARMACTUATOR|STATE|FALSE=Switching status: Off
|
|
ALARMACTUATOR|STATE|TRUE=Switching status: On
|
|
ALARMTIME_MAX=Max. alarm duration
|
|
ALARM_SWITCH_VIRTUAL_RECEIVER=Alarm siren
|
|
ALL_LEDS=Set all channels
|
|
ANALOG_INPUT=Analog
|
|
ANALOG_INPUT_TRANSMITTER|FILTER_SIZE=Number of measurements used for the average value of the input voltage.
|
|
ANALOG_INPUT_TRANSMITTER|VOLTAGE=Input voltage
|
|
ANALOG_OUTPUT=Analog
|
|
ANALOG_OUTPUT_TRANSCEIVER=Analogue output
|
|
ANALOG_OUTPUT_TRANSCEIVER|LEVEL=Output level
|
|
ARMING=Alarm siren (arm channel)
|
|
ARMING|ACOUSTIC_ALLSENS_ARM=Audible signal for arming in absence mode
|
|
ARMING|ACOUSTIC_ALLSENS_DELAY_ARM=Audible signal for delayed arming in absence mode
|
|
ARMING|ACOUSTIC_DISARM=Audible signal for deactivating alarm
|
|
ARMING|ACOUSTIC_EXTSENS_ARM=Audible signal for arming in presence mode
|
|
ARMING|ACOUSTIC_EXTSENS_DELAY_ARM=Audible signal for delayed arming in presence mode
|
|
ARMING|ACOUSTIC_MULTI_DELAY_ARM=Repeat audible signals for delayed arming
|
|
ARMING|OPTIC_ALLSENS_ARM=Visual signal for arming in absence mode
|
|
ARMING|OPTIC_ALLSENS_DELAY_ARM=Visual signal for delayed arming in absence mode
|
|
ARMING|OPTIC_DISARM=Visual signal for deactivating alarm
|
|
ARMING|OPTIC_EXTSENS_ARM=Visual signal for arming in presence mode
|
|
ARMING|OPTIC_EXTSENS_DELAY_ARM=Visual signal for delayed arming in presence mode
|
|
ARMING|OPTIC_MULTI_DELAY_ARM=Repeat visual signals for delayed arming
|
|
ARMSTATE|ALARM_BLOCKED=Alarm blocked
|
|
ARMSTATE|ALLSENS_ARMED=All sensors armed, (absence mode)
|
|
ARMSTATE|DISARMED=Protection deactivated
|
|
ARMSTATE|EXTSENS_ARMED=Outdoor sensors armed, (presence mode)
|
|
ARR_TIMEOUT=Time-out for bidirectional communication
|
|
ATC_ADAPTION_INTERVAL=Interval for temperature compensation of the sensors
|
|
ATC_MODE=Temperature compensation of the sensors
|
|
ATC_OFF=Off
|
|
ATC_ON=On
|
|
AUTO_MODE=Auto mode
|
|
AVERAGE_ILLUMINATION=Average level of brightness
|
|
BACKLIGHT_AT_CHARGE=Back light while device is in charging station
|
|
BACKLIGHT_AT_KEYSTROKE=Back light at button press
|
|
BACKLIGHT_AT_MOTION=Back light at movement/vibration
|
|
BACKLIGHT_ON_TIME=Lighting duration
|
|
BATTERY_POWERED=Battery operation
|
|
BATTERY_STATE=Battery status
|
|
BAT_DEFECT_LIMIT=Defect battery threshold
|
|
BLIND=Blind actuator
|
|
BLIND_TRANSMITTER|ACTIVITY_STATE|DOWN=Blind moves down
|
|
BLIND_TRANSMITTER|ACTIVITY_STATE|STABLE=Blind not moving
|
|
BLIND_TRANSMITTER|ACTIVITY_STATE|UNKNOWN=Blind activity unknown
|
|
BLIND_TRANSMITTER|ACTIVITY_STATE|UP=Blind moves up
|
|
BLIND_TRANSMITTER|LEVEL=Blind level
|
|
BLIND_TRANSMITTER|LEVEL_2=Slats position
|
|
BLIND_TRANSMITTER|PROCESS|NOT_STABLE=Blind moves
|
|
BLIND_TRANSMITTER|PROCESS|STABLE=Blind not moving
|
|
BLIND_VIRTUAL_RECEIVER=Blind actuator
|
|
BLIND_VIRTUAL_RECEIVER|ACTIVITY_STATE|DOWN=Blind moves down
|
|
BLIND_VIRTUAL_RECEIVER|ACTIVITY_STATE|STABLE=Blind not moving
|
|
BLIND_VIRTUAL_RECEIVER|ACTIVITY_STATE|UNKNOWN=Blind activity unknown
|
|
BLIND_VIRTUAL_RECEIVER|ACTIVITY_STATE|UP=Blind moves up
|
|
BLIND_VIRTUAL_RECEIVER|LEVEL=Blind level
|
|
BLIND_VIRTUAL_RECEIVER|LEVEL_2=Slats position
|
|
BLIND_VIRTUAL_RECEIVER|PROCESS|NOT_STABLE=Blind moves
|
|
BLIND_VIRTUAL_RECEIVER|PROCESS|STABLE=Blind not moving
|
|
BLIND_VIRTUAL_RECEIVER|STOP=Stop
|
|
BLIND|CHANGE_OVER_DELAY=Blind direction switch-over time
|
|
BLIND|LEVEL=Blind level
|
|
BLIND|REFERENCE_RUNNING_TIME_BOTTOM_TOP=Running time bottom to top
|
|
BLIND|REFERENCE_RUNNING_TIME_TOP_BOTTOM=Running time top to bottom
|
|
BLIND|REFERENCE_RUN_COUNTER=Number of runs until automatic calibration drive
|
|
BLIND|STOP=Stop
|
|
BLOCKING_PERIOD_UNIT=Time interval unit
|
|
BLOCKING_PERIOD_VALUE=Time interval value
|
|
BOOST_MODE=Boost function
|
|
BOOST_MODE|FALSE=Boost mode OFF
|
|
BOOST_MODE|TRUE=Boost mode ON
|
|
BOOST_STATE=Boost state
|
|
BOOST_TIME=Boost duration
|
|
BRIGHTNESS=Brightness
|
|
BRIGHTNESS_FILTER=Brightness filter
|
|
BRIGHTNESS_TRANSMITTER|FILTER_SIZE=Number of last brightness values used for calculation of brightness
|
|
BURST_RX=Wake on radio
|
|
BUTTON_LOCK=Keypad lock
|
|
BUTTON_RESPONSE_WITHOUT_BACKLIGHT=Immediate reaction to keypress without previous display backlight
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR=Wireless Capacitive Filling Level Sensor
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|CASE_DESIGN=Case design
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|CASE_DESIGN|HORIZONTAL_BARREL=horizontal cylinder
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|CASE_DESIGN|RECTANGLE=Cuboid
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|CASE_DESIGN|VERTICAL_BARREL=vertical cylinder
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|CASE_HIGH=Case hight
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|CASE_LENGTH=Case length
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|CASE_WIDTH=Case width
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|CONTROLTEXT_CALC_FILLINGLEVEL=Calculating filling level...
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|CONTROLTEXT_FILLINGLEVEL=Fill level
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|FILLING_LEVEL=Current fill level
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|FILL_LEVEL=Fill level at 100 %
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|FILL_LEVEL_LOWER_THRESHOLD=lower threshold in % for additional notification
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|FILL_LEVEL_UPPER_THRESHOLD=upper threshold in % for additional notification
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|MEA_LENGTH=Length of measuring cable
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|USE_CUSTOM=Custom calibration
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|WATER_LOWER_THRESHOLD_CH=lower threshold in % for additional notification
|
|
CAPACITIVE_FILLING_LEVEL_SENSOR|WATER_UPPER_THRESHOLD_CH=upper threshold in % for additional notification
|
|
CAPTURE_WITHIN_INTERVAL=Send detected motion within transmission interval:
|
|
CENTRAL_KEY|DBL_PRESS_TIME=Double-click time (keypad lock)
|
|
CENTRAL_KEY|LONG_PRESS_TIME=Minimum duration for long button press
|
|
CHANGE_OVER|FALSE=Operating mode change over inactive
|
|
CHANGE_OVER|TRUE=Operating mode change over active
|
|
CHARACTERISTIC_BASETYPE=Colour mixing behaviour
|
|
CHARACTERISTIC_COLOURASSIGNMENT=Colour allocation
|
|
CHARACTERISTIC_CROSSFADE=Crossfade
|
|
CHARACTERISTIC_DIM2HOT=Dim2Hot
|
|
CHARACTERISTIC_DIM2WARM=Dim2Warm
|
|
CHARACTERISTIC_HALF_CONSTANT=half/constant power
|
|
CHARACTERISTIC_LEVELLIMIT=Level limitation
|
|
CHARACTERISTIC_LINEAR=linear
|
|
CHARACTERISTIC_LINSQUARETYPE=Output characteristic
|
|
CHARACTERISTIC_LOW_IS_COLD=low is cold white
|
|
CHARACTERISTIC_LOW_IS_WARM=low is warm white
|
|
CHARACTERISTIC_MAXIMUM=maximum power
|
|
CHARACTERISTIC_SQUARE=square
|
|
CLIMATECONTROL_DEHUMIDIFIER_TRANSMITER=Sensor humidity
|
|
CLIMATECONTROL_FLOOR_DIRECT_TRANSMITTER|COOLING_DISABLE=Cooling in cooling mode
|
|
CLIMATECONTROL_FLOOR_DIRECT_TRANSMITTER|FLOOR_HEATING_MODE=Kind/type of system
|
|
CLIMATECONTROL_FLOOR_DIRECT_TRANSMITTER|HEATING_DISABLE=Heating in heating mode
|
|
CLIMATECONTROL_FLOOR_DIRECT_TRANSMITTER|HEATING_MODE_SELECTION=Kind of room
|
|
CLIMATECONTROL_FLOOR_DIRECT_TRANSMITTER|HEATING_VALVE_TYPE=Valve type
|
|
CLIMATECONTROL_FLOOR_DIRECT_TRANSMITTER|HUMIDITY_LIMIT_DISABLE=Humidity threshold value in cooling mode
|
|
CLIMATECONTROL_FLOOR_DIRECT_TRANSMITTER|HUMIDITY_LIMIT_VALUE=Humidity threshold
|
|
CLIMATECONTROL_FLOOR_DIRECT_TRANSMITTER|MINIMAL_FLOOR_TEMPERATURE=Minimum floor temperature
|
|
CLIMATECONTROL_FLOOR_PUMP_TRANSCEIVER=Floor heating/Pump control
|
|
CLIMATECONTROL_FLOOR_PUMP_TRANSCEIVER|EMERGENCY_OPERATION|FALSE=Connection with room control unit OK
|
|
CLIMATECONTROL_FLOOR_PUMP_TRANSCEIVER|EMERGENCY_OPERATION|TRUE=Connection failure with room control unit
|
|
CLIMATECONTROL_FLOOR_TRANSCEIVER=Floor heating
|
|
CLIMATECONTROL_FLOOR_TRANSCEIVER|EMERGENCY_OPERATION|FALSE=Connection with room control unit OK
|
|
CLIMATECONTROL_FLOOR_TRANSCEIVER|EMERGENCY_OPERATION|TRUE=Connection failure with room control unit
|
|
CLIMATECONTROL_FLOOR_TRANSMITTER=Room thermostat
|
|
CLIMATECONTROL_FLOOR_TRANSMITTER|EMERGENCY_OPERATION|FALSE=Connection with room control unit OK
|
|
CLIMATECONTROL_FLOOR_TRANSMITTER|EMERGENCY_OPERATION|TRUE=Connection failure with room control unit
|
|
CLIMATECONTROL_HEAT_DEMAND_BOILER_TRANSMITTER=Channel heating demand
|
|
CLIMATECONTROL_HEAT_DEMAND_PUMP_TRANSMITTER=Channel heating demand
|
|
CLIMATECONTROL_HEAT_DEMAND_TRANSMITER=Channel heating demand
|
|
CLIMATECONTROL_INPUT_RECEIVER=Channel heating/cooling
|
|
CLIMATECONTROL_INPUT_TRANSMITTER=Input channel
|
|
CLIMATECONTROL_RECEIVER=Radiator Thermostat (Receiver wall mounted thermostat)
|
|
CLIMATECONTROL_REGULATOR=Radiator thermostat
|
|
CLIMATECONTROL_REGULATOR|ADJUSTING_COMMAND=Adjustment command
|
|
CLIMATECONTROL_REGULATOR|ADJUSTING_DATA=Adjustment data
|
|
CLIMATECONTROL_REGULATOR|DECALCIFICATION_DAY=Routine descaling
|
|
CLIMATECONTROL_REGULATOR|DECALCIFICATION_HOUR=Routine descaling - hour
|
|
CLIMATECONTROL_REGULATOR|DECALCIFICATION_MINUTE=Routine descaling - minute
|
|
CLIMATECONTROL_REGULATOR|DISPLAY_TEMPERATUR_HUMIDITY_CHANGE=Display mode
|
|
CLIMATECONTROL_REGULATOR|DISPLAY_TEMPERATUR_HUMIDITY_CHANGE|TEMPERATUR_AND_HUMIDITY=Temperature and humidity
|
|
CLIMATECONTROL_REGULATOR|DISPLAY_TEMPERATUR_HUMIDITY_CHANGE|TEMPERATUR_ONLY=Temperature
|
|
CLIMATECONTROL_REGULATOR|DISPLAY_TEMPERATUR_INFORMATION=Information in display
|
|
CLIMATECONTROL_REGULATOR|DISPLAY_TEMPERATUR_INFORMATION|ACTUAL_VALUE=Current temperature
|
|
CLIMATECONTROL_REGULATOR|DISPLAY_TEMPERATUR_INFORMATION|SET_POINT=Setpoint temperature
|
|
CLIMATECONTROL_REGULATOR|DISPLAY_TEMPERATUR_UNIT=Temperature range
|
|
CLIMATECONTROL_REGULATOR|DISPLAY_TEMPERATUR_UNIT|CELSIUS=Degree Celsius
|
|
CLIMATECONTROL_REGULATOR|DISPLAY_TEMPERATUR_UNIT|FAHRENHEIT=Degree Fahrenheit
|
|
CLIMATECONTROL_REGULATOR|MODE_TEMPERATUR_REGULATOR=Temperature regulation mode
|
|
CLIMATECONTROL_REGULATOR|MODE_TEMPERATUR_REGULATOR|AUTO=automatic
|
|
CLIMATECONTROL_REGULATOR|MODE_TEMPERATUR_REGULATOR|CENTRAL=central
|
|
CLIMATECONTROL_REGULATOR|MODE_TEMPERATUR_REGULATOR|MANUAL=manually
|
|
CLIMATECONTROL_REGULATOR|MODE_TEMPERATUR_REGULATOR|PARTY=Party
|
|
CLIMATECONTROL_REGULATOR|MODE_TEMPERATUR_VALVE=Valve mode
|
|
CLIMATECONTROL_REGULATOR|MODE_TEMPERATUR_VALVE|AUTO=automatic
|
|
CLIMATECONTROL_REGULATOR|MODE_TEMPERATUR_VALVE|CLOSE_VALVE=closed
|
|
CLIMATECONTROL_REGULATOR|MODE_TEMPERATUR_VALVE|OPEN_VALVE=open
|
|
CLIMATECONTROL_REGULATOR|PARTY_END_TIME=Party/holiday end time
|
|
CLIMATECONTROL_REGULATOR|SETPOINT=Setpoint
|
|
CLIMATECONTROL_REGULATOR|SETPOINT|VENT_CLOSED=Close valve
|
|
CLIMATECONTROL_REGULATOR|SETPOINT|VENT_OPEN=Open valve
|
|
CLIMATECONTROL_REGULATOR|STATE|FALSE=Close valve
|
|
CLIMATECONTROL_REGULATOR|STATE|TRUE=Open valve
|
|
CLIMATECONTROL_REGULATOR|TEMPERATUR_COMFORT_VALUE=Comfort temperature:
|
|
CLIMATECONTROL_REGULATOR|TEMPERATUR_LOWERING_VALUE=Reduction temperature:
|
|
CLIMATECONTROL_REGULATOR|TEMPERATUR_PARTY_VALUE=Party/holiday temperature
|
|
CLIMATECONTROL_REGULATOR|TEMPERATUR_SET_POINT=Setpoint temperature
|
|
CLIMATECONTROL_REGULATOR|TEMPERATUR_WINDOW_OPEN_VALUE=Open-window temperature
|
|
CLIMATECONTROL_RT_RECEIVER=Radiator Thermostat (Receiver)
|
|
CLIMATECONTROL_RT_TRANSCEIVER=Radiator Thermostat (Sender)
|
|
CLIMATECONTROL_RT_TRANSCEIVER|FAULT_REPORTING|ADJUSTING_RANGE_TOO_LARGE=Adjustment range too wide
|
|
CLIMATECONTROL_RT_TRANSCEIVER|FAULT_REPORTING|ADJUSTING_RANGE_TOO_SMALL=Adjustment range too small
|
|
CLIMATECONTROL_RT_TRANSCEIVER|FAULT_REPORTING|COMMUNICATION_ERROR=Communication error
|
|
CLIMATECONTROL_RT_TRANSCEIVER|FAULT_REPORTING|LOWBAT=Empty battery
|
|
CLIMATECONTROL_RT_TRANSCEIVER|FAULT_REPORTING|NO_FAULT=no error
|
|
CLIMATECONTROL_RT_TRANSCEIVER|FAULT_REPORTING|VALVE_ERROR_POSITION=Valve error position
|
|
CLIMATECONTROL_RT_TRANSCEIVER|FAULT_REPORTING|VALVE_TIGHT=Valve sticking
|
|
CLIMATECONTROL_VENT_DRIVE=Wireless Radiator Thermostat
|
|
CLIMATECONTROL_VENT_DRIVE|ERROR|ADJUSTING_RANGE_TO_SMALL=Adjustment range too small
|
|
CLIMATECONTROL_VENT_DRIVE|ERROR|LOWBAT=moved to fault position, battery almost empty
|
|
CLIMATECONTROL_VENT_DRIVE|ERROR|VALVE_DRIVE_BLOCKED=Valve drive sluggish or blocked
|
|
CLIMATECONTROL_VENT_DRIVE|ERROR|VALVE_DRIVE_LOOSE=The valve drive is not installed or the adjustment range is too great
|
|
CLIMATECONTROL_VENT_DRIVE|VALVE_ERROR_POSITION=Valve drive fault position
|
|
CLIMATECONTROL_VENT_DRIVE|VALVE_OFFSET_VALUE=Valve drive offset position
|
|
CLIMATECONTROL_VENT_DRIVE|VALVE_STATE=Valve drive position
|
|
COLOR|LEVEL=Brightness
|
|
COMBINED_PARAMETER=Channel action
|
|
COMFORT_MODE=Comfort temperature
|
|
COMPATIBILITY_MODE=Compatibility mode
|
|
CONDITION_CURRENT=Current sensor
|
|
CONDITION_FREQUENCY=Frequency sensor
|
|
CONDITION_POWER=Power sensor
|
|
CONDITION_VOLTAGE=Voltage sensor
|
|
COND_SWITCH_TRANSMITTER=Transmitter decision value
|
|
COND_SWITCH_TRANSMITTER_BRIGHTNESS=Brightness sensor
|
|
COND_SWITCH_TRANSMITTER_HUMIDITY=Humidity sensor
|
|
COND_SWITCH_TRANSMITTER_RAIN_DROP=Rain sensor
|
|
COND_SWITCH_TRANSMITTER_RAIN_QUANTITY=Sensor rainfall volume
|
|
COND_SWITCH_TRANSMITTER_TEMPERATURE=Temperature sensor
|
|
COND_SWITCH_TRANSMITTER_WIND_DIRECTION=Wind direction sensor
|
|
COND_SWITCH_TRANSMITTER_WIND_SPEED=Wind velocity sensor
|
|
COND_TX_CYCLIC_ABOVE=Send decision value cyclically
|
|
COND_TX_CYCLIC_BELOW=Send decision value cyclically
|
|
COND_TX_DECISION_ABOVE=Sent decision value if upper limit is exceeded
|
|
COND_TX_DECISION_BELOW=Sent decision value if lower limit falls below threshold
|
|
COND_TX_FALLING=Send decision value if lower limit falls below threshold +
|
|
COND_TX_RISING=Send decision value if upper limit is exceeded +
|
|
COND_TX_THRESHOLD_HI=Upper limit
|
|
COND_TX_THRESHOLD_LO=Lower limit
|
|
CONFIG_PENDING|FALSE=There is no configuration data to be transmitted
|
|
CONFIG_PENDING|TRUE=Configuration data is ready for transmission
|
|
CONF_BUTTON_TIME=For the set time after power supply, the long button press enables configuration. Afterwards, it serves for operation.
|
|
CONF_BUTTON_TIME|PERMANENT=permanent
|
|
CONTROL_MODE|AUTO-MODE=Auto mode
|
|
CONTROL_MODE|BOOST-MODE=Boost function
|
|
CONTROL_MODE|MANU-MODE=Manu mode
|
|
CONTROL_MODE|PARTY-MODE=Holiday mode
|
|
CURRENT=Current
|
|
CURRENTDETECTION_BEHAVIOR=Response
|
|
CURRENTDETECTION_BEHAVIOR|"CURRENTDETECTION_ACTIVE"=Two-way circuit
|
|
CURRENTDETECTION_BEHAVIOR|"CURRENTDETECTION_INACTIVE_VALUE_OUTPUT_1"=Output 1 active
|
|
CURRENTDETECTION_BEHAVIOR|"CURRENTDETECTION_INACTIVE_VALUE_OUTPUT_2"=Output 2 active
|
|
CURRENT_ILLUMINATION=Unfiltered, current level of brightness
|
|
CURRENT_PASSAGE_DIRECTION|FALSE=Passage detected: No
|
|
CURRENT_PASSAGE_DIRECTION|TRUE=Passage detected: Yes
|
|
CYCLIC_INFO_MSG=Cyclically status message
|
|
CYCLIC_INFO_MSG_DIS=Number of messages that are left out
|
|
CYCLIC_INFO_MSG_DIS_UNCHANGED=Number of unchanged status messages that are left out
|
|
CYCLIC_INFO_MSG_OVERDUE_THRESHOLD=Number of missed status messages until 'unreach' is flagged
|
|
CYCLIC_INFO_MSG_PAUSE=Interval for cyclically status messages
|
|
DATE_TIME_UNKNOWN|FALSE=Correct time known
|
|
DATE_TIME_UNKNOWN|TRUE=Correct time unknown
|
|
DAYLIGHT_SAVINGS_TIME=Automatic changeover from summer time to winter time
|
|
DDC|STATE=Open
|
|
DECISION_VALUE=Decision value
|
|
DEVICE_LED_MODE=Device LED
|
|
DEVICE_LED_MODE|OFF=off
|
|
DEVICE_LED_MODE|ON=on
|
|
DEV_RPT_CNT_MAX=max. repeater level
|
|
DEW_POINT_ALARM|FALSE=No dew point alarm
|
|
DEW_POINT_ALARM|TRUE=Dew point alarm
|
|
DIGITAL_ANALOG_INPUT|BEHAVIOUR=Input signal
|
|
DIGITAL_ANALOG_INPUT|CALIBRATION=Calibration
|
|
DIGITAL_ANALOG_INPUT|STATE|FALSE=Switching status: off
|
|
DIGITAL_ANALOG_INPUT|STATE|TRUE=Switching status: on
|
|
DIGITAL_ANALOG_INPUT|VALUE=Input value
|
|
DIGITAL_ANALOG_OUTPUT|BEHAVIOUR=Output signal
|
|
DIGITAL_ANALOG_OUTPUT|FREQUENCY=Output frequency
|
|
DIGITAL_ANALOG_OUTPUT|PULSETIME=Pulse time
|
|
DIGITAL_ANALOG_OUTPUT|STATE|FALSE=Switching status: off
|
|
DIGITAL_ANALOG_OUTPUT|STATE|TRUE=Switching status: on
|
|
DIGITAL_INPUT=Digital
|
|
DIGITAL_INPUT|BEHAVIOUR=Input signal
|
|
DIGITAL_INPUT|FREQUENCY=Input frequency
|
|
DIGITAL_INPUT|STATE|FALSE=Switching status: off
|
|
DIGITAL_INPUT|STATE|TRUE=Switching status: on
|
|
DIGITAL_OUTPUT=Digital
|
|
DIGITAL_OUTPUT|STATE|FALSE=Switching status: off
|
|
DIGITAL_OUTPUT|STATE|TRUE=Switching status: on
|
|
DIMMER=Dimming actuator
|
|
DIMMER_TRANSMITTER|ACTIVITY_STATE|DOWN=Ramp down
|
|
DIMMER_TRANSMITTER|ACTIVITY_STATE|STABLE=Level stable
|
|
DIMMER_TRANSMITTER|ACTIVITY_STATE|UNKNOWN=Dimmer activity unknown
|
|
DIMMER_TRANSMITTER|ACTIVITY_STATE|UP=Ramp up
|
|
DIMMER_TRANSMITTER|PROCESS|NOT_STABLE=Ramp active
|
|
DIMMER_TRANSMITTER|PROCESS|STABLE=Level stable
|
|
DIMMER_VIRTUAL_RECEIVER=Dimming actuator
|
|
DIMMER_VIRTUAL_RECEIVER|ACTIVITY_STATE|DOWN=Ramp down
|
|
DIMMER_VIRTUAL_RECEIVER|ACTIVITY_STATE|STABLE=Level stable
|
|
DIMMER_VIRTUAL_RECEIVER|ACTIVITY_STATE|UNKNOWN=Dimmer activity unknown
|
|
DIMMER_VIRTUAL_RECEIVER|ACTIVITY_STATE|UP=Ramp up
|
|
DIMMER_VIRTUAL_RECEIVER|PROCESS|NOT_STABLE=Ramp active
|
|
DIMMER_VIRTUAL_RECEIVER|PROCESS|STABLE=Level stable
|
|
DIMMER|CHARACTERISTIC=Output characteristic
|
|
DIMMER|ERROR_OVERHEAT=Overheat
|
|
DIMMER|ERROR_OVERLOAD=Overload
|
|
DIMMER|ERROR_REDUCED=Temperature critical (load reduction)
|
|
DIMMER|ERROR|LOAD_FAILURE=Load error
|
|
DIMMER|FUSE_DELAY=Inertia overcurrent detection
|
|
DIMMER|LEVEL=Dimming value
|
|
DIMMER|LOAD_APPEAR_BEHAVIOUR=Activity on load return
|
|
DIMMER|LOAD_ERROR_CALIB=Load error calibration
|
|
DIMMER|LOGIC_COMBINATION=Connection rule
|
|
DIMMER|OLD_LEVEL=Last dimming value
|
|
DIMMER|ON_TIME=Switch-on time
|
|
DIMMER|OVERTEMP_LEVEL=Switch-off threshold for over temperature
|
|
DIMMER|POWERUP_ACTION=Activity on power supply
|
|
DIMMER|RAMP_STOP=Stop dimming ramp
|
|
DIMMER|RAMP_TIME=Dimming time
|
|
DIMMER|REDUCE_LEVEL=Reducing level over temperature
|
|
DIMMER|REDUCE_TEMP_LEVEL=Reducing threshold over temperature
|
|
DIMMER|RELAY_OFFDELAY_TIME=Relay time for switch off delay
|
|
DISABLE_ACOUSTIC_CHANNELSTATE=Deactivate buzzer
|
|
DISABLE_ACOUSTIC_SENDSTATE=Deactivate acoustic confirmation of button press
|
|
DISPLAY_BACKLIGHT_MODE=Display back light mode
|
|
DISPLAY_BACKLIGHT_MODE|AUTO=automatic
|
|
DISPLAY_BACKLIGHT_MODE|OFF=off
|
|
DISPLAY_BACKLIGHT_MODE|ON=on
|
|
DISPLAY_BACKLIGHT_TIME=Display back light time
|
|
DISPLAY_BRIGHTNESS=Display brightness
|
|
DISPLAY_CONTRAST=Display contrast
|
|
DISPLAY_ENERGYOPTIONS=The display will be switched off after
|
|
DISPLAY_INVERTING=Display inverting
|
|
DISPLAY|ALARM_COUNT=Number alarm messages
|
|
DISPLAY|ARROW_DOWN=Arrow symbol down
|
|
DISPLAY|ARROW_UP=Arrow symbol up
|
|
DISPLAY|BACKLIGHT=Back light on
|
|
DISPLAY|BACKLIGHT_AT_ALARM=Back light at alarm message
|
|
DISPLAY|BACKLIGHT_AT_ALARM|BLINK_FAST=Flashing quickly
|
|
DISPLAY|BACKLIGHT_AT_ALARM|BLINK_SLOW=Flashing slowly
|
|
DISPLAY|BACKLIGHT_AT_ALARM|OFF=Off
|
|
DISPLAY|BACKLIGHT_AT_ALARM|ON=On
|
|
DISPLAY|BACKLIGHT_AT_SERVICE=Back light at service message
|
|
DISPLAY|BACKLIGHT_AT_SERVICE|BLINK_FAST=Flashing quickly
|
|
DISPLAY|BACKLIGHT_AT_SERVICE|BLINK_SLOW=Flashing slowly
|
|
DISPLAY|BACKLIGHT_AT_SERVICE|OFF=Off
|
|
DISPLAY|BACKLIGHT_AT_SERVICE|ON=On
|
|
DISPLAY|BACKLIGHT_AT_STATUS=Back light at status message
|
|
DISPLAY|BACKLIGHT_AT_STATUS|BLINK_FAST=Flashing quickly
|
|
DISPLAY|BACKLIGHT_AT_STATUS|BLINK_SLOW=Flashing slowly
|
|
DISPLAY|BACKLIGHT_AT_STATUS|OFF=Off
|
|
DISPLAY|BACKLIGHT_AT_STATUS|ON=On
|
|
DISPLAY|BACKLIGHT|BLINK_FAST=Back light flashing quickly
|
|
DISPLAY|BACKLIGHT|BLINK_SLOW=Back light flashing slowly
|
|
DISPLAY|BACKLIGHT|OFF=Back light off
|
|
DISPLAY|BACKLIGHT|ON=Back light on
|
|
DISPLAY|BEEP_AT_ALARM=Alarm sound
|
|
DISPLAY|BEEP_AT_ALARM|NONE=Off
|
|
DISPLAY|BEEP_AT_ALARM|TONE1=Sound 1
|
|
DISPLAY|BEEP_AT_ALARM|TONE2=Sound 2
|
|
DISPLAY|BEEP_AT_ALARM|TONE3=Sound 3
|
|
DISPLAY|BEEP_AT_SERVICE=Service sound
|
|
DISPLAY|BEEP_AT_SERVICE|NONE=Off
|
|
DISPLAY|BEEP_AT_SERVICE|TONE1=Sound 1
|
|
DISPLAY|BEEP_AT_SERVICE|TONE2=Sound 2
|
|
DISPLAY|BEEP_AT_SERVICE|TONE3=Sound 3
|
|
DISPLAY|BEEP_AT_STATUSINFO=Status sound
|
|
DISPLAY|BEEP_AT_STATUSINFO|NONE=Off
|
|
DISPLAY|BEEP_AT_STATUSINFO|TONE1=Sound 1
|
|
DISPLAY|BEEP_AT_STATUSINFO|TONE2=Sound 2
|
|
DISPLAY|BEEP_AT_STATUSINFO|TONE3=Sound 3
|
|
DISPLAY|BEEP|NONE=No signal
|
|
DISPLAY|BEEP|TONE1=Sound 1
|
|
DISPLAY|BEEP|TONE2=Sound 2
|
|
DISPLAY|BEEP|TONE3=Sound 3
|
|
DISPLAY|BELL=Chime symbol
|
|
DISPLAY|BLIND=Shutter symbol
|
|
DISPLAY|BULB=Lamp symbol
|
|
DISPLAY|CLOCK=Clock symbol
|
|
DISPLAY|DOOR=Door symbol
|
|
DISPLAY|MESSAGE_SHOW_TIME=Display duration for CCU messages
|
|
DISPLAY|MESSAGE_SHOW_TIME|PERMANENT=permanent
|
|
DISPLAY|PHONE=Phone symbol
|
|
DISPLAY|SCENE=Scene symbol
|
|
DISPLAY|SERVICE_COUNT=Number service messages
|
|
DISPLAY|SUBMIT=Service message transmitted
|
|
DISPLAY|SWITCH=Switch symbol
|
|
DISPLAY|TEXT=Text
|
|
DISPLAY|UNIT|CELSIUS=Unit Celsius
|
|
DISPLAY|UNIT|FAHRENHEIT=Unit Fahrenheit
|
|
DISPLAY|UNIT|NONE=No unit
|
|
DISPLAY|UNIT|PERCENT=Unit percentage
|
|
DISPLAY|UNIT|WATT=Unit watt
|
|
DISPLAY|WINDOW=Window symbol
|
|
DOOR_COMMAND|CLOSE=Closing the garage door
|
|
DOOR_COMMAND|NOP=No action
|
|
DOOR_COMMAND|OPEN=Opening the garage door
|
|
DOOR_COMMAND|PARTIAL_OPEN=Ventilation position
|
|
DOOR_COMMAND|STOP=Stop movement
|
|
DOOR_RECEIVER=Door-/garage door opener
|
|
DOOR_STATE|CLOSED=Position closed
|
|
DOOR_STATE|OPEN=Position opened
|
|
DOOR_STATE|POSITION_UNKNOWN=Position unknown
|
|
DOOR_STATE|VENTILATION_POSITION=Ventilation position
|
|
DUAL_WHITE_BRIGHTNESS=Dual White Controller (dimmer)
|
|
DUAL_WHITE_COLOR=Dual White Controller (colour)
|
|
DUAL_WHITE_COLOR|LEVEL=Colour value
|
|
DUAL_WHITE_COLOR|LEVEL_REAL=Colour value real channel
|
|
DUAL_WHITE_COLOR|OLD_LEVEL=Last value
|
|
DUAL_WHITE_COLOR|RAMP_STOP=Stop colour change
|
|
DUAL_WHITE_COLOR|RAMP_TIME=Ramp time for colour change
|
|
DURATION_UNIT=Unit duration
|
|
DURATION_UNIT|10MS=Unit duration: 10 mS
|
|
DURATION_UNIT|D=Unit duration: Days
|
|
DURATION_UNIT|H=Unit duration: Hours
|
|
DURATION_UNIT|M=Unit duration: Minutes
|
|
DURATION_UNIT|S=Unit duration: Seconds
|
|
DURATION_VALUE=Value duration
|
|
DUTYCYCLE_LIMIT=Duty cycle limit for sending data telegrams
|
|
DUTY_CYCLE|FALSE=Duty cycle OK
|
|
DUTY_CYCLE|TRUE=Duty cycle reached
|
|
EMERGENCY_OPERATION|FALSE=Connection with room control unit OK
|
|
EMERGENCY_OPERATION|TRUE=Connection failure with room control unit
|
|
ENABLE_ROUTING=Routing active
|
|
ENERGIE_METER_TRANSMITTER|AVERAGING=Averaging via
|
|
ENERGIE_METER_TRANSMITTER|ENERGY_COUNTER=Energy counter device
|
|
ENERGIE_METER_TRANSMITTER|ENERGY_COUNTER_OVERFLOW|FALSE=no transfer
|
|
ENERGIE_METER_TRANSMITTER|ENERGY_COUNTER_OVERFLOW|TRUE=Transfer
|
|
ENERGIE_METER_TRANSMITTER|FREQUENCY=Frequency
|
|
ENERGIE_METER_TRANSMITTER|POWER=Power
|
|
ENERGIE_METER_TRANSMITTER|TX_THRESHOLD_POWER=TX Difference Power
|
|
ERROR=Error
|
|
ERROR_BAD_RECHARGEABLE_BATTERY_HEALTH=Battery status: Not OK
|
|
ERROR_BAD_RECHARGEABLE_BATTERY_HEALTH|FALSE=Battery status: OK
|
|
ERROR_BAD_RECHARGEABLE_BATTERY_HEALTH|TRUE=Battery status: Not OK
|
|
ERROR_BUS_CONFIG_MISMATCH=The actual Bus topology is different to the configured Bus topology.
|
|
ERROR_BUS_CONFIG_MISMATCH|FALSE=The actual bus topology corresponds to the configured bus topology.
|
|
ERROR_BUS_CONFIG_MISMATCH|TRUE=The actual Bus topology is different to the configured Bus topology.
|
|
ERROR_CODE=Error code
|
|
ERROR_COPROCESSOR=The channel is not accessible. Please check the power supply of the channel or deactivate it in the WebUI.
|
|
ERROR_COPROCESSOR|FALSE=Fehler CoProcessor: Nein
|
|
ERROR_COPROCESSOR|TRUE=Fehler CoProcessor: Ja
|
|
ERROR_NON_FLAT_POSITIONING=Error position detection
|
|
ERROR_NON_FLAT_POSITIONING|FALSE=Angle for position detection exceeded: No
|
|
ERROR_NON_FLAT_POSITIONING|TRUE=Angle for position detection exceeded: Yes
|
|
ERROR_OVERHEAT=Overheat: Yes
|
|
ERROR_OVERHEAT|FALSE=Overheat: No
|
|
ERROR_OVERHEAT|TRUE=Overheat: Yes
|
|
ERROR_OVERLOAD=Current overload: Yes
|
|
ERROR_OVERLOAD|FALSE=Current overload: No
|
|
ERROR_OVERLOAD|TRUE=Current overload: Yes
|
|
ERROR_POWER_FAILURE=Power supply error
|
|
ERROR_POWER_FAILURE|FALSE=Power supply OK
|
|
ERROR_POWER_FAILURE|TRUE=Power supply error
|
|
ERROR_POWER_SHORT_CIRCUIT_BUS_1=A short circuit between the power lines of Bus 1 was detected.
|
|
ERROR_POWER_SHORT_CIRCUIT_BUS_1|FALSE=No short circuit between the power lines of Bus 1 detected.
|
|
ERROR_POWER_SHORT_CIRCUIT_BUS_1|TRUE=A short circuit between the power lines of Bus 1 was detected.
|
|
ERROR_POWER_SHORT_CIRCUIT_BUS_2=A short circuit between the power lines of Bus 2 was detected.
|
|
ERROR_POWER_SHORT_CIRCUIT_BUS_2|FALSE=No short circuit between the power lines of Bus 2 detected.
|
|
ERROR_POWER_SHORT_CIRCUIT_BUS_2|TRUE=A short circuit between the power lines of Bus 2 was detected.
|
|
ERROR_POWER|FALSE=Power supply error
|
|
ERROR_POWER|TRUE=Power supply voltage OK
|
|
ERROR_REDUCED|FALSE=Full power possible
|
|
ERROR_REDUCED|TRUE=reduced power
|
|
ERROR_RESTART_NEEDED=The device must be restarted.
|
|
ERROR_RESTART_NEEDED|FALSE=Neustart nötig: Nein
|
|
ERROR_RESTART_NEEDED|TRUE=Neustart nötig: Ja
|
|
ERROR_SABOTAGE|FALSE=Sabotage triggered
|
|
ERROR_SABOTAGE|TRUE=Sabotage OK
|
|
ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_1=A short circuit between 24V line and the Data line A and/or B of Bus 1 was detected.
|
|
ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_1|FALSE=No short circuit between 24V line and the Data line A and/or B of Bus 1 detected.
|
|
ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_1|TRUE=A short circuit between 24V line and the Data line A and/or B of Bus 1 was detected.
|
|
ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_2=A short circuit between 24V line and the Data line A and/or B of Bus 2 was detected.
|
|
ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_2|FALSE=No short circuit between 24V line and the Data line A and/or B of Bus 2 detected.
|
|
ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_2|TRUE=A short circuit between 24V line and the Data line A and/or B of Bus 2 was detected.
|
|
ERROR_UNDERVOLTAGE=Operating voltage not OK
|
|
ERROR_UNDERVOLTAGE|FALSE=Operating voltage OK
|
|
ERROR_UNDERVOLTAGE|TRUE=Operating voltage not OK
|
|
ERROR_UPDATE|FALSE=Error device update: no
|
|
ERROR_UPDATE|TRUE=Error device update: Yes
|
|
ERROR_WIND_COMMUNICATION|FALSE=Sensor wind directionCommunication OK
|
|
ERROR_WIND_COMMUNICATION|TRUE=Sensor wind directionCommunication error
|
|
ERROR_WIND_NORTH|FALSE=Sensor wind directionNorth direction calibrated
|
|
ERROR_WIND_NORTH|TRUE=Sensor wind directionNorth direction not calibrated
|
|
ERROR|NO_ERROR=No error
|
|
EVENT_DELAYTIME=Message delay
|
|
EVENT_DELAY_UNIT=Unit of event delay
|
|
EVENT_DELAY_VALUE=Value event delay
|
|
EVENT_FILTER_NUMBER=Sensitivity
|
|
EVENT_FILTER_PERIOD=Filter period
|
|
EVENT_RANDOMTIME_UNIT=Unit of random part
|
|
EVENT_RANDOMTIME_VALUE=Status messages random part
|
|
EXPECT_AES=AES encryption
|
|
EXTERNAL_CLOCK|FALSE=Energy-saving temperature mode inactive
|
|
EXTERNAL_CLOCK|TRUE=Energy-saving temperature mode active
|
|
FREQUENCY_ALTERNATING_LOW_HIGH=Frequency low/high
|
|
FREQUENCY_ALTERNATING_LOW_MID_HIGH=Frequency low/average/high
|
|
FREQUENCY_FALLING=Frequency dropping
|
|
FREQUENCY_HIGHON_LONGOFF=Frequency high on, long off
|
|
FREQUENCY_HIGHON_OFF=Frequency high on/off
|
|
FREQUENCY_INPUT=Analog
|
|
FREQUENCY_LOWON_LONGOFF_HIGHON_LONGOFF=Frequency low on - long off, high on - long off
|
|
FREQUENCY_LOWON_OFF_HIGHON_OFF=Frequency low on/off, high on/off
|
|
FREQUENCY_RISING=Frequency increasing
|
|
FREQUENCY_RISING_AND_FALLING=Frequency increasing/dropping
|
|
FROST_PROTECTION_TEMPERATURE=Frost protection temperature
|
|
FROST_PROTECTION|FALSE=Frost protection inactive
|
|
FROST_PROTECTION|TRUE=Frost protection active
|
|
FUSE_DELAY=Inertia overcurrent detection
|
|
GENERIC_INPUT_TRANSMITER=Input channel
|
|
HEATING_CLIMATECONTROL_CL_RECEIVER=Receiver thermostat
|
|
HEATING_CLIMATECONTROL_CL_TRANSMITTER=Transmitter thermostat
|
|
HEATING_CLIMATECONTROL_RECEIVER=Receiver thermostat
|
|
HEATING_CLIMATECONTROL_SWITCH_TRANSMITTER=Transmitter thermostat
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER=Transmitter thermostat
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|ACTIVE_PROFILE=Active profile
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|CONTROL_MODE=Auto/manu/party mode
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|FROST_PROTECTION|FALSE=Frost protection inactive
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|FROST_PROTECTION|TRUE=Frost protection active
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|HUMIDITY=Relative humidity
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|LEVEL=Valve opening
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|PARTY_MODE|FALSE=Holiday mode inactive
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|PARTY_MODE|TRUE=Holiday mode active
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|SET_POINT_MODE=Mode for setpoint temperature
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|SET_POINT_TEMPERATURE=Setpoint temperature
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|SWITCH_POINT_OCCURED|FALSE=Setpoint temperature not changed
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|SWITCH_POINT_OCCURED|TRUE=Setpoint temperature changed
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|VALVE_ADAPTION|FALSE=Adaption run inactive
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|VALVE_ADAPTION|TRUE=Adaption run active
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|WINDOW_STATE|CLOSED=Window closed
|
|
HEATING_CLIMATECONTROL_TRANSCEIVER|WINDOW_STATE|OPEN=Window opened
|
|
HEATING_KEY_RECEIVER=Receiver thermostat
|
|
HEATING_ROOM_TH_RECEIVER=Receiver thermostat
|
|
HEATING_ROOM_TH_TRANSCEIVER=Transmitter thermostat
|
|
HEATING_SHUTTER_CONTACT_RECEIVER=Receiver thermostat
|
|
HIGHEST_ILLUMINATION=Maximum level of brightness
|
|
HUMIDITY=Relative humidity
|
|
HUMIDITY_ALARM|FALSE=Humidity not exceeded
|
|
HUMIDITY_ALARM|TRUE=Humidity exceeded
|
|
HUMIDITY_LIMITER|FALSE=Operating mode humidity limit inactive
|
|
HUMIDITY_LIMITER|TRUE=Operating mode humidity limit active
|
|
IDENTIFICATION_MODE_KEY_VISUAL|FALSE=Lighting system button: OFF
|
|
IDENTIFICATION_MODE_KEY_VISUAL|TRUE=Lighting system button: ON
|
|
IDENTIFICATION_MODE_LCD_BACKLIGHT|FALSE=Lighting Display: OFF
|
|
IDENTIFICATION_MODE_LCD_BACKLIGHT|TRUE=Lighting Display: ON
|
|
IDENTIFY_DURATION=Duration of lighting
|
|
IDENTIFY_TARGET_LEVEL=Brightness value of lighting
|
|
ILLUMINATION=Brightness
|
|
INHIBIT=Lock
|
|
INHIBIT|FALSE=Lock inactive
|
|
INHIBIT|TRUE=Lock active
|
|
INPUT_OUTPUT=IO interface
|
|
INPUT_OUTPUT|BEHAVIOUR=Function
|
|
INPUT_OUTPUT|BEHAVIOUR|INPUT=Input
|
|
INPUT_OUTPUT|BEHAVIOUR|OUTPUT=Output
|
|
INPUT_OUTPUT|INPUT_LOCKED=Input locked
|
|
INPUT_OUTPUT|INPUT_TYPE=Input signal
|
|
INPUT_OUTPUT|INPUT_TYPE|PUSHBUTTON=Button
|
|
INPUT_OUTPUT|INPUT_TYPE|SWITCH=Switch
|
|
INPUT_OUTPUT|LONGPRESS_TIME=Duration until long button press will be recognized
|
|
INPUT_OUTPUT|LONG_PRESS_TIME=Duration until long button press will be recognized
|
|
INPUT_OUTPUT|STATE|FALSE=Switching status: off
|
|
INPUT_OUTPUT|STATE|TRUE=Switching status: on
|
|
JALOUSIE=Jalousie actuator
|
|
JALOUSIE|CHANGE_OVER_DELAY=Blind direction switch-over time
|
|
JALOUSIE|LEVEL=Blind level
|
|
JALOUSIE|LEVEL_COMBINED=Common value: Blind level, slats position
|
|
JALOUSIE|LEVEL_SLATS=Slats position
|
|
JALOUSIE|LEVEL_SLATS|NO_MODIFICATION=Slats position, no change
|
|
JALOUSIE|LEVEL_SLATS|OLD_LEVEL=Slats position, last value
|
|
JALOUSIE|LEVEL|NO_MODIFICATION=No change
|
|
JALOUSIE|LEVEL|OLD_LEVEL=Last value
|
|
JALOUSIE|REFERENCE_RUNNING_TIME_BOTTOM_TOP=Running time bottom to top
|
|
JALOUSIE|REFERENCE_RUNNING_TIME_SLATS=Slat adjustment time
|
|
JALOUSIE|REFERENCE_RUNNING_TIME_TOP_BOTTOM=Running time top to bottom
|
|
JALOUSIE|REFERENCE_RUN_COUNTER=Number of runs until automatic calibration drive
|
|
JALOUSIE|STOP=Stop
|
|
KEY=Button
|
|
KEYMATIC=KeyMatic
|
|
KEYMATIC|ANGLE_LOCKED=Rotation angle position locked
|
|
KEYMATIC|ANGLE_MAX=Rotation angle final position locked
|
|
KEYMATIC|ANGLE_OPEN=Rotation angle final position open door
|
|
KEYMATIC|ERROR|CLUTCH_FAILURE=Clutch failed
|
|
KEYMATIC|ERROR|MOTOR_ABORTED=Motor run cancelled
|
|
KEYMATIC|HOLD_PWM=Motor power hold time open door
|
|
KEYMATIC|HOLD_TIME=Hold time open door
|
|
KEYMATIC|LED_FLASH_LOCKED=LED flashes if locked
|
|
KEYMATIC|LED_FLASH_UNLOCKED=LED flashes if not locked
|
|
KEYMATIC|OPEN=Open door
|
|
KEYMATIC|RELOCK_DELAY=Lock automatically after
|
|
KEYMATIC|RELOCK_DELAY|NOT_USED=Do not lock automatically
|
|
KEYMATIC|SETUP_DIR=Lock direction of rotation
|
|
KEYMATIC|SETUP_DIR|LEFT=to the left
|
|
KEYMATIC|SETUP_DIR|RIGHT=to the right
|
|
KEYMATIC|SETUP_POSITION=Rotation angle neutral position
|
|
KEYMATIC|STATE_UNCERTAIN|FALSE=Lock status known
|
|
KEYMATIC|STATE_UNCERTAIN|TRUE=Lock status unknown
|
|
KEYMATIC|STATE|FALSE=Lock locked
|
|
KEYMATIC|STATE|TRUE=Lock unlocked
|
|
KEYPRESS_SIGNAL=Button sound
|
|
KEY_TRANSCEIVER=Push button
|
|
KEY_TRANSCEIVER|CHANNEL_OPERATION_MODE=Channel behaviour
|
|
KEY_TRANSCEIVER|CHANNEL_OPERATION_MODE|BINARY_BEHAVIOR=Contact
|
|
KEY_TRANSCEIVER|CHANNEL_OPERATION_MODE|INACTIVE=not active
|
|
KEY_TRANSCEIVER|CHANNEL_OPERATION_MODE|KEY_BEHAVIOR=Button
|
|
KEY_TRANSCEIVER|CHANNEL_OPERATION_MODE|SWITCH_BEHAVIOR=Switch
|
|
KEY_TRANSCEIVER|DBL_PRESS_TIME=Double-click time (keypad lock)
|
|
KEY_TRANSCEIVER|LONG_PRESS_TIME=Minimum duration for long button press
|
|
KEY|CHANNEL_FUNCTION=Channel function
|
|
KEY|CHANNEL_FUNCTION|BINARY_BEHAVIOR=Door/Window Contact
|
|
KEY|CHANNEL_FUNCTION|BUTTON_BEHAVIOR=Button (toggle-mode)
|
|
KEY|CHANNEL_FUNCTION|INACTIVE=not active
|
|
KEY|CHANNEL_FUNCTION|SWITCH_BEHAVIOR=Switch (2-key-mode)
|
|
KEY|DBL_PRESS_TIME=Double-click time (keypad lock)
|
|
KEY|INPUT_LOCKED=Input locked
|
|
KEY|INPUT_TYPE=Input type
|
|
KEY|INPUT_TYPE|PUSHBUTTON=Button
|
|
KEY|INPUT_TYPE|SWITCH=Switch
|
|
KEY|LCD_LEVEL_INTERP=Text in display
|
|
KEY|LCD_SYMBOL=Symbol in display
|
|
KEY|LONGPRESS_TIME=Minimum duration for long button press
|
|
KEY|LONG_PRESS_TIME=Minimum duration for long button press
|
|
KEY|MSG_FOR_POS_A=Message in position closed
|
|
KEY|MSG_FOR_POS_A|CLOSED=closed
|
|
KEY|MSG_FOR_POS_A|NO_MSG=no message
|
|
KEY|MSG_FOR_POS_A|OPEN=open
|
|
KEY|MSG_FOR_POS_B=Message in position open
|
|
KEY|MSG_FOR_POS_B|CLOSED=closed
|
|
KEY|MSG_FOR_POS_B|NO_MSG=no message
|
|
KEY|MSG_FOR_POS_B|OPEN=open
|
|
KEY|TEXT1=Text line 1
|
|
KEY|TEXT2=Text line 2
|
|
KEY|TEXTLINE_1=Text line
|
|
KEY|TEXTLINE_2=Text line
|
|
LANGUAGE=Language
|
|
LANGUAGE|ENGLISH=English
|
|
LANGUAGE|GERMAN=German
|
|
LAST_PASSAGE_DIRECTION|FALSE=Last passage detected: No
|
|
LAST_PASSAGE_DIRECTION|TRUE=Last passage detected: Yes
|
|
LED_DISABLE_CHANNELSTATE=Deactivate device LED
|
|
LED_DISABLE_LED_DISABLE_SENDSTATE=Deactivate visual confirmation of button press
|
|
LED_ONTIME=LED on time (gn/rd)
|
|
LED_SLEEP_MODE|OFF=Wake up display from standby mode
|
|
LED_SLEEP_MODE|ON=Bring system to standby mode
|
|
LED_STATUS|GREEN=Display green
|
|
LED_STATUS|OFF=Display off
|
|
LED_STATUS|ORANGE=Display orange
|
|
LED_STATUS|RED=Display red
|
|
LEVEL=Value
|
|
LEVEL_REAL=Value
|
|
LIVE_MODE_RX=Live mode
|
|
LOCAL_RESET_DISABLE=Lock reset via device button
|
|
LOCAL_RESET_DISABLED=Lock reset via device button
|
|
LOGGING=Logging
|
|
LOGGING_TIME=Duration after logging message is send
|
|
LOGGING|FALSE=deactivated
|
|
LOGGING|OFF=deactivated
|
|
LOGGING|ON=activated
|
|
LOGGING|TRUE=activated
|
|
LOGIC_AND=AND (lower level has priority)
|
|
LOGIC_ANDINVERS=AND_INVERS (AND with previous inverting of channel level)
|
|
LOGIC_COMBINATION=Connection rule
|
|
LOGIC_INACTIVE=Channel inactive
|
|
LOGIC_INVERSMINUS=INVERS_MINUS (equal to MINUS, but with subsequent inverting of level)
|
|
LOGIC_INVERSMUL=INVERS_MULTI (equal to MULTI, but with subsequent inverting of level)
|
|
LOGIC_INVERSPLUS=INVERS_PLUS (equal to PLUS, but with subsequent inverting of level)
|
|
LOGIC_MINUS=MINUS (level subtraction, minimum = 0%)
|
|
LOGIC_MINUSINVERS=MINUS_INVERS (MINUS with previous inverting of level)
|
|
LOGIC_MUL=MULTI (level multiplication, maximum = 100%)
|
|
LOGIC_MULINVERS=MULTI_INVERS (MULTI with previous inverting of level)
|
|
LOGIC_NAND=NAND (equal to AND, but with subsequent inverting of level)
|
|
LOGIC_NOR=NOR (equal to OR, but with subsequent inverting of level)
|
|
LOGIC_OR=OR (higher level has priority)
|
|
LOGIC_ORINVERS=OR_INVERS (OR with previous inverting of channel level)
|
|
LOGIC_PLUS=PLUS (level addition, maximum = 100%)
|
|
LOGIC_PLUSINVERS=PLUS_INVERS (PLUS with previous inverting of level)
|
|
LOGIC_XOR=XOR (equal to OR, but if both levels > 0. the result is 0)
|
|
LOWBAT_SIGNAL=Low bat. signal
|
|
LOWERING_MODE=Reduction temperature
|
|
LOWEST_ILLUMINATION=Minimum level of brightness
|
|
MAINS_POWERED=Mains operation
|
|
MAINTENANCE|ERROR_OVERHEAT=Overheat: Yes
|
|
MAINTENANCE|ON_MIN_LEVEL=Valve position changeover value
|
|
MAINTENANCE|PWM_AT_LOW_VALVE_POSITION=Automatic changeover from continuous to PWM (with small valve positions)
|
|
MANU_MODE=Manu mode
|
|
MASS_CONCENTRATION_PM_1=Mass concentration PM1.0
|
|
MASS_CONCENTRATION_PM_10=Mass concentration PM10
|
|
MASS_CONCENTRATION_PM_2_5=Mass concentration PM2.5
|
|
MIN_MAX_VALUE_NOT_RELEVANT_FOR_MANU_MODE=Ignore min./max. temperature in manu mode
|
|
MIOB_DIN_CONFIG=Digital input mode
|
|
MODUS_BUTTON_LOCK=Mode operating lock
|
|
MOD_EM8BIT_TRANSMITTER=8-bit transmitter
|
|
MOD_EM8BIT_TRANSMITTER|DATA_INPUT_PROPERTIE_IN0=Input 0
|
|
MOD_EM8BIT_TRANSMITTER|DATA_INPUT_PROPERTIE_IN1=Input 1
|
|
MOD_EM8BIT_TRANSMITTER|DATA_INPUT_PROPERTIE_IN2=Input 2
|
|
MOD_EM8BIT_TRANSMITTER|DATA_INPUT_PROPERTIE_IN3=Input 3
|
|
MOD_EM8BIT_TRANSMITTER|DATA_INPUT_PROPERTIE_IN4=Input 4
|
|
MOD_EM8BIT_TRANSMITTER|DATA_INPUT_PROPERTIE_IN5=Input 5
|
|
MOD_EM8BIT_TRANSMITTER|DATA_INPUT_PROPERTIE_IN6=Input 6
|
|
MOD_EM8BIT_TRANSMITTER|DATA_INPUT_PROPERTIE_IN7=Input 7
|
|
MOD_EM8BIT_TRANSMITTER|DATA_STABILITY_FILTER_TIME=Data stability filter time before transmission
|
|
MOD_EM8BIT_TRANSMITTER|DATA_TRANSMISSION_CONDITION=Data transmission condition
|
|
MOD_EM8BIT_TRANSMITTER|DATA_TRANSMISSION_CONDITION|LEVEL_CHANGE_DATA[HIGH_TO_LOW]=Mode 1
|
|
MOD_EM8BIT_TRANSMITTER|DATA_TRANSMISSION_CONDITION|LEVEL_CHANGE_DATA[LOW_TO_HIGH]=Mode 2
|
|
MOD_EM8BIT_TRANSMITTER|DATA_TRANSMISSION_CONDITION|LEVEL_CHANGE_DATA[LOW_TO_HIGH_AND_HIGH_TO_LOW]=Mode 3
|
|
MOD_EM8BIT_TRANSMITTER|DATA_TRANSMISSION_CONDITION|NEW_DATA_SEND_IMMEDIATELY_DEFAULT_DISABLE=Mode 7
|
|
MOD_EM8BIT_TRANSMITTER|DATA_TRANSMISSION_CONDITION|NEW_DATA_SEND_IMMEDIATELY_DEFAULT_ENABLE=Mode 5
|
|
MOD_EM8BIT_TRANSMITTER|DATA_TRANSMISSION_CONDITION|NEW_DATA_STABLE_FOR_TIME_DEFAULT_DISABLE=Mode 6
|
|
MOD_EM8BIT_TRANSMITTER|DATA_TRANSMISSION_CONDITION|NEW_DATA_STABLE_FOR_TIME_DEFAULT_ENABLE=Mode 4
|
|
MOD_EM8BIT_TRANSMITTER|STATE=Value of data input
|
|
MOISTURE_DETECTED|FALSE=Humidity detected: No
|
|
MOISTURE_DETECTED|TRUE=Water level detected: Yes
|
|
MOTIONDETECTOR_TRANSCEIVER=Motion detector
|
|
MOTION_ACTIVE_TIME=Time after which the detected movement is reset
|
|
MOTION_DETECTION_ACTIVE|FALSE=Motion detector inactive
|
|
MOTION_DETECTION_ACTIVE|TRUE=Motion detector active
|
|
MOTION_DETECTOR=Motion detector
|
|
MOTION_DETECTOR|ERROR|7=Sabotage
|
|
MOTION_DETECTOR|ERROR|SABOTAGE=Sabotage
|
|
MOTION_DETECTOR|MIN_INTERVAL=Minimum transmission interval
|
|
MOTION|FALSE=no motion
|
|
MOTION|TRUE=motion detected
|
|
MULTICAST_ROUTER_MODULE_ENABLED=MultiCast Routing
|
|
MULTI_MODE_INPUT_TRANSMITTER=Input Module
|
|
NOT_USED=Unused
|
|
NUMBER_CONCENTRATION_PM_1=Quantity concentration PM1.0
|
|
NUMBER_CONCENTRATION_PM_10=Quantity concentration PM10
|
|
NUMBER_CONCENTRATION_PM_2_5=Quantity concentration PM2.5
|
|
OLD_LEVEL=Last dimming value
|
|
ON_TIME=Switch-on time
|
|
OPERATING_VOLTAGE=Operating voltage in V
|
|
OPERATING_VOLTAGE_STATUS=Operating voltage in V
|
|
OPTICAL_ALARM_ACTIVE|FALSE=Visual signal deactivated
|
|
OPTICAL_ALARM_ACTIVE|TRUE=Visual signal activated
|
|
OPTICAL_ALARM_SELECTION|BLINKING_ALTERNATELY_REPEATING=Alternating slow flashing
|
|
OPTICAL_ALARM_SELECTION|BLINKING_BOTH_REPEATING=Simultaneous slow flashing
|
|
OPTICAL_ALARM_SELECTION|CONFIRMATION_SIGNAL_0=Confirmation signal 0 - long long
|
|
OPTICAL_ALARM_SELECTION|CONFIRMATION_SIGNAL_1=Confirmation signal 1 - long short
|
|
OPTICAL_ALARM_SELECTION|CONFIRMATION_SIGNAL_2=Confirmation signal 2 - long short short
|
|
OPTICAL_ALARM_SELECTION|DISABLE_OPTICAL_SIGNAL=No optical signal
|
|
OPTICAL_ALARM_SELECTION|DOUBLE_FLASHING_REPEATING=Simultaneous fast flashing
|
|
OPTICAL_ALARM_SELECTION|FLASHING_BOTH_REPEATING=Simultaneous short flashing
|
|
OVERTEMP_LEVEL=Switch-off threshold for over temperature
|
|
PARAM_SELECT=Selected sensors weather telegram
|
|
PARAM_SELECT|INACTIVE=No transmission
|
|
PARAM_SELECT|T1=Temperature sensor 1
|
|
PARAM_SELECT|T1-T2=Difference temperature sensor 1 - sensor 2
|
|
PARAM_SELECT|T2=Temperature sensor 2
|
|
PARAM_SELECT|T2-T1=Difference temperature sensor 2 - sensor 1
|
|
PARTY_SET_POINT_TEMPERATURE=Party/holiday temperature
|
|
PARTY_START_DAY=Holiday start day
|
|
PARTY_START_MONTH=Holiday start month
|
|
PARTY_START_TIME=Holiday start time
|
|
PARTY_START_YEAR=Holiday start year
|
|
PARTY_STOP_DAY=Holiday end day
|
|
PARTY_STOP_MONTH=Holiday end month
|
|
PARTY_STOP_TIME=Holiday end time
|
|
PARTY_STOP_YEAR=Holiday end year
|
|
PARTY_TEMPERATURE=Holiday temperature
|
|
PARTY_TIME_END=Party/holiday end time
|
|
PARTY_TIME_START=Party/holiday start time
|
|
PASSAGE_COUNTER_OVERFLOW|FALSE=Passage counter overrun: No
|
|
PASSAGE_COUNTER_OVERFLOW|TRUE=Passage counter overrun: Yes
|
|
PASSAGE_COUNTER_VALUE=Number of passages
|
|
PASSAGE_DETECTOR_COUNTER_TRANSMITTER=Passage sensor
|
|
PASSAGE_DETECTOR_COUNTER_TRANSMITTER|CHANNEL_OPERATION_MODE=Operating mode
|
|
PASSAGE_DETECTOR_DIRECTION_TRANSMITTER=Direction recognition
|
|
PEER_NEEDS_BURST=Burst signal necessary
|
|
PIR_OPERATION_MODE=Normal / eco mode
|
|
PIR_SENSITIVITY=Sensor sensitivity
|
|
POSITION_SAVE_TIME=Position saving time
|
|
POWERMETER_IEC1|ENERGY_COUNTER=Energy counter device
|
|
POWERMETER_IEC1|GAS_ENERGY_COUNTER=Energy and gas metering device
|
|
POWERMETER_IEC1|GAS_POWER=Gas consumption
|
|
POWERMETER_IEC1|IEC_ENERGY_COUNTER=IEC Energy counter device
|
|
POWERMETER_IEC1|IEC_POWER=IEC Power
|
|
POWERMETER_IEC1|POWER=Power
|
|
POWERMETER_IEC2|IEC_ENERGY_COUNTER=IEC Energy counter device
|
|
POWERMETER_IEC2|IEC_POWER=IEC Power
|
|
POWERMETER_IGL|ENERGY_COUNTER=Energy counter device
|
|
POWERMETER_IGL|GAS_ENERGY_COUNTER=Energy and gas metering device
|
|
POWERMETER_IGL|GAS_POWER=Gas consumption
|
|
POWERMETER_IGL|POWER=Power
|
|
POWERMETER|AVERAGING=Averaging via
|
|
POWERMETER|CURRENT=Current
|
|
POWERMETER|ENERGY_COUNTER=Energy counter device
|
|
POWERMETER|FREQUENCY=Frequency
|
|
POWERMETER|POWER=Power
|
|
POWERMETER|TX_MINDELAY=Status messages minimum delays
|
|
POWERMETER|TX_THRESHOLD_CURRENT=TX Difference Current
|
|
POWERMETER|TX_THRESHOLD_FREQUENCY=TX Difference Frequency
|
|
POWERMETER|TX_THRESHOLD_POWER=TX Difference Power
|
|
POWERMETER|TX_THRESHOLD_VOLTAGE=TX Difference Voltage
|
|
POWERMETER|VOLTAGE=Voltage
|
|
POWERUP_ACTION=Activity on power supply
|
|
POWERUP_JUMPTARGET=Activity on power supply
|
|
POWERUP_OFF=none
|
|
POWERUP_OFFDELAY_VALUE=Value switch off delay
|
|
POWERUP_OFFTIME_UNIT=Unit of switch-off time
|
|
POWERUP_ON=simulate short button press
|
|
POWERUP_ONDELAY_UNIT=Unit of switch on delay
|
|
POWERUP_ONDELAY_VALUE=Value switch on delay
|
|
POWERUP_ONTIME_UNIT=Unit of switch-on time
|
|
POWERUP_ONTIME_VALUE=Value switch-on time
|
|
POWER_MAINS_FAILURE|FALSE=Power failure: No
|
|
POWER_MAINS_FAILURE|TRUE=Power failure: Yes
|
|
POWER_SUPPLY=Power supply
|
|
PRESENCEDETECTOR_TRANSCEIVER=Presence Sensor
|
|
PRESENCEDETECTOR_TRANSCEIVER|MIN_INTERVAL=Minimum transmission interval
|
|
PRESENCE_DETECTION_ACTIVE|FALSE=Presence detector not active
|
|
PRESENCE_DETECTION_ACTIVE|TRUE=Presence detector active
|
|
PRESENCE_DETECTION_STATE|FALSE=No presence detected
|
|
PRESENCE_DETECTION_STATE|TRUE=Presence detected
|
|
PRESS_LONG=Button press long
|
|
PRESS_LONG|TRUE=Button press long
|
|
PRESS_SHORT=Button press short
|
|
PRESS_SHORT|TRUE=Button press short
|
|
PROCESS|NOT_STABLE=Device active
|
|
PROCESS|STABLE=Device not active
|
|
PULSE_SENSOR=Pulse sensor
|
|
PULSE_SENSOR|SEQUENCE_OK=Activated
|
|
PULSE_SENSOR|SEQUENCE_PULSE_1=Level 1 in s
|
|
PULSE_SENSOR|SEQUENCE_PULSE_1|NOT_USED=Unused
|
|
PULSE_SENSOR|SEQUENCE_PULSE_2=Pause 1 in s
|
|
PULSE_SENSOR|SEQUENCE_PULSE_2|NOT_USED=Unused
|
|
PULSE_SENSOR|SEQUENCE_PULSE_3=Level 2 in s
|
|
PULSE_SENSOR|SEQUENCE_PULSE_3|NOT_USED=Unused
|
|
PULSE_SENSOR|SEQUENCE_PULSE_4=Pause 2 in s
|
|
PULSE_SENSOR|SEQUENCE_PULSE_4|NOT_USED=Unused
|
|
PULSE_SENSOR|SEQUENCE_PULSE_5=Level 3 in s
|
|
PULSE_SENSOR|SEQUENCE_PULSE_5|NOT_USED=Unused
|
|
PULSE_SENSOR|SEQUENCE_TOLERANCE=Tolerance in s
|
|
RADIATOR_THERMOSTAT=Radiator Thermostat
|
|
RAINDETECTOR=Rain sensor
|
|
RAINDETECTOR|COND_TX_THRESHOLD_HI=Detection threshold for dry conditions
|
|
RAINDETECTOR|COND_TX_THRESHOLD_LO=Detection threshold for rain
|
|
RAINDETECTOR|EVENT_FILTERTIME=Filter time for rain detection
|
|
RAINDETECTOR|EVENT_RELEASE_FILTER_TIME=Filter time for dryness detection
|
|
RAINDETECTOR|STATE_HIGH_HOLD_TIME=Time until next measurement when rain is detected
|
|
RAINDETECTOR|STATE|DRY=Dry conditions
|
|
RAINDETECTOR|STATE|RAIN=Rain
|
|
RAINING=Rain
|
|
RAINING|FALSE=currently not raining
|
|
RAINING|TRUE=currently raining
|
|
RAIN_COUNTER=Rainfall
|
|
RAIN_COUNTER_OVERFLOW|FALSE=Overrun rainfall counter: No
|
|
RAIN_COUNTER_OVERFLOW|TRUE=Overrun rainfall counter: Yes
|
|
RAIN_DETECTION_TRANSMITTER=Rain sensor
|
|
RAMP_STOP=Stop dimming ramp
|
|
RAMP_TIME=Dimming time
|
|
RAMP_TIME_UNIT=Unit ramp time
|
|
RAMP_TIME_UNIT|10MS=Unit ramp time: mS
|
|
RAMP_TIME_UNIT|D=Unit ramp time: Days
|
|
RAMP_TIME_UNIT|H=Unit ramp time: Hours
|
|
RAMP_TIME_UNIT|M=Unit ramp time: Minutes
|
|
RAMP_TIME_UNIT|S=Unit ramp time: Seconds
|
|
RAMP_TIME_VALUE=Value ramp time
|
|
REDUCE_LEVEL=Reducing level over temperature
|
|
REDUCE_TEMP_LEVEL=Reducing threshold over temperature
|
|
REFERENCE_RUNNING_TIME_BOTTOM_TOP_UNIT=Unit movement time
|
|
REFERENCE_RUNNING_TIME_BOTTOM_TOP_VALUE=Value movement time
|
|
REFERENCE_RUNNING_TIME_SLATS_UNIT=Unit slat adjustment time
|
|
REFERENCE_RUNNING_TIME_SLATS_VALUE=Value slat adjustment time
|
|
REFERENCE_RUNNING_TIME_TOP_BOTTOM_UNIT=Unit movement time
|
|
REFERENCE_RUNNING_TIME_TOP_BOTTOM_VALUE=Value movement time
|
|
REMOTECONTROL_RECEIVER=Radiator Thermostat (Receiver remote control)
|
|
REPEATED_LONG_PRESS_TIMEOUT_UNIT=Unit for time-out
|
|
REPEATED_LONG_PRESS_TIMEOUT_VALUE=Value for time-out
|
|
RESET_MOTION=Reset status
|
|
RESET_PRESENCE=Reset status
|
|
RESTART_BUTTONPRESS=simulate short button press
|
|
RESTART_BUTTONPRESS_IF_WAS_ON=simulate short button press, if switched on before
|
|
RESTART_LAST=restore previous status
|
|
RESTART_OFF=none
|
|
RGB=Color value
|
|
RGBW=Color value
|
|
RGBW_AUTOMATIC=RGBW controller program
|
|
RGBW_AUTOMATIC|COLOR_CHANGE_SPEED=Color change speed
|
|
RGBW_AUTOMATIC|PROGRAM=Program number
|
|
RGBW_COLOR=RGBW controller color
|
|
RGBW_COLOR|COLOR=Color value
|
|
RGBW_COLOR|WHITE_ADJUSTMENT_VALUE_BLUE=White balance blue
|
|
RGBW_COLOR|WHITE_ADJUSTMENT_VALUE_GREEN=White balance green
|
|
RGBW_COLOR|WHITE_ADJUSTMENT_VALUE_RED=White balance red
|
|
ROTARY_CONTROL_TRANSCEIVER=Rotary Button
|
|
ROTARY_HANDLE_SENSOR=Window twist-handle contact
|
|
ROTARY_HANDLE_SENSOR|ERROR|SABOTAGE=Sabotage
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_A=Message in position down
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_A|CLOSED=closed
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_A|NO_MSG=no message
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_A|OPEN=open
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_A|TILTED=tilted
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_B=Message in landscape position
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_B|CLOSED=closed
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_B|NO_MSG=no message
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_B|OPEN=open
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_B|TILTED=tilted
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_C=Message in position top
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_C|CLOSED=closed
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_C|NO_MSG=no message
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_C|OPEN=open
|
|
ROTARY_HANDLE_SENSOR|MSG_FOR_POS_C|TILTED=tilted
|
|
ROTARY_HANDLE_SENSOR|STATE|CLOSED=Window status: locked
|
|
ROTARY_HANDLE_SENSOR|STATE|OPEN=Window status: open
|
|
ROTARY_HANDLE_SENSOR|STATE|TILTED=Window status: tilted
|
|
ROTARY_HANDLE_TRANSCEIVER=Window twist-handle contact
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_A=Message in position down
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_A|CLOSED=closed
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_A|NO_MSG=no message
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_A|OPEN=open
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_A|TILTED=tilted
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_B=Message in landscape position
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_B|CLOSED=closed
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_B|NO_MSG=no message
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_B|OPEN=open
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_B|TILTED=tilted
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_C=Message in position top
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_C|CLOSED=closed
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_C|NO_MSG=no message
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_C|OPEN=open
|
|
ROTARY_HANDLE_TRANSCEIVER|MSG_FOR_POS_C|TILTED=tilted
|
|
ROTARY_HANDLE_TRANSCEIVER|STATE|CLOSED=Window status: locked
|
|
ROTARY_HANDLE_TRANSCEIVER|STATE|OPEN=Window status: open
|
|
ROTARY_HANDLE_TRANSCEIVER|STATE|TILTED=Window status: tilted
|
|
ROUTER_MODULE_ENABLED=Device serves as router
|
|
RSSI_DEVICE=RSSI device
|
|
RSSI_PEER=RSSI peer
|
|
SABOTAGE_MSG=Sabotage message
|
|
SECTION=Profile section:
|
|
SECTION_STATUS|NORMAL=Status Section: Normal
|
|
SECTION_STATUS|UNKNOWN=Status Section: Unknown
|
|
SELF_CALIBRATION_RESULT|FALSE=Calibration run not required
|
|
SELF_CALIBRATION_RESULT|TRUE=Teach-in procedure successful
|
|
SELF_CALIBRATION|START=Start calibration run
|
|
SELF_CALIBRATION|STOP=End calibration run
|
|
SENSOR_ERROR|FALSE=Sensor OK
|
|
SENSOR_ERROR|TRUE=Sensor disturbed
|
|
SENSOR_FOR_CARBON_DIOXIDE=Air quality sensor
|
|
SENSOR_FOR_CARBON_DIOXIDE|EVENT_FILTERTIME=Filter time
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_A=Message at normal CO2 concentration
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_A|LEVEL_NORMAL=CO2 concentration normal
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_A|NO_MSG=no message
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_B=Message at increased CO2 concentration
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_B|LEVEL_ADDED=CO2 concentration increased
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_B|LEVEL_ADDED_STRONG=CO2 concentration greatly increased
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_B|LEVEL_NORMAL=CO2 concentration normal
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_B|NO_MSG=no message
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_C=Message at significantly increased CO2 concentration
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_C|LEVEL_ADDED=CO2 concentration increased
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_C|LEVEL_ADDED_STRONG=CO2 concentration greatly increased
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_C|LEVEL_NORMAL=CO2 concentration normal
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_C|NO_MSG=no message
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_D=Message at greatly increased CO2 concentration
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_D|LEVEL_ADDED=CO2 concentration increased
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_D|LEVEL_ADDED_STRONG=CO2 concentration greatly increased
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_D|LEVEL_NORMAL=CO2 concentration normal
|
|
SENSOR_FOR_CARBON_DIOXIDE|MSG_FOR_POS_D|NO_MSG=no message
|
|
SENSOR_FOR_CARBON_DIOXIDE|STATE|LEVEL_ADDED=CO2 concentration increased
|
|
SENSOR_FOR_CARBON_DIOXIDE|STATE|LEVEL_ADDED_STRONG=CO2 concentration greatly increased
|
|
SENSOR_FOR_CARBON_DIOXIDE|STATE|LEVEL_NORMAL=CO2 concentration normal
|
|
SENSOR_SENSITIVITY=Sensor sensitivity
|
|
SENSOR|FALSE=closed
|
|
SENSOR|INPUT_LOCKED=Input locked
|
|
SENSOR|TRUE=open
|
|
SET_TEMPERATURE=Setpoint temperature
|
|
SHUTTER_CONTACT=Shutter contact
|
|
SHUTTER_CONTACT_HMIP=Shutter contact
|
|
SHUTTER_CONTACT_HMIP|ERROR|SABOTAGE=Sabotage
|
|
SHUTTER_CONTACT_HMIP|MSG_FOR_POS_A=Message in position open
|
|
SHUTTER_CONTACT_HMIP|MSG_FOR_POS_A|NO_MSG=no message
|
|
SHUTTER_CONTACT_HMIP|MSG_FOR_POS_A|OPEN=open
|
|
SHUTTER_CONTACT_HMIP|MSG_FOR_POS_B=Message in position closed
|
|
SHUTTER_CONTACT_HMIP|MSG_FOR_POS_B|CLOSED=closed
|
|
SHUTTER_CONTACT_HMIP|MSG_FOR_POS_B|NO_MSG=no message
|
|
SHUTTER_CONTACT_HMIP|MSG_FOR_POS_B|OPEN=open
|
|
SHUTTER_CONTACT_HMIP|STATE|CLOSED=closed
|
|
SHUTTER_CONTACT_HMIP|STATE|FALSE=closed
|
|
SHUTTER_CONTACT_HMIP|STATE|OPEN=open
|
|
SHUTTER_CONTACT_HMIP|STATE|TRUE=open
|
|
SHUTTER_CONTACT|ERROR|SABOTAGE=Sabotage
|
|
SHUTTER_CONTACT|MSG_FOR_POS_A=Message in position closed
|
|
SHUTTER_CONTACT|MSG_FOR_POS_A|CLOSED=closed
|
|
SHUTTER_CONTACT|MSG_FOR_POS_A|NO_MSG=no message
|
|
SHUTTER_CONTACT|MSG_FOR_POS_A|OPEN=open
|
|
SHUTTER_CONTACT|MSG_FOR_POS_B=Message in position open
|
|
SHUTTER_CONTACT|MSG_FOR_POS_B|CLOSED=closed
|
|
SHUTTER_CONTACT|MSG_FOR_POS_B|NO_MSG=no message
|
|
SHUTTER_CONTACT|MSG_FOR_POS_B|OPEN=open
|
|
SHUTTER_CONTACT|STATE|CLOSED=closed
|
|
SHUTTER_CONTACT|STATE|FALSE=closed
|
|
SHUTTER_CONTACT|STATE|OPEN=open
|
|
SHUTTER_CONTACT|STATE|TRUE=open
|
|
SHUTTER_TRANSMITTER|ACTIVITY_STATE|DOWN=Shutter moves down
|
|
SHUTTER_TRANSMITTER|ACTIVITY_STATE|STABLE=Shutter not moving
|
|
SHUTTER_TRANSMITTER|ACTIVITY_STATE|UNKNOWN=Shutter activity unknown
|
|
SHUTTER_TRANSMITTER|ACTIVITY_STATE|UP=Shutter moves up
|
|
SHUTTER_TRANSMITTER|LEVEL=Blind level
|
|
SHUTTER_TRANSMITTER|LEVEL_2=Slats position
|
|
SHUTTER_TRANSMITTER|PROCESS|NOT_STABLE=Shutter moves
|
|
SHUTTER_TRANSMITTER|PROCESS|STABLE=Shutter not moving
|
|
SHUTTER_VIRTUAL_RECEIVER=Shutter actuator
|
|
SHUTTER_VIRTUAL_RECEIVER|ACTIVITY_STATE|DOWN=Shutter moves down
|
|
SHUTTER_VIRTUAL_RECEIVER|ACTIVITY_STATE|STABLE=Shutter not moving
|
|
SHUTTER_VIRTUAL_RECEIVER|ACTIVITY_STATE|UNKNOWN=Shutter activity unknown
|
|
SHUTTER_VIRTUAL_RECEIVER|ACTIVITY_STATE|UP=Shutter moves up
|
|
SHUTTER_VIRTUAL_RECEIVER|LEVEL=Blind level
|
|
SHUTTER_VIRTUAL_RECEIVER|LEVEL_2=Slats position
|
|
SHUTTER_VIRTUAL_RECEIVER|PROCESS|NOT_STABLE=Shutter moves
|
|
SHUTTER_VIRTUAL_RECEIVER|PROCESS|STABLE=Shutter not moving
|
|
SHUTTER_VIRTUAL_RECEIVER|STOP=Stop
|
|
SIGNAL=Confirmation signal
|
|
SIGNAL_CHIME=Signal actuator (acoustically)
|
|
SIGNAL_CHIME|ACT_NUM=Number of signals
|
|
SIGNAL_CHIME|ACT_TYP=Type of signals
|
|
SIGNAL_CHIME|ON_TIME=Switch-on time
|
|
SIGNAL_CHIME|STATE|FALSE=Off
|
|
SIGNAL_CHIME|STATE|TRUE=On
|
|
SIGNAL_LED=Signal actuator (visual)
|
|
SIGNAL_LED|ACT_NUM=Number of signals
|
|
SIGNAL_LED|ACT_TYP=Type of signals
|
|
SIGNAL_LED|ON_TIME=Switch-on time
|
|
SIGNAL_LED|STATE|FALSE=Off
|
|
SIGNAL_LED|STATE|TRUE=On
|
|
SIGNAL_TONE=Sound confirmation signal
|
|
SIGNAL_TONE|HIGH=high
|
|
SIGNAL_TONE|LOW=low
|
|
SIGNAL_TONE|MID=mid
|
|
SIGNAL_TONE|VERY_HIGH=very high
|
|
SIMPLE_SWITCH_RECEIVER=Switch actor
|
|
SMOKE_DETECTOR_ALARM_STATUS|IDLE_OFF=Standby
|
|
SMOKE_DETECTOR_ALARM_STATUS|INTRUSION_ALARM=Burglar alarm
|
|
SMOKE_DETECTOR_ALARM_STATUS|PRIMARY_ALARM=Local alarm
|
|
SMOKE_DETECTOR_ALARM_STATUS|SECONDARY_ALARM=Alarm triggered by other device
|
|
SMOKE_DETECTOR_COMMAND|COMMUNICATION_TEST=Communication test
|
|
SMOKE_DETECTOR_COMMAND|COMMUNICATION_TEST_REPEATED=Communication test (forwarded)
|
|
SMOKE_DETECTOR_COMMAND|INTRUSION_ALARM=Burglar alarm
|
|
SMOKE_DETECTOR_COMMAND|INTRUSION_ALARM_OFF=Burglar alarm deactivated
|
|
SMOKE_DETECTOR_COMMAND|SMOKE_TEST=Smoke test
|
|
SMOKE_DETECTOR_EVENT|ALARM_OFF=Alarm deactivated
|
|
SMOKE_DETECTOR_EVENT|ALARM_OFF_REPEATED=Alarm deactivated (forwarded)
|
|
SMOKE_DETECTOR_EVENT|INTRUSION_ALARM=Burglar alarm
|
|
SMOKE_DETECTOR_EVENT|INTRUSION_ALARM_REPEATED=Burglar alarm (forwarded)
|
|
SMOKE_DETECTOR_EVENT|LOW_BAT=Weak battery
|
|
SMOKE_DETECTOR_EVENT|LOW_BAT_REPEATED=Weak battery (forwarded)
|
|
SMOKE_DETECTOR_EVENT|PRIMARY_ALARM=Local alarm
|
|
SMOKE_DETECTOR_EVENT|SECONDARY_ALARM=Alarm triggered by other device
|
|
SMOKE_DETECTOR_TEAM=Smoke detector
|
|
SMOKE_DETECTOR_TEAM_V2=Smoke detector
|
|
SMOKE_DETECTOR_TEAM_V2|STATE|FALSE=No smoke detected
|
|
SMOKE_DETECTOR_TEAM_V2|STATE|TRUE=Smoke detected
|
|
SMOKE_DETECTOR_TEAM|STATE|FALSE=No smoke detected
|
|
SMOKE_DETECTOR_TEAM|STATE|TRUE=Smoke detected
|
|
SMOKE_DETECTOR_TEST_RESULT|COMMUNICATION_TEST_OK=Communication test passed
|
|
SMOKE_DETECTOR_TEST_RESULT|COMMUNICATION_TEST_SENT=Communication test send
|
|
SMOKE_DETECTOR_TEST_RESULT|NONE=No system test
|
|
SMOKE_DETECTOR_TEST_RESULT|SMOKE_TEST_FAILED=System test failed
|
|
SMOKE_DETECTOR_TEST_RESULT|SMOKE_TEST_OK=System test passed
|
|
SMOKE_DETECTOR|ERROR_ALARM_TEST|ALARM_TEST_FAILED=Alarm test failure
|
|
SMOKE_DETECTOR|ERROR_ALARM_TEST|NO_ERROR=Alarm test OK
|
|
SMOKE_DETECTOR|ERROR_SMOKE_CHAMBER|DEGRADED_SMOKE_CHAMBER=Smoke chamber error
|
|
SMOKE_DETECTOR|ERROR_SMOKE_CHAMBER|NO_ERROR=Smoke chamber ok
|
|
SMOKE_DETECTOR|REPEAT_ENABLE=Forwarding of received data telegrams
|
|
SMOKE_DETECTOR|STATE|FALSE=No smoke detected
|
|
SMOKE_DETECTOR|STATE|TRUE=Smoke detected
|
|
SOFTONOFF=Soft On/Off
|
|
SOUNDFILE|DO_NOT_CARE=Proceed with current title
|
|
SOUNDFILE|INTERNAL_SOUNDFILE=Internal device sound
|
|
SOUNDFILE|OLD_VALUE=Title last played
|
|
SOUNDFILE|RANDOM_SOUNDFILE=Shuffle
|
|
SOUND_ID=Alarm signal
|
|
SOUND_LONG=Long
|
|
SOUND_LONG_LONG=Long / Long
|
|
SOUND_LONG_SHORT=Long / Short
|
|
SOUND_LONG_SHORT_SHORT=Long / Short / Short
|
|
SOUND_NO_SOUND=No signal
|
|
SOUND_SHORT=Short
|
|
SOUND_SHORT_SHORT=Short / Short
|
|
SPEED_MULTIPLIER=Factor PWM frequency
|
|
STANDBY_TIME=Time until standby mode
|
|
STATE_RESET_RECEIVER=Suppression of motion detection
|
|
STATE|FALSE=Switching status: Off
|
|
STATE|TRUE=Switching status: On
|
|
STATUSINFO_MINDELAY=Status messages minimum delay time
|
|
STATUSINFO_RANDOM=Status messages random part
|
|
STATUS_INDICATOR=Status display
|
|
STATUS_INDICATOR|INHIBIT|FALSE=Lock inactive
|
|
STATUS_INDICATOR|INHIBIT|TRUE=Lock active
|
|
STATUS_INDICATOR|ON_TIME=Switch-on time
|
|
STATUS_INDICATOR|STATE|FALSE=Switching status off
|
|
STATUS_INDICATOR|STATE|TRUE=Switching status on
|
|
STATUS_MESSAGE_TEXT_ALIGNMENT_LEFT_ALIGNED=Range status message left
|
|
STICKY_UNREACH|FALSE=Device communication was disturbed: No
|
|
STICKY_UNREACH|TRUE=Device communication was disturbed: Yes
|
|
STORM_LOWER_THRESHOLD=Wind alert off threshold
|
|
STORM_UPPER_THRESHOLD=Wind alert on threshold
|
|
SUBMIT=Channel action
|
|
SUNSHINEDURATION=Sunshine duration
|
|
SUNSHINEDURATION_OVERFLOW|FALSE=Overrun counter sunshine: No
|
|
SUNSHINEDURATION_OVERFLOW|TRUE=Overrun counter sunshine: Yes
|
|
SUNSHINE_THRESHOLD=Sunshine threshold
|
|
SUNSHINE_THRESHOLD_OVERRUN=Sunshine
|
|
SUNSHINE_THRESHOLD_OVERRUN|FALSE=currently no sunshine
|
|
SUNSHINE_THRESHOLD_OVERRUN|TRUE=currently sunshine
|
|
SWITCH=Switch actuator
|
|
SWITCH_ACTUATOR=Switch actuator
|
|
SWITCH_INTERFACE=Switch interface
|
|
SWITCH_INTERFACE|PRESS=Activated
|
|
SWITCH_INTERFACE|STATE|FALSE=Switch position: pressed down
|
|
SWITCH_INTERFACE|STATE|TRUE=Switch position: pressed up
|
|
SWITCH_PANIC=Alarm siren (panic channel)
|
|
SWITCH_SENSOR=Alarm siren
|
|
SWITCH_TRANSMIT=Two-position controller wall mounted thermostat
|
|
SWITCH_TRANSMIT|TWO_POINT_HYSTERESIS=Hysteresis
|
|
SWITCH_VIRTUAL_RECEIVER=Switch actuator
|
|
SWITCH|AES_ACTIVE=AES active
|
|
SWITCH|ON_TIME=Switch-on time
|
|
SWITCH|STATE|FALSE=Switching status: off
|
|
SWITCH|STATE|TRUE=Switching status: on
|
|
SWITCH|STATUSINFO_RANDOM_A=To avoid collisions during transmission of +
|
|
TACTILE_SWITCH|FALSE=Operating mode push-button inactive
|
|
TACTILE_SWITCH|TRUE=Operating mode push-button active
|
|
TEMPERATURE=Temperature
|
|
TEMPERATURE_COMFORT=Comfort temperature
|
|
TEMPERATURE_LIMITER|FALSE=Operating mode temperature limit inactive
|
|
TEMPERATURE_LIMITER|TRUE=Operating mode temperature limit active
|
|
TEMPERATURE_LOWERING=Eco temperature
|
|
TEMPERATURE_MAXIMUM=Maximum temperature
|
|
TEMPERATURE_MINIMUM=Minimum temperature
|
|
TEMPERATURE_OFFSET=Temperature offset
|
|
TEMPERATURE_OUT_OF_RANGE|FALSE=Ambient temperature OK
|
|
TEMPERATURE_OUT_OF_RANGE|TRUE=Ambient temperature invalid
|
|
TEMP_HUMIDITY_PARTICULATE_MATTER_TRANSMITTER|INTERVAL_UNIT=Unit of automatic sensor cleaning
|
|
TEMP_HUMIDITY_PARTICULATE_MATTER_TRANSMITTER|INTERVAL_VALUE=Value of automatic sensor cleaning
|
|
THERMALCONTROL_TRANSMIT=Temperature sensor room thermostat
|
|
TILT_SENSOR=Tilt sensor
|
|
TILT_SENSOR|EVENT_FILTERTIME=Filter time
|
|
TILT_SENSOR|MSG_FOR_POS_A=Message in position vertical
|
|
TILT_SENSOR|MSG_FOR_POS_A|CLOSED=closed
|
|
TILT_SENSOR|MSG_FOR_POS_A|NO_MSG=no message
|
|
TILT_SENSOR|MSG_FOR_POS_A|OPEN=open
|
|
TILT_SENSOR|MSG_FOR_POS_B=Message in position horizontal
|
|
TILT_SENSOR|MSG_FOR_POS_B|CLOSED=closed
|
|
TILT_SENSOR|MSG_FOR_POS_B|NO_MSG=no message
|
|
TILT_SENSOR|MSG_FOR_POS_B|OPEN=open
|
|
TILT_SENSOR|STATE|FALSE=Status closed
|
|
TILT_SENSOR|STATE|TRUE=Status open
|
|
TIME_OF_OPERATION=Time of operation
|
|
TRANSMIT_DEV_TRY_MAX=Max. number of transmission attempts
|
|
TRANSMIT_TRY_MAX=Max. number of transmission attempts
|
|
TX_MINDELAY=Minimum transmission interval
|
|
TX_MINDELAY_UNIT=Unit of minimum transmission interval
|
|
TX_MINDELAY_VALUE=Value minimum transmission interval
|
|
TX_THRESHOLD_POWER=TX Difference Power
|
|
TYPICAL_PARTICLE_SIZE=Typical particle size
|
|
UNREACH|FALSE=Device communication OK
|
|
UNREACH|TRUE=Device communication disturbed
|
|
USER_COLOR=Channel action
|
|
USER_PROGRAM=Channel action
|
|
VALVE_MAXIMUM_POSITION=maximum valve opening position
|
|
VALVE_STATE=Valve position
|
|
VALVE_STATE|ADAPTION_DONE=Adaption run performed
|
|
VALVE_STATE|ADAPTION_IN_PROGRESS=Adaption run active
|
|
VALVE_STATE|ADJUSTMENT_TOO_BIG=Valve positioning range too large
|
|
VALVE_STATE|ADJUSTMENT_TOO_SMALL=Valve positioning range too small
|
|
VALVE_STATE|ERROR_POSITION=Valve in error position
|
|
VALVE_STATE|RUN_TO_START=Valve reverses to the initial position (vale is opened entirely)
|
|
VALVE_STATE|STATE_NOT_AVAILABLE=Valve status unknown
|
|
VALVE_STATE|TOO_TIGHT=Valve sluggish/blocked
|
|
VALVE_STATE|WAIT_FOR_ADAPTION=Waiting for adaption run
|
|
VENT_CLOSED=Close valve
|
|
VENT_OPEN=Open valve
|
|
VIR-LG-ONOFF-CH|LEVEL|FALSE=Switching status: Off
|
|
VIR-LG-ONOFF-CH|LEVEL|TRUE=Switching status: On
|
|
VIRTUAL_DIMMER=Dimming actuator
|
|
VIRTUAL_DIMMER|ERROR_OVERHEAT=Overheat
|
|
VIRTUAL_DIMMER|ERROR_OVERLOAD=Overload
|
|
VIRTUAL_DIMMER|ERROR_REDUCED=Temperature critical (load reduction)
|
|
VIRTUAL_DIMMER|ERROR|LOAD_FAILURE=Load error
|
|
VIRTUAL_DIMMER|LOGIC_COMBINATION=Connection rule
|
|
VIRTUAL_DIMMER|POWERUP_ACTION=Activity on power supply
|
|
VIRTUAL_DIMMER|RAMP_STOP=Stop dimming ramp
|
|
VIRTUAL_DIMMER|STATUSINFO_RANDOM=Status messages random part
|
|
VIRTUAL_DUAL_WHITE_COLOR|LEVEL=Colour value
|
|
VIRTUAL_DUAL_WHITE_COLOR|LEVEL_REAL=Colour value real channel
|
|
VIRTUAL_DUAL_WHITE_COLOR|OLD_LEVEL=Last value
|
|
VIRTUAL_DUAL_WHITE_COLOR|RAMP_STOP=Stop colour change
|
|
VIRTUAL_DUAL_WHITE_COLOR|RAMP_TIME=Ramp time for colour change
|
|
VIRTUAL_KEY=Virtual remote control
|
|
VIRTUAL_KEY|LEVEL=Send percentage
|
|
VOLTAGE=Voltage
|
|
VOLTAGE_0=Value (relative) for control voltage at 0%
|
|
VOLTAGE_100=Value (relative) for control voltage at 100%
|
|
VOLUME_0=Volume 0%
|
|
VOLUME_10=Volume 10%
|
|
VOLUME_100=Volume 100%
|
|
VOLUME_20=Volume 20%
|
|
VOLUME_30=Volume 30%
|
|
VOLUME_40=Volume 40%
|
|
VOLUME_50=Volume 50%
|
|
VOLUME_60=Volume 60%
|
|
VOLUME_70=Volume 70%
|
|
VOLUME_80=Volume 80%
|
|
VOLUME_90=Volume 90%
|
|
WAKEUP_BEHAVIOUR=Immediate reaction to keypress without choosing a channel
|
|
WAKEUP_BEHAVIOUR_STATUS_MSG_CONFIRMATION=Button press evaluation status message
|
|
WAKEUP_BEHAVIOUR_STATUS_MSG_RESISTANCE=Status message can be deleted only via CCU
|
|
WAKEUP_BEHAVIOUR_STATUS_SIGNALIZATION_CONFIRMATION=Button press evaluation signalling
|
|
WAKEUP_DEFAULT_CHANNEL=Initial channel when activating
|
|
WALLMOUNTED_THERMOSTAT=Wall Thermostat
|
|
WATERDETECTIONSENSOR=Water detector
|
|
WATERDETECTIONSENSOR|EVENT_FILTERTIME=Filter time
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_A=Dry conditions
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_A|DRY=Dry
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_A|NO_MSG=no message
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_B=Humidity
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_B|DRY=Dry
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_B|NO_MSG=no message
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_B|WATER=Water level detected
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_B|WET=Humidity detected
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_C=Water level
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_C|NO_MSG=no message
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_C|WATER=Water level detected
|
|
WATERDETECTIONSENSOR|MSG_FOR_POS_C|WET=Humidity detected
|
|
WATERDETECTIONSENSOR|STATE|DRY=Dry
|
|
WATERDETECTIONSENSOR|STATE|WATER=Water level detected
|
|
WATERDETECTIONSENSOR|STATE|WET=Humidity detected
|
|
WATERLEVEL_DETECTED|FALSE=Water level detected: No
|
|
WATERLEVEL_DETECTED|TRUE=Water level detected: Yes
|
|
WATER_DETECTION_TRANSMITTER=Water sensor
|
|
WATER_DETECTION_TRANSMITTER|ALARMSTATE|FALSE=Humidity or water level detected: No
|
|
WATER_DETECTION_TRANSMITTER|ALARMSTATE|TRUE=Humidity or water level detected: Yes
|
|
WEATHER=Weather sensor
|
|
WEATHER_RECEIVER=Radiator Thermostat (Receiver weather data)
|
|
WEATHER_TRANSMIT|ALARMSTATE|FALSE=Humidity or water level detected: No
|
|
WEATHER_TRANSMIT|ALARMSTATE|TRUE=Humidity or water level detected: Yes
|
|
WEATHER_TRANSMIT|HUMIDITY=Relative humidity
|
|
WEATHER_TRANSMIT|TEMPERATURE=Temperature
|
|
WEEK_PROGRAM_CHANNEL_LOCKS=Channels in auto mode
|
|
WEEK_PROGRAM_TARGET_CHANNEL_LOCKS=Channels for mode week program (binary)
|
|
WEEK_PROGRAM_TARGET_CHANNEL_LOCK|AUTO_MODE_WITHOUT_RESET=week program: Auto without reset
|
|
WEEK_PROGRAM_TARGET_CHANNEL_LOCK|AUTO_MODE_WITH_RESET=week program: Auto with reset (reset without function)
|
|
WEEK_PROGRAM_TARGET_CHANNEL_LOCK|MANU_MODE=week program: Manually
|
|
WHITE=Colour temperature
|
|
WINDOW_STATE=Window status
|
|
WINDOW_SWITCH_RECEIVER=Radiator thermostat
|
|
WIND_DIR=Wind direction
|
|
WIND_DIRECTION=Wind direction
|
|
WIND_DIRECTION_RANGE=Wind direction fluctuation range
|
|
WIND_DIR_RANGE=Wind direction fluctuation range
|
|
WIND_SPEED=Wind velocity
|
|
WIND_SPEED_RESULT_SOURCE=Type of wind velocity value
|
|
WIND_SPEED_RESULT_SOURCE|AVERAGE_VALUE=Average
|
|
WIND_SPEED_RESULT_SOURCE|MAX_VALUE=Maximum value
|
|
WIND_THRESHOLD_OVERRUN|FALSE=Wind threshold not exceeded
|
|
WIND_THRESHOLD_OVERRUN|TRUE=Wind threshold exceeded
|
|
WINMATIC=Window tilt actuator
|
|
WINMATIC|ERROR|MOTOR_TILT_ERROR=Error tilt actuator
|
|
WINMATIC|ERROR|MOTOR_TURN_ERROR=Error rotary actuator
|
|
WINMATIC|LEVEL=Tilt position
|
|
WINMATIC|LEVEL|LOCKED=Window locked
|
|
WINMATIC|MOUNT_SIDE=Mounting side
|
|
WINMATIC|MOUNT_SIDE|LEFT=Left
|
|
WINMATIC|MOUNT_SIDE|RIGHT=Right
|
|
WINMATIC|PULL_FORCE=Power tilt actuator for closing
|
|
WINMATIC|PUSH_FORCE=Power tilt actuator for opening
|
|
WINMATIC|RELOCK_DELAY=Lock automatically after
|
|
WINMATIC|RELOCK_DELAY|NOT_USED=Do not lock automatically
|
|
WINMATIC|SPEED=Speed for action triggered by CCU command
|
|
WINMATIC|STATE_UNCERTAIN|FALSE=Window status known
|
|
WINMATIC|STATE_UNCERTAIN|TRUE=Window status unknown
|
|
WINMATIC|STOP=Stop
|
|
WINMATIC|TILT_MAX=maximum tilt range
|
|
WS_CS=Weather data center
|
|
WS_TH=Weather data center
|
|
MINUTES=min
|