| hostName | The host name or IP address of the thermostat. Mandatory. |
| refresh | Overrides the refresh interval of the thermostat data. Optional, the default is 2 minutes. |
| logRefresh | Overrides the refresh interval of the run-time logs & humidity data. Optional, the default is 10 minutes. |
| isCT80 | Flag to enable additional features only available on the CT80 thermostat. Optional, the default is false. |
| disableLogs | Disable retrieval of run-time logs from the thermostat. Optional, the default is false. |
| setpointMode | Controls temporary or absolute setpoint mode. In "temporary" mode the thermostat will temporarily maintain the given setpoint until the next scheduled setpoint time period. In "absolute" mode the thermostat will ignore its program and maintain the given setpoint indefinitely. Optional, the default is "temporary". |
| clockSync | Flag to enable the binding to sync the internal clock on the thermostat to match the openHAB host's system clock. Sync occurs at binding startup and every hour thereafter. Optional, the default is **true**. |
### Schedule Configuration
The heating and cooling program schedules that persist on the thermostat can be configured by the binding.
Click the 'Show advanced' checkbox on the Thing configuration page to display the schedule.
For both the heating and cooling programs, the 7-day repeating schedule has 4 setpoint periods per day (Morning, Day, Evening, Night).
In order for the heating or cooling program to be valid, all time and setpoint fields must be populated.
The time is expressed in 24-hour (HH:mm) format and the time value for each successive period within a day must be greater than the previous period.
Once the schedule is populated and the configuration saved, the new schedule will be sent to the thermostat during binding initialization, overwriting its existing schedule.
If one or more time or setpoint fields are left blank in a given schedule and the configuration saved, the Thing will display a configuration error until the entries are corrected.
A heating or cooling schedule with all fields left blank will be ignored by the binding.
In that case, the existing schedule on the thermostat will remain untouched.
If the thermostat schedule is to be managed by openHAB, the thermostat should be de-provisioned from the MyRadioThermostat/EnergyHub cloud service to prevent the openHAB schedule from being overridden.
The thermostat can de-provisioned from the cloud by issuing the following `curl` commands:
```shell
curl http://$THERMOSTAT_IP/cloud -d '{"enabled":0}' -X POST
curl http://$THERMOSTAT_IP/cloud -d '{"authkey":""}' -X POST
- The main caveat for using this binding is to keep in mind that the web server in the thermostat is very slow. Do not over load it with excessive amounts of simultaneous commands.
- When changing the thermostat mode, the current temperature set point is cleared and a refresh of the thermostat data is done to get the new mode's set point.
- Since retrieving the thermostat's data is the slowest operation, it will take several seconds after changing the mode before the new set point is displayed.
- The 'Program Mode' command is untested and according to the published API is only available on a CT80 Rev B.
- Humidity information is available only when using a CT80 thermostat.
| temperature | Number:Temperature | The current temperature reading of the thermostat |
| humidity | Number:Dimensionless | The current humidity reading of the thermostat (CT80 only) |
| mode | Number | The current operating mode of the HVAC system |
| fan_mode | Number | The current operating mode of the fan |
| program_mode | Number | The program schedule that the thermostat is running (CT80 Rev B only) |
| set_point | Number:Temperature | The current temperature set point of the thermostat |
| status | Number | Indicates the current running status of the HVAC system |
| fan_status | Number | Indicates the current fan status of the HVAC system |
| override | Number | Indicates if the normal program set-point has been manually overridden |
| hold | Switch | Indicates if the current set point temperature is to be held indefinitely |
| remote_temp | Number:Temperature | Override the internal temperature as read by the thermostat's temperature sensor; Set to -1 to return to internal temperature mode |
| day | Number | The current day of the week reported by the thermostat (0 = Monday) |
