The page was missing information in some places (e.g. some supported
modules were not listed at all,) and some outdated information in
others. Some examples were malformed, and some wording didn’t flow too
well. The section on Channels is still pretty iffy, but I left this as
an exercise for a future me or somebody else :)
Signed-off-by: Simonas Kazlauskas <openhab@kazlauskas.me>
Follow on to #15427
ring-mqtt sends `"name": ""`, not `"name": null` or simply omitting it,
so be sure to handle that way as well
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [mqtt.homeassistant] handle null component name
channels from such components will not have a group. this is
now done by zigbee2mqtt for the "default" component of a device,
such as the light. HASS encourages this as of release 2023.8
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [mqtt.homeassistant] support color temp on JSON schema lights
also adds a color_mode channel if color temp is possible, so you can
know how the bulb is behaving
* put color mode channel construction into buildChannels()
---------
Signed-off-by: Cody Cutrer <cody@cutrer.us>
Depending on device configuration and used central [1], HM devices may
indicate long press repetition either by a single PRESS_CONT event or by
a PRESS_CONT + PRESS_LONG combination. In the latter case, make sure to
not generate a LONG_REPEATED trigger channel event for both PRESS_CONT
and PRESS_LONG, but instead keep LONG_REPEATED generation to the
PRESS_CONT handling.
[1] I'm not sure what a real CCU is doing, but for Homegear, a
configured long press timeout of less than 1s generates only
PRESS_CONT, while a timeout of more than 1s generates
PRESS_CONT + PRESS_LONG ... see [2].
[2] https://github.com/Homegear/Homegear-HomeMaticBidCoS/blob/master/src/BidCoSPeer.cpp#L1711-L1716
Signed-off-by: Danny Baumann <dannybaumann@web.de>
* Fix resource leak when discovery handling failed and NPE when a IPv6
address is reported.
* remove callApi(request/innerRequest from Shelly1HttpApi, which changes
to callApi/httpRequest in ShellyHttpCLient.
Signed-off-by: Markus Michels <markus7017@gmail.com>
* New translations sonos.properties (French)
* New translations influxdb.properties (French)
* New translations netatmo.properties (French)
* New translations jpa.properties (French)
* New translations chatgpt.properties (French)
It seems that Bountysource has been shut down as the website isn't reachable anymore and they don't respond to support mails.
Signed-off-by: mueller-ma <mueller-ma@users.noreply.github.com>
* [influxdb] Improve connection handling
Especially for InfluxDB2 the connection check was not properly implemented. It only checked if a connections was ever successfully established. Since we removed the full crash when a write error occured, this lead to a situation where a broken connection was not detected. A ping is now implemented and also a failed write results in a disconnect.
---------
Signed-off-by: Jan N. Klug <github@klug.nrw>
* [fineoffsetweatherstation] Improve tracing
* [fineoffsetweatherstation] Fix wrong handling temperature reading for of WH34
Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>
* Added a few new channels:
- cleaning the mop
- check if mop drying is enabled
- remaining time for mop drying
Signed-off-by: David Kumar <github@truidix.de>
Some devices report "Window covering controller" instead of "Window covering device". They are controlled in the same way.
Signed-off-by: Jan N. Klug <github@klug.nrw>
Simonas KazlauskasandGitHub
Cody CutrerandGitHub
Jacob LaursenandGitHub
Markus MichelsandGitHub
maniac103andGitHub
Dan CunninghamandGitHub
Hakan TandoganandGitHub
mlobsteinandGitHub
openhab-botandGitHub
Gaël L'hopitalandGitHub
lsiepelandGitHub
mueller-maandGitHub
J-N-KandGitHub
PatrickandGitHub
Robert DandGitHub
hutcheonkandGitHub
Andreas BergerandGitHub
Jamie TownsendandGitHub
Andrew Fiddian-GreenandGitHub
truidixandGitHub
Konstantin PolihronovandGitHub
jimtngandGitHub
Holger FriedrichandGitHub
Bernd WeymannandGitHub
ChristianandGitHub