* [velux] make vanePosition channel dynamic
* [velux] change category of window position from 'blinds' to 'window'
Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>
* Add CPU load channel, update dependencies
* use PercentType, correct process CPU load
* Add and fix test
Signed-off-by: Mark Herwege <mark.herwege@telenet.be>
When a user has configured additional settings on a PoE port, like name.
These settings where lost when changing the PoEPort status in openHAB.
This was because in the binding only some information of the override was stored and when writing the new state this information would have been sent too.
In this change the object to store the override has been replaced by a plain json object. Therefore we don't have to know what is in it and all information is kept.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* Taking configured onvalue into account when sending status to actuator
* Added documentation for onValue configuration
Signed-off-by: Haavar Valeur <haavar@haavar.com>
Re-use the same pattern as defined in class DateTimeTyoe.
Allows the support of 0 to 9 digits after the seconds.
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* Using default onvalue if configured is null
* Using DTO for channel configuration. Changing channel config parameter names to camel case
Signed-off-by: Haavar Valeur <haavar@haavar.com>
* Added INCREASE/DECREASE commands for brightness/color Channels
* Fixed NPE in HeatingModel
* Use set unmapped color command for color control of bulbs
Signed-off-by: Christoph Weitkamp <github@christophweitkamp.de>
* [mimictts] Use http method POST instead of GET
Using POST method allows longer request size.
Also, using InputStreamResponseListener avoid keeping the response in-memory
* [mimictts] quick fix for regression : providing length
Some audiosink needs it
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [fineoffsetweatherstation] add support for the new GW2001 weather station with its WH90 sensor
* [fineoffsetweatherstation] add missing channel labels
* [fineoffsetweatherstation] remove redundant translations
* [fineoffsetweatherstation] add test data + fix for WH90
* [fineoffsetweatherstation] fix wrong size for `CMD_READ_RAIN`
Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>
Using the pool prevents exceptions like:
```
java.nio.channels.ClosedByInterruptException: null
at java.nio.channels.spi.AbstractInterruptibleChannel.end(AbstractInterruptibleChannel.java:199) ~[?:?]
at sun.nio.ch.FileChannelImpl.endBlocking(FileChannelImpl.java:162) ~[?:?]
at sun.nio.ch.FileChannelImpl.size(FileChannelImpl.java:388) ~[?:?]
at org.rrd4j.core.RrdNioBackend.<init>(RrdNioBackend.java:94) ~[?:?]
at org.rrd4j.core.RrdNioBackendFactory.open(RrdNioBackendFactory.java:163) ~[?:?]
at org.rrd4j.core.RrdBackendFactory.getBackend(RrdBackendFactory.java:521) ~[?:?]
at org.rrd4j.core.RrdDb.<init>(RrdDb.java:627) ~[?:?]
at org.rrd4j.core.RrdDb.of(RrdDb.java:500) ~[?:?]
at org.openhab.persistence.rrd4j.internal.RRD4jPersistenceService.getDB(RRD4jPersistenceService.java:323) ~[?:?]
at org.openhab.persistence.rrd4j.internal.RRD4jPersistenceService.store(RRD4jPersistenceService.java:141) ~[?:?]
at org.openhab.persistence.rrd4j.internal.RRD4jPersistenceService.lambda$0(RRD4jPersistenceService.java:211) ~[?:?]
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:515) [?:?]
at java.util.concurrent.FutureTask.run(FutureTask.java:264) [?:?]
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:304) [?:?]
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) [?:?]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) [?:?]
at java.lang.Thread.run(Thread.java:829) [?:?]
```
Fixes#13297
Also includes a few code improvements.
Signed-off-by: Wouter Born <github@maindrain.net>
* Fixed null pointer exception on state update with missing state
* Added variable for state. Changed onvalue configuration type to integer.
Signed-off-by: Haavar Valeur <haavar@haavar.com>
Minor change which gives more properties to detected things, which
should make a little easyer for users with these devices to identify them.
Signed-off-by: Jørgen Austvik <jaustvik@acm.org>
* [jrubyscripting] Update to jruby 9.3.7.0
* [jrubyscripting] Exception fixed in jruby 9.3.7.0
The BootstrapMethodError should no longer be thrown by jruby since 9.3.7. Fixed in https://github.com/jruby/jruby/pull/7271
Signed-off-by: Jimmy Tanagra <jcode@tanagra.id.au>
* Fixes a concurrent modification exception, cleans up handler on dispose, fixes totally broken last contact channel
Fixes#13094
Signed-off-by: Dan Cunningham <dan@digitaldan.com>
* [tado] fix npe when target temperature json element is missing
* [tado] apply temperature command/value restrictions
Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>
* The Automower Connect API Authentication does not work anymore as they moved to a new authentication method. (AppKey and AppSecret) - adopted. Fixes issue #12980.
Signed-off-by: Boris Krivonog <boris.krivonog@inova.si>
* Adding base URL to config to allow for manually adding thing
* Simplified reading of the base URL configuration. Renamed field to baseUrl to be consistent.
* Changed config parameters to camel case
Signed-off-by: Haavar Valeur <haavar@haavar.com>
* Removed provider header, no longer necessary
* Fixed connection tracker not starting after some websocket restarts
Signed-off-by: Gerhard Riegler <gerhard.riegler@gmail.com>
For all models providing these information and relying on ASCII protocol.
The binding now supports reading of status message containing variable length content.
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* [velux] use new API, and log StatusReply codes
Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>
Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>
* [sonos] Added support of RadioApp music service
* Extract artist and song title from TITLE
* Extract code in methods to reduce the size of the method updateMediaInformation
* Create new class and add tests
Fix#13208
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* - bug fix in konnnected handler to update change of smarthome units to Units
- multiple changes to code to enable support for the konnected pro-module
* Added optional configuration for callback URI
* Added support for more than one buzzer sound. Made zone/pin variables consistent. Removed preconfigured channels to be consistent (either all should be added or none).
Signed-off-by: Haavar Valeur <haavar@haavar.com>
* [knx] Add support for KNX IP Secure
* add support for KNX IP Secure, new options SECURETUNNEL and
SECUREROUTER, refers to #8872
* add config options for credentials for secure connections
* update user documentation
* add test cases
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
given:
```
Group eThermostat { homekit="Thermostat" }
Number:Temperature Thermostat_AmbTemp (eThermostat) { homekit="CurrentTemperature" }
Number:Temperature Thermostat_SetTemp (eThermostat) { homekit="TargetTemperature" }
Group gThermostatZoneContacts
// in reality there are multiple thermostats and multiple of these groups,
// so that a rule on members of gThermostatZoneContacts can find the related
// thermostat to turn it off when a window is open
Group:Contact:OR(OPEN,CLOSED) gWindows (eThermostat, gThermostatZoneContacts)
Contact Window_Contact (gWindows) { homekit="ContactSensor" }
```
When constructing the Thermostat accessory for eThermostat, detects the
Window_Contact as a mandatory characteristic, because it's a base accessory
in a nested group. This leads to lots of warnings about the temperature
value of a contact item being out of range.
The fix is two-fold - first of all, there's no reason to search nested
groups for characteristics of a complex accessory. Second of all,
even if for some reason you were to nest an accessory in an accessory,
the nested accessory does not actually belong to the outer accessory,
so don't add it as a mandatory characteristic of the outer.
I suspect there's still one more bug, because AbstractHomekitAccessoryImpl.
getCharacteristic(HomekitCharacteristicType.CURRENT_TEMPERATURE) was
returning Window_Contact, which is only tagged as a ContactSensor. But
after fixing the above two bugs, it was no longer reproducible, and I
didn't continue digging.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [jrubyscripting] check if gems are installed before installing them
this avoids unecessary downloads and overwrites, or even more importantly
errors if the GEM_HOME is not writable by the openhab user.
this also adds a configuration option for if you want to check for
updates every time configuration is applied (or openhab restarts). this
is useful if your OpenHAB system can't access the internet regularly.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [nibeheatpump] Added PRODINo ESP32 Ethernet v1 board support
Also added:
- telnet debug support (UDP debug removed)
- new configuration model
- OTA update support for PRODINo ESP32 Ethernet v1 board
Signed-off-by: Pauli Anttila <pauli.anttila@gmail.com>
* Fix thing offline on invalid command
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Rename exception
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Go back to last thing status after temporary disruptions
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Increase call frequency after device being unreachable
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Minor bugfixes from hardening
Signed-off-by: Markus Michels <markus7017@gmail.com>
* review changes applied
Signed-off-by: Markus Michels <markus7017@gmail.com>
* controlProfile is type String
Signed-off-by: Markus Michels <markus7017@gmail.com>
Concerns the models RSP-1570, RSP-1572 and RSX-1562
BYPASS as DSP mode is also removed for these models.
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* [rotel] Add missed command to switch between ProLogic modes
All models using the HEX protocol are concerned.
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* Optimize API calls for reduced load
* Add position tracking (on map)
* Provide faster updates when active
* Optimize state update after triggering commands
* Clean up duration variables
* Add initial test coverage for DeviceStatus
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Move test providers to dedicated folder
* Simplify resource loading
* Clarify what is being tested
* Extract online communication test to separate class
* Fix SAT findings
* Rename variable to comply with naming convention
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
support. In general Gen1 and Gen2 devices have a total different API so
I spliced the API code in version/gen 1 and 2. This means restructuring
the classes (e.h. api+coap became api+api1+api2) and therefor dummy
changes in the code, e.g. import statements. This creates a lot of
overhead and separating those "dummy changes" simplifies merging the
actual PR.
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Refresh cutting times right after next planned cutting
* Cancel cutting time future unconditionally
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [fineoffsetweatherstation] add support for ELV protocol
* [fineoffsetweatherstation] remove german translations
* [fineoffsetweatherstation] add representationProperty for gateway, fix unit of irradiation-uv
* [fineoffsetweatherstation] add representationProperties in descriptor xml file
* [fineoffsetweatherstation] set channels values to undef in case of communication errors
* [fineoffsetweatherstation] use lock for request synchronisation
* [fineoffsetweatherstation] marke sensors as gone, if they got unpaired
resolves#12763
Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>
* Fix communication error when no planned next cutting
* Provide targeted handling of missing cutting times
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [rotel] Add support of multiple zones (ASCII protocol)
Models C8 and C8+ (distribution amplifiers)
Code factorization.
Simulator updated.
* Set model/firmware thing properties (ASCII V2 protocol)
* Review comment: NumberOf rather than Nb
* Review comment: getZoneCommand: IllegalArgumentException if numZone is
outside 1-4
* Review comment: constant for volumeUpDown
* Simplification: method isPowerOn with numZone parameter (range 0-4)
* Review comment: fix for getPowerOffCommand
* Review comment: new method isZoneAvailable to factorize code
* Review comment: use MAX_NUMBER_OF_ZONES to check range validity
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
Separate Venstar thermostat API calls to change the away mode or
schedule-enabled mode so that the POST to the thermostat's REST
API settings endpoint contains only one of these two params.
Newer ColorTouch thermostat firmwares will reject any POSTs to the
settings endpoint that include the 'schedule' parameter when the
thermostat is currently in AWAY mode, regardless of the value
passed for 'schedule'. This had the effect of preventing the
OpenHab binding from un-setting away mode.
Signed-off-by: David Eberhart <git@daveeberhart.com>
* New translations astro.properties (Hungarian)
* New translations chromecast.properties (Hungarian)
* New translations darksky.properties (Hungarian)
* New translations coronastats.properties (Hungarian)
* New translations evohome.properties (Hungarian)
* New translations mcd.properties (Italian)
* New translations amazondashbutton.properties (Italian)
* New translations openwebnet.properties (Italian)
* New translations openhabcloud.properties (Italian)
* New translations voicerss.properties (Italian)
* New translations tado.properties (Italian)
* New translations wled.properties (Italian)
* New translations livisismarthome.properties (Italian)
* Allow hostname as gateway network address
* Document configuration parameters for things
* Add message for bridge communication error
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* - new device types added
- min firmware set to 1.8.2
- unit for gas concentration fixed (ppm)
- Auto numbering on channel labels for groups with multiple instances
(add sequence suffix)
- API and Thing interfaces defined to restrict access to those classes
- fix on TRV boost update via CoAP
- fix for status.temperature and status.uptime, internalTemp channels
- don’t use meter timestamp if not present (RGBW2)
- low battery indicator for sensor devices fixed
- device detection based on model/type improved
- various messages/translations fixed/improved
- README updated (missing thing types added)
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* missing properties added
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* minor changes
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* markdown fixed
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* review changes applied
Signed-off-by: Markus Michels <markus7017@gmail.com>
* shelly_de.properties restored from main branch
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Switch to fork of gatt parser library in order to fix incompatibility with xstream
* Add SAT suppressions
* Add gson dependency
Signed-off-by: Kai Kreuzer <kai@openhab.org>
* [mimictts] Initial contribution
Add a voice service for Mimic (version 3) TTS from Mycroft AI.
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [lcn] Add shutter positioning/angle, operating hours counters, tunable white, regulator mode, beeping
Also, fix possible race condition during connecting, when the PC coupler is not connected to the LCN data wire.
Replace discontinued LCN-PKE by LCN-VISU.
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
* [goecharger] fix data type for energy (nrg)
* nrg need to be double for V2
* [goecharger] update example
Signed-off-by: Reinhard Plaim <reinhardplaim@gmail.com>
* Fix multiple authentications during initialization
* Fix cutting times being fetched twice during initialization
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Add missing specialized text for unreachable device
* Document IndegoUnreachableException on relevant paths
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Fix auto-update policy for stateless channel
* Reflect appliance state in switch channel state
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [openhabcloud] Makes the baseURL and item updates options advanced, cleans up documentation, disabled sending updates to the community myopenHAB.org service.
Fixes#12582
Signed-off-by: Dan Cunningham <dan@digitaldan.com>
Subchannels were created by appending the key. However this was done inside a loop and if multiple updates were needed they would be appended to the channel name, instead of taking the channel name each time.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* New translations enigma2.properties (Norwegian)
* New translations enigma2.properties (Hungarian)
* New translations enigma2.properties (Norwegian)
* New translations iCloud.properties (Finnish)
* New translations tradfri.properties (Finnish)
* New translations map.properties (Finnish)
* New translations googletts.properties (German)
* New translations voicerss.properties (Finnish)
* New translations xmltv.properties (Finnish)
* New translations exec.properties (Finnish)
* New translations jinja.properties (Finnish)
* New translations js.properties (Finnish)
* New translations regex.properties (Finnish)
* New translations jsonpath.properties (Finnish)
* New translations scale.properties (Finnish)
* New translations xslt.properties (Finnish)
* New translations xpath.properties (Finnish)
* New translations opensprinkler.properties (Finnish)
* New translations porcupineks.properties (Finnish)
* New translations netatmo.properties (Finnish)
* New translations imperihome.properties (Finnish)
* [pidcontroller] Implement previous state recovery on startup
This feature allows the PID controller parameters to be updated and
OpenHAB to be restarted without losing the current controller state.
This is especially important for systems with a long response time.
For example it might take up to a day for an underfloor heating
controller to stabilise after losing state and having to build up
the integrator value from zero.
Signed-off-by: Lenno Nagel <lenno@nagel.ee>
* Change logger.info -> logger.debug
Signed-off-by: Lenno Nagel <lenno@nagel.ee>
* Change debug Item -> inspector Item in README
Signed-off-by: Lenno Nagel <lenno@nagel.ee>
* Add documentation regarding state persistence
Signed-off-by: Lenno Nagel <lenno@nagel.ee>
* Update bundles/org.openhab.automation.pidcontroller/README.md
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
* Update bundles/org.openhab.automation.pidcontroller/README.md
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
Co-authored-by: Fabian Wolter <github@fabian-wolter.de>
* Adaptation of the login for API version 1.1
* Fixed logging statement
* Fixed logging message
* Reverted changes in the german translation
Signed-off-by: Gerhard Riegler <gerhard.riegler@gmail.com>
* New translations googletts.properties (French)
* New translations googletts.properties (German)
* New translations googlestt.properties (German)
* New translations googlestt.properties (French)
* DALI: Implement DT8 (single-channel RGB & color temperature) device type, fix device and group addressing
* dali: Store BridgeHandler in a local variable instead of retrieving it over and over again.
* dali: Follow logging guidelines.
Signed-off-by: Sebastian Philipp <github-ebqurd@s3lph.me>
* New translations boschindego.properties (Danish)
* New translations remoteopenhab.properties (German)
* New translations remoteopenhab.properties (Hungarian)
Starting with openHAB 3.3, the framework enforces using serial
ports which are detected by the system by default. This feature
is now disabled for the KNX addon to allow using symlinks to
ports as well.
Refers-to: openhab/openhab-core#3014
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Clarify handling of initial read and readInterval in documentation.
Updated labels to distinguish readInterval and pollInterval.
Fixes#12921.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* [ipcamera] Fix multiple part handling for Dahua events
* [ipcamera] Call processSettings only when data contains no boundary
Signed-off-by: Jimmy Tanagra <jcode@tanagra.id.au>
* Fix compiler warning
* Add basic test coverage for DataItem deserialization
* Add full prefixes to attributes variables
* Add missing newlines at end of test payload files
* Add full prefix to attributes variable
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* New translations unifi.properties (Dutch)
* New translations upnpcontrol.properties (Dutch)
* New translations elroconnects.properties (Dutch)
* New translations danfossairunit.properties (Danish)
* New translations elroconnects.properties (French)
* New translations nikohomecontrol.properties (Dutch)
* [wundergroundupdatereceiver] Add "Outdoor" to humidity
* [wundergroundupdatereceiver] Missing units in description and patterns
* [wundergroundupdatereceiver] Replace "weather station" with device
The request sender is not necessarily a weather station
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
These tests use the real website which causes unwanted load, network connections and test failures.
See: https://github.com/openhab/openhab-addons/actions/runs/2529936944
```
[ERROR] Tests run: 2, Failures: 0, Errors: 2, Skipped: 0, Time elapsed: 4.109 s <<< FAILURE! - in org.openhab.binding.ahawastecollection.internal.AhaCollectionScheduleTest
[ERROR] org.openhab.binding.ahawastecollection.internal.AhaCollectionScheduleTest.testGetValuesForRegion Time elapsed: 3.294 s <<< ERROR!
org.jsoup.UnsupportedMimeTypeException: Unhandled content type. Must be text/*, application/xml, or application/*+xml
at org.openhab.binding.ahawastecollection.internal.AhaCollectionScheduleTest.testGetValuesForRegion(AhaCollectionScheduleTest.java:42)
[ERROR] org.openhab.binding.ahawastecollection.internal.AhaCollectionScheduleTest.testGetValuesForHannoverCity Time elapsed: 0.726 s <<< ERROR!
org.jsoup.UnsupportedMimeTypeException: Unhandled content type. Must be text/*, application/xml, or application/*+xml
at org.openhab.binding.ahawastecollection.internal.AhaCollectionScheduleTest.testGetValuesForHannoverCity(AhaCollectionScheduleTest.java:33)
```
Signed-off-by: Wouter Born <github@maindrain.net>
* [wundergroundupdatereceiver] Initial implementation
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Code review
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Fix some description formatting
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Add some more channel types per request
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Add more headers to response
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
Based on the observed headers from actual traffic to wunderground.com.
* [wundergroundupdatereceiver] Discovery service
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Upgrade to 3.2, fix group name constants
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Add a list of channel types
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Add dateutc as synthetic DateTime channel
Also add som emore constants
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Do more programmatic configuration
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] More readme
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Update copyright year
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Handle multiple instance request parameters
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
Ie. those that can have an index number in the name, fx. temp1f, temp2f
* [wundergroundupdatereceiver] Add unmapped but mappable channels
To support multiple devices any new parameters that are submitted cause a new channel to be created
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Don't pass superfluous config to channels
Also documentation additions
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Add generated i18n file
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Re-case test method names
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
* [wundergroundupdatereceiver] Re-word thing file section of README
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
Co-authored-by: Daniel Demus <dde@nine.dk>
* Enhance server side error handling
* Enhancing exception tree
* a small factorization of error status
* Shorten statusMessage
* Correcting log syntax
Signed-off-by: clinique <gael@lhopital.org>
* Treat HDPowerViewWebTargets as non-null since initialized by initialize()
* Simplify maintenance period logic slightly
* Improve response logging
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Add support for localization of textualstate texts
* Refactor state texts to eliminate redundancy
Fixes#12941
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Add example for configuring ser2net version 4 and above
The format for ser2net configuration has changed to a YAML file.
This PR simply adds an example yaml block showing a working ser2net connection with the Oppo Bluray player.
* Bump openhab-js version to 2.0.0
* Update README for current openhab-js version
* README: Fix paths to images
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* [insteon] set device offline if it doesn't exist in the plm/hub database
* [insteon] use a flag to indicate if a device is linked or not
* [insteon] set config to @NonNullByDefault({}) instead of @Nullable
* [insteon] cleanup
Signed-off-by: Rob Nielsen <rob.nielsen@yahoo.com>
- Initial version added (copied and renamed from the innogysmarthome binding)
- The local API is now used, authorization, bridge initialization and discovery is already working
- Potential NullPointerExceptions fixed
- Adding battery-low-Channel support for ISC2
- More optimizations and local API changes in the ReadMe
- The key button counter channels are now updated correctly. The according trigger channels should now also work fine.
- Bug fixes regarding button pressed event. The pressed event is now executed along with short and long press events, so if someone want to react on a button press (short or long), the PRESSED trigger event can get checked. And the pressed event isn't senseless executed on a binding restart anymore.
- Error messages improved
- Deprecation-Notice
- New deprecation warning integrated in the innogysmarthome binding
- Livisi renamed to LIVISI
- SHC channels are now initialized correctly
- New "status" channel for the SHC with the values ACTIVE, INITIALIZING and SHUTTINGDOWN
- Code and documentation optimizations
- Fix for PT-PSS action
- Support for SHC classic - The websocket is hosted on another port.
- Update for Temperature-Channel-Definitions and Translations (de)
- Update for Power-Channel-Definitions
- Further translations (de) for devices and channels
- Refactoring branch integrated (some tests added and a lot of code optimizations for example smaller methods, better method names, more simple flows without continue and return in void methods, improved NULL handling, etc.)
- Code optimization (special handling for VariableActuator removed which seems to be not required anymore)
- The thing status is now set to offline when the device is not reachable (even on binding start up)
- The thing status is now set to online again when the device is reachable again
- Clearer description of the invert switch of the RollerShutter (ISR2)
- Copyright notices corrected
- Imports optimized
- Changed handling of pointTemperature (QuantityType instead of DecimalType)
- Code optimization (device status listeners are now registered with device id, so it isn't necessary anymore to call all listeners to find the right matching listener for the device event).
- Code optimization (not working mDNS bridge discovery removed).
- Explicit idle timeout removed (seems not to be required anymore for the local API and may cause problems with SHC 1, there occur EOFExceptions)
- Code optimizations (Debug code removed which isn't required anymore)
- Warn message added which is logged when the temperature to set is not between min and max temperature (this can happen when the user uses the REST-API instead of MainUI or probably also when set via a rule).
- Code optimizations (stronger/consequent use of QuantityType instead of DecimalType)
- Temperature values outside the possible range of 6 - 30 °C are now set to 6 / 30 °C. Therefore a temperature channel can get set to 0 °C for example by a rule and this is automatically changed to 6 °C (and causes a debug message).
- Code optimizations
- Bug fixes regarding UnitsOfMeasurements (Number:Power)
- Tests repaired
- The local API returns "[]" for empty objects which should only get used for arrays... This is now handled by the binding with replacing "[]" by "null". This error occurred with SHC 1, it isn't known if SHC 2 is also affected.
- Number:Dimensionless (percent) introduced for humidity and luminance
- Button events are now supported for SHC 1 (Classic), but without information about short or long press (isn't available for this SHC model).
- Button events are now supported for SHC 1 (Classic), but without information about short or long press (isn't available for this SHC model).
- The configVersion is now also available for SHC 1 bridges.
- More changes to Descriptions, Translations, Icons, Channel-Order, Channel-Config
- Trace logging of responses added to increase the traceability
- The SHC channels should now also get filled for SHC classic
- cpu, memory and disc channels are now defined as percentage (Number:Dimensionless)
- Jetty-HttpClient replaced by simple UrlConnection, because Jetty-HttpClient has problems with high frequency execution of requests. There were EOFExceptions with SHC classic when 2 or more requests were executed within the same second...
- Readme updated
- Copyright notices corrected
- Additions in ReadMe for RST2 / WRT
- The bridge channels (cpu, memory, disc and operation state) are now updated every minute for SHC 1 / classic (because there are no such events for SHC 1 / classic)
- Bug-fix for SHC 1 / classic: Device attributes are now updated correctly for SHC 1 / classic (there is another response structure, which caused that some attributes were not found / update). This should have affected battery low and reachable (thing status) information.
- There are also raw events which report changes regarding the bridge channels (cpu, memory, disc and operation status). There are now processed.
- Token request JSON changed to lower-case (to be compatible with the new SHC firmware update and this should enable to use the standard logics)
- SHC 2 can now get authenticated with the OAuth 2.0 standard logics of OpenHAB (with x-www-form-urlencoded instead of json). The old special json logic is still there to support SHC 1 (but SHC 1 will also get updated soon).
- SHC 1 supports now short and long button pressed events
- Outdated custom login logics removed. SHC 2 and SHC 1 / classic supports now OAuth 2.0 login requests, therefore the default login logics of OpenHAB can now get used.
- README updated for the required software version of SHC 1 / classic
- Code review findings fixed
- Code review findings fixed (Channel Ids renamed to lowerCamelCase)
- Unused code removed
- Code review findings fixed (Device status messages localized)
- Code review findings fixed (label of BooleanStateActuator renamed)
- Code review findings fixed (hard-coded units resolved)
- Code review findings fixed (unit of measurements changed form Power to Energy when it is unit Wh instead of W)
- Code review findings fixed (thing status BRIDGE_OFFLINE changed to COMMUNICATION_ERROR, because BRIDGE_OFFLINE is intended for sub/child devices, not for the bridge thing)
- Code review findings fixed ("initialize" is now returned faster and all requests are executed asynchronously)
- Code review findings fixed ("initialize" is now returned faster and all requests are executed asynchronously)
- Compiler warnings fixed
- Code review findings fixed
- Code review findings fixed (channel ids renamed)
- Code review findings fixed (tags for temperature and humidity added)
- Code review findings fixed (properties renamed to lowerCamelCase like the default properties)
- Code review findings fixed (non-null warnings fixed, performance increased by reducing requests)
- Code review findings fixed (non-null warnings fixed)
- Code review findings fixed (non-null warnings fixed in tests)
- Copyright notices updated
- Unnecessary log line removed
- Code review findings fixed (non-null warnings fixed in tests)
- Test fixed (WebSocketClient can't get mocked completely which caused an Exception)
- Code review findings fixed (various code optimizations)
- Code review findings fixed (channel-type-ids renamed to lowerCamelCase)
- Code review findings fixed (translation simplified)
- Code review findings fixed (temperature point handling converted in UoM)
- Code review findings fixed (Exception handling improved)
- Code review findings fixed (offline state precised when the bridge isn't found/configured)
- Code review findings fixed (exception logs deactivated within tests to reduce to console output when running the tests)
- Code review findings fixed (thing status is now checked instead of bridge status)
- Code review findings fixed (DeviceStructureManager can now be marked as NonNull because it is initialized within the initialize method)
- Code review findings fixed (LivisiClient can now be marked as NonNull because it is initialized within the initialize method)
- Code review findings fixed (OAuthService can now be marked as NonNull because it is initialized within the initialize method)
- Code review findings fixed (unnecessary type check removed)
- Code review findings fixed (warning messages within tests reduced)
- Code review findings fixed (more when the bridge connection state changes)
- Code review findings fixed (reconnect job changed from scheduleAtFixedRate to scheduleWithFixedDelay - recommended by the SAT warnings).
- Code review findings fixed (unused method removed).
- Representation property introduced to auto-ignore textual defined things at discovery/scan
- Code review findings fixed (more detailed error message for SHC not reachable added).
- Fix ChannelTypeID in Readme.md sample
- Code review findings fixed ("/event/ControllerConnectivityChanged" doesn't change the bridge thing to offline anymore, because it isn't important for the local API anymore).
- Code review findings fixed (point temperature commands with DecimalType instead of QuantityType can now also get handled).
- Tests added regarding handleCommand
- Code optimization (constant for the "invert" channel parameter added)
- Code optimization (log messages within tests avoided)
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
Co-authored-by: RalphSester <ralph.sester@sester-edv.de>
* [gardena] Fix handling of websocket connection losses that causes memory leaks
* The binding no longer restarts websockets more than once if the connection is lost
Signed-off-by: Nico Brüttner <n@bruettner.de>
* New translations amazondashbutton.properties (French)
* New translations icalendar.properties (French)
* New translations luxom.properties (French)
* New translations amazondashbutton.properties (French)
* [groupepsa] Fix syntax of documentation and minor spelling improvements
- Fix syntax of documentation and minor spelling improvements
Signed-off-by: Christoph Weitkamp <github@christophweitkamp.de>
Co-authored-by: Jacob Laursen <jacob-github@vindvejr.dk>
* New translations miele.properties (German)
* New translations remoteopenhab.properties (German)
* New translations mqtt.properties (German)
* New translations metrics.properties (German)
* New translations boschindego.properties (German)
* New translations gpstracker.properties (German)
* New translations onkyo.properties (German)
* New translations tado.properties (German)
* New translations telegram.properties (German)
* New translations jruby.properties (German)
* New translations bluetooth.properties (German)
* New translations bluetooth.properties (German)
* New translations bluetooth.properties (German)
* New translations bluetooth.properties (German)
* New translations bluetooth.properties (German)
* New translations bluetooth.properties (German)
* New translations bluetooth.properties (German)
* New translations bluetooth.properties (German)
* New translations bluetooth.properties (German)
* New translations imperihome.properties (German)
* [fronius] Add additional Inverter DC channels
* [fronius] Update channel description and translations
* [fronius] Add calculated DC Power channels
Signed-off-by: Jimmy Tanagra <jcode@tanagra.id.au>
* Set thingStatus earlier in initialize
* Check device configuration
* Make sure to always set thing status
* Make thing status message localizable
Signed-off-by: Mark Herwege <mark.herwege@telenet.be>
* New translations vigicrues.properties (French)
* New translations weatherunderground.properties (French)
* New translations xmltv.properties (French)
* New translations renault.properties (French)
* New translations ntp.properties (French)
* New translations ntp.properties (German)
* New translations sagercaster.properties (French)
* New translations ntp.properties (Hungarian)
* New translations ntp.properties (Turkish)
* Do not set thing status before end of initialization
* Change ThingStatusDetail when no communication object
* Change bridge config error messages
* Bridge status changed handling
* Check bridge status in handler init
Signed-off-by: Mark Herwege <mark.herwege@telenet.be>
* [tado] reconnect offline things if possible & allowed
* [tado] bridge should ping the server every polling cycle
Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>
* Make trigger type items act on off
* Fix gson serializing empty values
* Fix some null pointer warnings
Signed-off-by: Mark Herwege <mark.herwege@telenet.be>
* New translations boschshc.properties (German)
* New translations jinja.properties (German)
* New translations regex.properties (German)
* New translations jsonpath.properties (German)
* New translations xpath.properties (German)
* New translations dynamodb.properties (German)
* New translations jdbc.properties (German)
* New translations neeo.properties (German)
* New translations fsinternetradio.properties (German)
* New translations sonyaudio.properties (German)
* New translations systeminfo.properties (German)
* New translations wemo.properties (German)
* New translations googlestt.properties (German)
* New translations voicerss.properties (German)
* New translations porcupineks.properties (German)
* New translations watsonstt.properties (German)
* New translations voskstt.properties (German)
* New translations deutschebahn.properties (German)
* New translations dwdunwetter.properties (German)
* New translations shelly.properties (German)
* New translations googletts.properties (German)
* New translations http.properties (Italian)
* New translations evcc.properties (German)
* New translations imperihome.properties (Italian)
* New translations voicerss.properties (German)
* New translations dwdunwetter.properties (German)
* [influxdbv1] https://github.com/openhab/openhab-addons/issues/9790 and https://github.com/openhab/openhab-addons/issues/10398 Fix for retention and table names containing InfluxQL keywords or special characters
Signed-off-by: fremel@gmail.com <fremel@gmail.com>
* Revert escaped qoutes on null items
Signed-off-by: fremel@gmail.com <fremel@gmail.com>
* Apply suggestions from code review
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
Co-authored-by: Joan Pujol <joanpujol@gmail.com>
* Apply spotless
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
Co-authored-by: Fabian Wolter <github@fabian-wolter.de>
Co-authored-by: Joan Pujol <joanpujol@gmail.com>
Co-authored-by: Jacob Laursen <jacob-github@vindvejr.dk>
Wait for the thing being initialized properly by the thing manager
before considering it as an active children
Fix#12809
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* Update to using bridge/thing
* remove white channels.
* Improve Discovery
* Add more sleep/ timed light / NL features
* Change advanced channels
* fix bug for sleep duration
* Update readme with new channels
* Move channels into separate readme heading.
* fix white jumps to 0 after moving control.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* Changes API URL and authentication Headers for DB API Marketplace.
* Fixed some typos and code style findings.
Signed-off-by: Sönke Küper <soenkekueper@gmx.de>
* [boschshc] Support for Bosch Intrusion Detection System (#12700)
* Add thing and channel definitions for intrusion detection system
* Extract handler abstraction for devices with non-configurable device
IDs
* Extract service abstractions for write-only services (i.e. services
that can not receive states from the bridge)
* Add handler, services and DTO implementations for the intrusion
detection system
* Add detailed Javadocs
* Generalize mechanism to actively fetch initial states for certain
services
* Add unit tests
* Add documentation
closes#12700
* [boschshc] Documentation and formatting enhancements
Signed-off-by: David Pace <dev@davidpace.de>
* New translations astro.properties (Italian)
* New translations netatmo.properties (Italian)
* New translations fineoffsetweatherstation.properties (Italian)
* [fineoffsetweatherstation] initial commit
* [fineoffsetweatherstation] add missing measure type for air quality
* [fineoffsetweatherstation] add names to sensors
* [fineoffsetweatherstation] add missing channel types for lightning and water leak
* [fineoffsetweatherstation] adjust label names and replaced images + pdf so there are no copyright issues
* [fineoffsetweatherstation] remove wrong semantic tags
* [fineoffsetweatherstation] add missing measurands for WH45 (CO2) and WH35 (Leaf wetness)
* [fineoffsetweatherstation] fix typos
* [fineoffsetweatherstation] improve error handling for unstable connections
* [fineoffsetweatherstation] set online status after successful discovery
* [fineoffsetweatherstation] adjustments after review
* [fineoffsetweatherstation] adjustments after review
* Fix typo
* use `system.wind-speed` where applicable
* fix naming of channel type constants
Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>
Bump all org.bouncycastle bundles to version 1.70 and added new bcutil-jdk15on jar which was added with v1.69
Signed-off-by: Gerd Zanker <gerd.zanker@web.de>
* [unifi] New wiredClient and poePort, Discovery support
This change adds the following changes:
- 2 new things: a wired client and POE port.
- Adds discovery of clients and poePort.
- Adds guest channel to client thing.
Also included some refactoring and bug fixes.
This change includes changes made by Matthew Bowman that he created on his own branch but were never completed.
Closes#9609: Implemented async http call, which should fix the buffer overflow.
Closes#10375: At least should avoid the stack overflow.
Closes#11964: cid will be handled in lower case.
* Removed type from UniFiCache constructor
It's redundant and only used for logging.
* Added UniFi Site and wLAN things
* Improved default state handling
Updated refresh/state update, to also update when no data available.
Simplified usage of cache: call cache directly instead of implicit via controller class.
Made getDefaultState generic to all things, and simplified passing channelId instead of channelUID to sub methods.
* Moved dto objects to dto package.
* Added support for client experience
* Made fields private
No need to have them protected.
* Added PoE power-cycle command
Also added wireless client as command as this better fits with the openHAB model to handle commands that are only one way and not have a state.
* Updated readme
* [unifi] Added client/guest count to wlan
* Fix QRcode construction and added hidden ssid support in qrcode string
Also-by: Matthew Bowman <mgb@otr.mx>
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
Co-authored-by: Matthew Bowman <mgb@otr.mx>
* [renault] Add German translations and small english text fixes. Add missing config parameter to README.
* [renault] Remove German translations.
* [renault] Make config with default and english text sources of truth consistent.
Signed-off-by: Doug Culnane <doug@culnane.net>
* New translations googletts.properties (French)
* New translations googlestt.properties (French)
* New translations voskstt.properties (French)
* New translations watsonstt.properties (French)
* New translations pollytts.properties (French)
* New translations mqtt.properties (French)
* New translations mqtt.properties (French)
* New translations porcupineks.properties (French)
Also avoid the thing to remain in state UNKNOWN if the decoding of the
JSON response is failing.
Fix#12719
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* New translations exec.properties (French)
* New translations jinja.properties (French)
* New translations js.properties (French)
* New translations jsonpath.properties (French)
* New translations regex.properties (French)
* New translations scale.properties (French)
* New translations xslt.properties (French)
* New translations xpath.properties (French)
* New translations renault.properties (French)
* New translations sonnen.properties (French)
* New translations luxom.properties (French)
* New translations luxom.properties (Italian)
* New translations prowl.properties (French)
* New translations prowl.properties (Italian)
* New translations awattar.properties (German)
* New translations vesync.properties (Italian)
* New translations netatmo.properties (Italian)
* [webthing] Fix item type for dynamic channel
* Review comments: use constants from CoreItemFactory
Related to #12712
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
Items with dimensions (QuantityType) are now translated and can be sent to the
KNX bus. This requires the correct DPT to be specified in the channel
definition. Fixes#10706.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* [http] Add tests
* [http] Treat all success codes as such
* All 2xx http codes mean success, so treat them the same way 200 is.
Fixes#11369
Signed-off-by: Corubba Smith <corubba@gmx.de>
* DOCS: Remove old bug warning
The bug that alexa remindes twice was fixed
* {OTHER} Remove trailing spaces
* {DOCS} Adjusted spacing to unify the docs
Signed-off-by: Felix Schneider <fs@felix-schneider.org>
* [boschshc] Support Bosch Smart Home Cameras (#12666)
- add thing definitions for indoor security camera 360 and outdoor
security camera Eyes
- implement services for privacy mode and camera notifications
- implement camera handler
- add unit tests
- update documentation
* [boschshc] Enhance logging and comments (#12666)
* only log on debug level when initial state can not be retrieved
* do not log stack traces
* minor Javadoc fixes
closes#12666
Signed-off-by: David Pace <dev@davidpace.de>
Removed first section from README. These are not rendered in the inline documentation and make the documention (More...) of the binding inside OH show the raw text.
* First alpha version of the awattar binding
Signed-off-by: wolfii <wolfgang.klimt@consol.de>
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Corrected typos
Signed-off-by: wolfii <wolfgang.klimt@consol.de>
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* More typos
Signed-off-by: wolfii <wolfgang.klimt@consol.de>
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Improved time handling to consider time zone.
Signed-off-by: wolfii <wolfgang.klimt@consol.de>
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Corrected logical time problem, start adding nextprice thing
Signed-off-by: wolfii <wolfgang.klimt@consol.de>
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Added support for Austria
Signed-off-by: wolfii <wolfgang.klimt@consol.de>
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Use List instead of Set
Signed-off-by: wolfii <wolfgang.klimt@consol.de>
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Minor corrections
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Removed unneeded handler, corrected fetching of prices
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Added i18n, updated documentation
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Corrected pom.xml after rebase
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Updated version to 3.3.0-SNAPSHOT
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Corrected findings of Code analysis tool
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Updated copyright notice
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Updates to get rid of compiler warnings
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Worked on review comments from @fwolter
Obeyed most of the review comments. Exceptions:
* binding is already added to bom/openhab-addons/pom.xml (at least I found it there and there was a commit notice in git log)
* mvn license:format brought back 2021, so I manually set everything to 2022. Should I try to rebase my whole branch?
* In two places the binding needs to adjust to minute boundaries, hence scheduleWithFixedDelay will not work.
* I removed empty trailing lines, but mvn spotless:apply brought them back
* The OhInfXmlUsageCheck seems to be wrong.
* The ConstantNameCheck in AwattarUtil seems to be mislead by the fact that all members of the class are static, including the logger. From my point of view it is not a real "constant".
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Updated Readme to match code changes
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Further work on review comments from @fwolter
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Corrected config definition
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Changed Copyright to 2022
Signed-off-by: Wolfgang Klimt <github@klimt.de>
* Review comments from @fwolter. Improved timezone handling
Signed-off-by: Wolfgang Klimt <github@klimt.de>
Co-authored-by: wolfii <wolfgang.klimt@consol.de>
* [pulseaudio] Allow flexible parameters to find a given pulseaudio device
To identify the device on the pulseaudio server, you can now use the description instead of the technical id (a.k.a. "name").
To filter furthermore, you can also use the parameter additionalFilters (optional regular expressions that need to match a property value of a device on the pulseaudio server)
Closes#12555
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* Add tests to ensure that parsing works correctly
* Fetch /actions on server sent event
* Refactor onServerSentEvent
* Remove ActionStateFetcher
* Manually construct BigDecimal
Signed-off-by: Björn Lange <bjoern.lange@itemis.de>
* Fix daylight savings when setting date/time
* Use an action to set date/time
* Add default time zone detection and i18n
Signed-off-by: Ethan Dye <mrtops03@gmail.com>
* Added guidance for internet isolation of P110
* Update bundles/org.openhab.binding.tapocontrol/README.md
Co-authored-by: Fabian Wolter <github@fabian-wolter.de>
* TRV support, various fixes & enhancements
Signed-off-by: markus7017 <markus7017@gmail.com>
Signed-off-by: Markus Michels <markus7017@gmail.com>
* #12236 fixed
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: markus7017 <markus7017@gmail.com>
Signed-off-by: Markus Michels <markus7017@gmail.com>
* TRV support competed
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: markus7017 <markus7017@gmail.com>
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Complete TRV support
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: markus7017 <markus7017@gmail.com>
Signed-off-by: Markus Michels <markus7017@gmail.com>
* - TRV polling optimized
Signed-off-by: markus7017 <markus7017@gmail.com>
Signed-off-by: Markus Michels <markus7017@gmail.com>
* # WARNING: head commit changed in the meantime
- Shelly Motion 2 support
- TRV polling optimized
- channel creatiom of ledStatusLed fixed if no ledPowerLed was created
- Handling of sensor.status_error fixed when = no error (0/"0")
- channel timerActive was missing for Dimmer 1/2
- Motion timestamp channels were 1h off
- exception with data format while initializing a bulb fixed
- README updated
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: markus7017 <markus7017@gmail.com>
Signed-off-by: Markus Michels <markus7017@gmail.com>
* - added new TRV value boost minute, polling remnoved on valve position
changes (req. latest firmware)
- fix: don't create accu channels for roller
- fix: fix Id for some status messages
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* log types revised
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* [rotel] Refactor to separate comm handling from protocol handling
Each protocol is now handled in a separate class.
Allow to reduce the size of class RotelConnector
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* buildCommandMessage now throwing RotelException
Comment added when RotelException is catched without any specific
handling
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* [sonos] Discovery of unsupported models without exception
* Unit tests added for method extractModelName
* Replace extractModelName by buildThingTypeIdFromModelName
Transform the found model name into a valid thing type ID when trying
to match a thing type
This could avoid an IllegalArgumentException thrown by the discovery
service when new models will be introduced on the market.
Should be compatible with Bubble UPnP Server which modifies the model
name
A message is now logged for unsupported Sonos models.
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
This is the reference implementation for using the new `TransformationConfigurationRegistry`. The localization tests can be omitted as this is covered by tests in the core component.
Signed-off-by: Jan N. Klug <github@klug.nrw>
* [pulseaudio] small fixes and rewrite
- All classes are now @NonNullByDefault
- all build warnings cleared
- no more need for a watchdog scheduled thread for every pulseaudio device : the bridge now handles sending information to child
- fix bug : exception at startup when child handler try to get information from the bridge too soon is now handled by waiting 2 seconds if necessary
- fix bug : playing MP3 with high bitrate is now OK with the replacement of the ResetableInputStream by a standard BufferedInputStream that handle mark/reset method better
- fix bug : ghost device listener no longer receive event after dispose
- fix bug : discovery doesn't show already added thing anymore
- Updating the status bridge to ONLINE only AFTER the update method is done.
- Use the bridgeStatusChanged method in the childhandler to get opportunity to test if the child could go ONLINE, (and by the way initialize the audiosink and audiosource, has they also need information from the bridge)
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
Co-authored-by: Laurent Garnier <lg.hc@free.fr>
CEMI frame format is used by newer serial devices like kBerry.
Calimero library can be configured to use CEMI instead of default EMI.
Followup on #10407. Relates to #4026.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* New translations digitalstrom.properties (German)
* New translations pixometer.properties (German)
* New translations amazondashbutton.properties (German)
* New translations amazondashbutton.properties (Hungarian)
* New translations amazondashbutton.properties (Italian)
* New translations amazondashbutton.properties (Ukrainian)
* Don't limit serial port options
Related to openhab/openhab-core#2798
* [herzborg] Remove default value for serial port parameter
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
Looks like the new generation of SenecIES power storage systems, which are using LiPo technology, provide additional data in the JSON array.
This data is not available in the old generation, which lead to missing data, when asking for a key and in further null pointer exceptions when going deeper in the data structure.
Therefore making a trivial check to detect the new generation of devices and skip the troubling section entirely.
CON: The section of items would not be updated. A to-do is of course to split the old and new generation into separate models of devices.
Fixes#11606
Also-By: Erwin Guib <eguib@web.de>
Also-By: Korbinian Probst <kp.droid.dev@gmail.com>
Signed-off-by: Thomas Karl Pietrowski <thopiekar@gmail.com>
* [linky] Addressing issue #11642
Apparently all the mess came from default write buffer size of Jetty client. Maybe during an update of jetty lib in the core.
I also corrected daily data that does not seem to accept J+1 anymore and three SAT findings
While I was here, enhanced LinkyException
Signed-off-by: clinique <gael@lhopital.org>
With this simple fix, MaryTTS creates the correct wav header for the audio inputstream (audioformat is now assigned before we use it)
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* Some stations does not report octa dimension, thus leading the binding to incorrect values.
Enhanced discovery process
Code enhancements
SAT corrections
Enhanced Exception catching.
Signed-off-by: clinique <gael@lhopital.org>
* [pidcontroller] Add ability to limit the I-part
* Apply iMinValue & iMaxValue to the integral result accumulator
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
* Set iMinResult, iMaxResult default value to NaN
Co-authored-by: Lenno Nagel <lenno@nagel.ee>
* [homematic] Validate datapoint values before writing to config
HM config datapoint values on some devices can be out of their valid
range in some cases, particularly if they are unused by the device
currently [1]. Since openhab-core now validates attempts to update
configuration by the thing handlers, make sure we always send a valid
configuration even for those affected datapoints.
[1] One example for such behaviour is HmIPW-DRBL4, which has multiple
datapoints which depend on each other
- POWERUP_JUMPTARGET can have values OFF, ON, OFF_DELAY, ON_DELAY
- POWERUP_ONDELAY_VALUE, POWERUP_ONDELAY_UNIT are only used if
POWERUP_JUMPTARGET has value ON_DELAY
- likewise, POWERUP_OFFDELAY_VALUE and POWERUP_OFFDELAY_UNIT are
only used if POWERUP_JUMPTARGET has value OFF_DELAY
- if e.g. the POWERUP_JUMPTARGET is OFF, e.g. POWERUP_ONDELAY_VALUE
might stay uninitialized by CCU and/or device itself, in which
case it may be reported with an invalid value
Signed-off-by: Danny Baumann <dannybaumann@web.de>
On Windows the PrintWriter used in the NutConnector adds different line endings causing some tests to fail.
Signed-off-by: Wouter Born <github@maindrain.net>
On Windows the view has different line endings causing some tests to fail.
For readability the big strings have also been moved into files.
Signed-off-by: Wouter Born <github@maindrain.net>
* Introduce algorithm for preventing excessive currentPower updates
* Increase calculation accuracy
* Rename currentPowerAccurate to currentPowerRaw
* Remove duplicated line
* Use interface when declaring double ended queue
* Reformat README to one sentence per line
* Rename constants for consistency and readability
Fixes#12460
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [tado] fix issue #12160 (first attempt)
* [tado] code style
* [tado] option descriptors
* [tado] add level5
* [tado] fan level and swing not allowed on heating or hot water
* [tado] warn about possible un-supported state values
* [tado] minor formatting
* [tado] harmonise getter methods for fan and swing state
* [tado] include all options in xml
* [tado] remove 's' from capabilities list names (go figure..)
* [tado] add OFF option
* [tado] add support for light channel, and dynamic channel decriptions
* [tado] tweak ReadMe for more clarity
* [tado] adopt reviewer suggestions
Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>
Andrew Fiddian-Green
Mark Herwege
lolodomo
openhab-bot
Hilbrand Bouwkamp
alexf2015
Haavar Valeur
Ondrej Pecta
mlobstein
Christoph Weitkamp
Stewart Cossey
Gwendal Roulleau
Jacob Laursen
Andreas Berger
Wouter Born
Cody Cutrer
Jørgen Austvik
Pumpur
billfor
Pete
Bernd Weymann
Espen Fossen
Bob A
Anders Alfredsson
Sami Salonen
Gaël L'hopital
Sascha Kloß
jimtng
vich-667
Dan Cunningham
Boris Krivonog
Tiller
Björn Lange
CyborgAndy
Gerhard Riegler
Hans-Jörg Merk
dependabot[bot]
Markus Michels
Holger Friedrich
Christian Wild
krikk
pali
Daniel Campbell
0x4d4d
Matt
robnielsen
eugen
Martin Herbst
dae1804
Tim
truidix
J-N-K
Kai Kreuzer
Sebastian P
Peter Aquino
Fabian Wolter
simon-dengler
netwolfuk
Reinhard Plaim
deswong
Lenno Nagel
Mark Hilbush
tb4jc
Nadahar
openhab-bot
Daniel Demus
funkstille
Karel Goderis
Sven Strohschein
GiviMAD
Florian Hotze
Bruetti1991
fremel75
James Melville
Matthew Skinner
Sönke Küper
Andreas Isenmann
Stefan Giehl
David Pace
M Valla
Doug Culnane
Roie Geron
Jonathan Gilbert
Martin Matuška
Daniel Lienert
Giovanni Fabiani
Corubba
Hans Böhm
dag81
Łukasz Dywicki
Felix Schneider
Wolfgang Klimt
Arjan Mels
schmieeed
ulfwin
Kristof Rado
boc-tothefuture
Дилян Палаузов
Ethan Dye
stuart938503
JacekKac
Дилян Палаузов
joepadmiraal
sheilbronn
jesperskriasoft
Thomas Karl Pietrowski
maniac103